提交 c106c7a5 编写于 作者: D Dave Airlie

Merge tag 'drm-intel-fixes-2017-09-20' of...

Merge tag 'drm-intel-fixes-2017-09-20' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes

drm/i915 fixes for 4.14-rc1

Couple fixes for stable:

- Fix MIPI panels on BXT.
- Fix PCI BARs information on GVT.

Plus other fixes:

- Fix minimal brightness for BXT, GLK, CFL and CNL.
- Fix compilation warning: unused in_vbl
- Fix error handling in intel_framebuffer_init

* tag 'drm-intel-fixes-2017-09-20' of git://anongit.freedesktop.org/git/drm-intel:
  drm/i915: Remove unused 'in_vbl' from i915_get_crtc_scanoutpos()
  drm/i915/cnp: set min brightness from VBT
  Revert "drm/i915/bxt: Disable device ready before shutdown command"
  drm/i915/bxt: set min brightness from VBT
  drm/i915: Fix an error handling in 'intel_framebuffer_init()'
  drm/i915/gvt: Fix incorrect PCI BARs reporting
......@@ -197,78 +197,65 @@ static int emulate_pci_command_write(struct intel_vgpu *vgpu,
static int emulate_pci_bar_write(struct intel_vgpu *vgpu, unsigned int offset,
void *p_data, unsigned int bytes)
{
unsigned int bar_index =
(rounddown(offset, 8) % PCI_BASE_ADDRESS_0) / 8;
u32 new = *(u32 *)(p_data);
bool lo = IS_ALIGNED(offset, 8);
u64 size;
int ret = 0;
bool mmio_enabled =
vgpu_cfg_space(vgpu)[PCI_COMMAND] & PCI_COMMAND_MEMORY;
struct intel_vgpu_pci_bar *bars = vgpu->cfg_space.bar;
if (WARN_ON(bar_index >= INTEL_GVT_PCI_BAR_MAX))
return -EINVAL;
/*
* Power-up software can determine how much address
* space the device requires by writing a value of
* all 1's to the register and then reading the value
* back. The device will return 0's in all don't-care
* address bits.
*/
if (new == 0xffffffff) {
/*
* Power-up software can determine how much address
* space the device requires by writing a value of
* all 1's to the register and then reading the value
* back. The device will return 0's in all don't-care
* address bits.
*/
size = vgpu->cfg_space.bar[bar_index].size;
if (lo) {
new = rounddown(new, size);
} else {
u32 val = vgpu_cfg_space(vgpu)[rounddown(offset, 8)];
/* for 32bit mode bar it returns all-0 in upper 32
* bit, for 64bit mode bar it will calculate the
* size with lower 32bit and return the corresponding
* value
switch (offset) {
case PCI_BASE_ADDRESS_0:
case PCI_BASE_ADDRESS_1:
size = ~(bars[INTEL_GVT_PCI_BAR_GTTMMIO].size -1);
intel_vgpu_write_pci_bar(vgpu, offset,
size >> (lo ? 0 : 32), lo);
/*
* Untrap the BAR, since guest hasn't configured a
* valid GPA
*/
if (val & PCI_BASE_ADDRESS_MEM_TYPE_64)
new &= (~(size-1)) >> 32;
else
new = 0;
}
/*
* Unmapp & untrap the BAR, since guest hasn't configured a
* valid GPA
*/
switch (bar_index) {
case INTEL_GVT_PCI_BAR_GTTMMIO:
ret = trap_gttmmio(vgpu, false);
break;
case INTEL_GVT_PCI_BAR_APERTURE:
case PCI_BASE_ADDRESS_2:
case PCI_BASE_ADDRESS_3:
size = ~(bars[INTEL_GVT_PCI_BAR_APERTURE].size -1);
intel_vgpu_write_pci_bar(vgpu, offset,
size >> (lo ? 0 : 32), lo);
ret = map_aperture(vgpu, false);
break;
default:
/* Unimplemented BARs */
intel_vgpu_write_pci_bar(vgpu, offset, 0x0, false);
}
intel_vgpu_write_pci_bar(vgpu, offset, new, lo);
} else {
/*
* Unmapp & untrap the old BAR first, since guest has
* re-configured the BAR
*/
switch (bar_index) {
case INTEL_GVT_PCI_BAR_GTTMMIO:
ret = trap_gttmmio(vgpu, false);
switch (offset) {
case PCI_BASE_ADDRESS_0:
case PCI_BASE_ADDRESS_1:
/*
* Untrap the old BAR first, since guest has
* re-configured the BAR
*/
trap_gttmmio(vgpu, false);
intel_vgpu_write_pci_bar(vgpu, offset, new, lo);
ret = trap_gttmmio(vgpu, mmio_enabled);
break;
case INTEL_GVT_PCI_BAR_APERTURE:
ret = map_aperture(vgpu, false);
case PCI_BASE_ADDRESS_2:
case PCI_BASE_ADDRESS_3:
map_aperture(vgpu, false);
intel_vgpu_write_pci_bar(vgpu, offset, new, lo);
ret = map_aperture(vgpu, mmio_enabled);
break;
}
intel_vgpu_write_pci_bar(vgpu, offset, new, lo);
/* Track the new BAR */
if (mmio_enabled) {
switch (bar_index) {
case INTEL_GVT_PCI_BAR_GTTMMIO:
