omap-serial: Get rid of all pdev->id usage

With Device tree, pdev->id would no longer be Valid.
Hence get rid of all instances of its usage in the
driver. Device tree support for the driver is added
in subsequent patches.
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Reviewed-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

drivers/tty/serial/omap-serial.c

@@ -115,7 +115,7 @@ static void serial_omap_enable_ms(struct uart_port *port)
 {
 	struct uart_omap_port *up = (struct uart_omap_port *)port;
 
-	dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->pdev->id);
+	dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->port.line);
 
 	pm_runtime_get_sync(&up->pdev->dev);
 	up->ier |= UART_IER_MSI;
@@ -419,7 +419,7 @@ static unsigned int serial_omap_tx_empty(struct uart_port *port)
 	unsigned int ret = 0;
 
 	pm_runtime_get_sync(&up->pdev->dev);
-	dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->pdev->id);
+	dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->port.line);
 	spin_lock_irqsave(&up->port.lock, flags);
 	ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
 	spin_unlock_irqrestore(&up->port.lock, flags);
@@ -437,7 +437,7 @@ static unsigned int serial_omap_get_mctrl(struct uart_port *port)
 	status = check_modem_status(up);
 	pm_runtime_put(&up->pdev->dev);
 
-	dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->pdev->id);
+	dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->port.line);
 
 	if (status & UART_MSR_DCD)
 		ret |= TIOCM_CAR;
@@ -455,7 +455,7 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
 	struct uart_omap_port *up = (struct uart_omap_port *)port;
 	unsigned char mcr = 0;
 
-	dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->pdev->id);
+	dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->port.line);
 	if (mctrl & TIOCM_RTS)
 		mcr |= UART_MCR_RTS;
 	if (mctrl & TIOCM_DTR)
@@ -479,7 +479,7 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state)
 	struct uart_omap_port *up = (struct uart_omap_port *)port;
 	unsigned long flags = 0;
 
-	dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->pdev->id);
+	dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->port.line);
 	pm_runtime_get_sync(&up->pdev->dev);
 	spin_lock_irqsave(&up->port.lock, flags);
 	if (break_state == -1)
@@ -505,7 +505,7 @@ static int serial_omap_startup(struct uart_port *port)
 	if (retval)
 		return retval;
 
-	dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->pdev->id);
+	dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line);
 
 	pm_runtime_get_sync(&up->pdev->dev);
 	/*
@@ -546,7 +546,7 @@ static int serial_omap_startup(struct uart_port *port)
 			0);
 		init_timer(&(up->uart_dma.rx_timer));
 		up->uart_dma.rx_timer.function = serial_omap_rxdma_poll;
-		up->uart_dma.rx_timer.data = up->pdev->id;
+		up->uart_dma.rx_timer.data = up->port.line;
 		/* Currently the buffer size is 4KB. Can increase it */
 		up->uart_dma.rx_buf = dma_alloc_coherent(NULL,
 			up->uart_dma.rx_buf_size,
@@ -574,7 +574,7 @@ static void serial_omap_shutdown(struct uart_port *port)
 	struct uart_omap_port *up = (struct uart_omap_port *)port;
 	unsigned long flags = 0;
 
-	dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->pdev->id);
+	dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->port.line);
 
 	pm_runtime_get_sync(&up->pdev->dev);
 	/*
@@ -884,7 +884,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	spin_unlock_irqrestore(&up->port.lock, flags);
 	pm_runtime_put(&up->pdev->dev);
-	dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id);
+	dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->port.line);
 }
 
 static void
@@ -894,7 +894,7 @@ serial_omap_pm(struct uart_port *port, unsigned int state,
 	struct uart_omap_port *up = (struct uart_omap_port *)port;
 	unsigned char efr;
 
-	dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->pdev->id);
+	dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->port.line);
 
 	pm_runtime_get_sync(&up->pdev->dev);
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
@@ -933,7 +933,7 @@ static void serial_omap_config_port(struct uart_port *port, int flags)
 	struct uart_omap_port *up = (struct uart_omap_port *)port;
 
 	dev_dbg(up->port.dev, "serial_omap_config_port+%d\n",
-							up->pdev->id);
+							up->port.line);
 	up->port.type = PORT_OMAP;
 }
 
@@ -950,7 +950,7 @@ serial_omap_type(struct uart_port *port)
 {
 	struct uart_omap_port *up = (struct uart_omap_port *)port;
 
-	dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->pdev->id);
+	dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->port.line);
 	return up->name;
 }
 
@@ -1111,7 +1111,7 @@ static struct console serial_omap_console = {
 
 static void serial_omap_add_console_port(struct uart_omap_port *up)
 {
-	serial_omap_console_ports[up->pdev->id] = up;
+	serial_omap_console_ports[up->port.line] = up;
 }
 
 #define OMAP_CONSOLE	(&serial_omap_console)
@@ -1365,7 +1365,6 @@ static int serial_omap_probe(struct platform_device *pdev)
 		ret = -ENOMEM;
 		goto do_release_region;
 	}
-	sprintf(up->name, "OMAP UART%d", pdev->id);
 	up->pdev = pdev;
 	up->port.dev = &pdev->dev;
 	up->port.type = PORT_OMAP;
@@ -1376,6 +1375,7 @@ static int serial_omap_probe(struct platform_device *pdev)
 	up->port.fifosize = 64;
 	up->port.ops = &serial_omap_pops;
 	up->port.line = pdev->id;
+	sprintf(up->name, "OMAP UART%d", up->port.line);
 
 	up->port.mapbase = mem->start;
 	up->port.membase = ioremap(mem->start, resource_size(mem));
@@ -1418,7 +1418,7 @@ static int serial_omap_probe(struct platform_device *pdev)
 	pm_runtime_enable(&pdev->dev);
 	pm_runtime_get_sync(&pdev->dev);
 
-	ui[pdev->id] = up;
+	ui[up->port.line] = up;
 	serial_omap_add_console_port(up);
 
 	ret = uart_add_one_port(&serial_omap_reg, &up->port);