ret = trap_gttmmio(vgpu, true);
break;
case INTEL_GVT_PCI_BAR_APERTURE:
ret = map_aperture(vgpu, true);
break;
}
default:
intel_vgpu_write_pci_bar(vgpu, offset, new, lo);
}
}
return ret;
......@@ -299,10 +286,7 @@ int intel_vgpu_emulate_cfg_write(struct intel_vgpu *vgpu, unsigned int offset,
}
switch (rounddown(offset, 4)) {
case PCI_BASE_ADDRESS_0:
case PCI_BASE_ADDRESS_1:
case PCI_BASE_ADDRESS_2:
case PCI_BASE_ADDRESS_3:
case PCI_BASE_ADDRESS_0 ... PCI_BASE_ADDRESS_5:
if (WARN_ON(!IS_ALIGNED(offset, 4)))
return -EINVAL;
return emulate_pci_bar_write(vgpu, offset, p_data, bytes);
......@@ -344,7 +328,6 @@ void intel_vgpu_init_cfg_space(struct intel_vgpu *vgpu,
struct intel_gvt *gvt = vgpu->gvt;
const struct intel_gvt_device_info *info = &gvt->device_info;
u16 *gmch_ctl;
int i;
memcpy(vgpu_cfg_space(vgpu), gvt->firmware.cfg_space,
info->cfg_space_size);
......@@ -371,13 +354,13 @@ void intel_vgpu_init_cfg_space(struct intel_vgpu *vgpu,
*/
memset(vgpu_cfg_space(vgpu) + PCI_BASE_ADDRESS_1, 0, 4);
memset(vgpu_cfg_space(vgpu) + PCI_BASE_ADDRESS_3, 0, 4);
memset(vgpu_cfg_space(vgpu) + PCI_BASE_ADDRESS_4, 0, 8);
memset(vgpu_cfg_space(vgpu) + INTEL_GVT_PCI_OPREGION, 0, 4);
for (i = 0; i < INTEL_GVT_MAX_BAR_NUM; i++) {
vgpu->cfg_space.bar[i].size = pci_resource_len(
gvt->dev_priv->drm.pdev, i * 2);
vgpu->cfg_space.bar[i].tracked = false;
}
vgpu->cfg_space.bar[INTEL_GVT_PCI_BAR_GTTMMIO].size =
pci_resource_len(gvt->dev_priv->drm.pdev, 0);
vgpu->cfg_space.bar[INTEL_GVT_PCI_BAR_APERTURE].size =
pci_resource_len(gvt->dev_priv->drm.pdev, 2);
}
/**
......
......@@ -839,7 +839,6 @@ static bool i915_get_crtc_scanoutpos(struct drm_device *dev, unsigned int pipe,
pipe);
int position;
int vbl_start, vbl_end, hsync_start, htotal, vtotal;
bool in_vbl = true;
unsigned long irqflags;
if (WARN_ON(!mode->crtc_clock)) {
......@@ -922,8 +921,6 @@ static bool i915_get_crtc_scanoutpos(struct drm_device *dev, unsigned int pipe,
spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
in_vbl = position >= vbl_start && position < vbl_end;
/*
* While in vblank, position will be negative
* counting up towards 0 at vbl_end. And outside
......
......@@ -14030,7 +14030,7 @@ static int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
if (mode_cmd->handles[i] != mode_cmd->handles[0]) {
DRM_DEBUG_KMS("bad plane %d handle\n", i);
return -EINVAL;
goto err;
}
stride_alignment = intel_fb_stride_alignment(fb, i);
......
......@@ -892,8 +892,6 @@ static void intel_dsi_disable(struct intel_encoder *encoder,
struct intel_crtc_state *old_crtc_state,
struct drm_connector_state *old_conn_state)
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
enum port port;
......@@ -902,15 +900,6 @@ static void intel_dsi_disable(struct intel_encoder *encoder,
intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_BACKLIGHT_OFF);
intel_panel_disable_backlight(old_conn_state);
/*
* Disable Device ready before the port shutdown in order
* to avoid split screen
*/
if (IS_BROXTON(dev_priv)) {
for_each_dsi_port(port, intel_dsi->ports)
I915_WRITE(MIPI_DEVICE_READY(port), 0);
}
/*
* According to the spec we should send SHUTDOWN before
* MIPI_SEQ_DISPLAY_OFF only for v3+ VBTs, but field testing
......
......@@ -1699,6 +1699,8 @@ bxt_setup_backlight(struct intel_connector *connector, enum pipe unused)
if (!panel->backlight.max)
return -ENODEV;
panel->backlight.min = get_backlight_min_vbt(connector);
val = bxt_get_backlight(connector);
val = intel_panel_compute_brightness(connector, val);
panel->backlight.level = clamp(val, panel->backlight.min,
......@@ -1735,6 +1737,8 @@ cnp_setup_backlight(struct intel_connector *connector, enum pipe unused)
if (!panel->backlight.max)
return -ENODEV;
panel->backlight.min = get_backlight_min_vbt(connector);
val = bxt_get_backlight(connector);
val = intel_panel_compute_brightness(connector, val);
panel->backlight.level = clamp(val, panel->backlight.min,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册