提交 ba7301c7 编写于 作者: A Andreas Mohr 提交者: Jaroslav Kysela

[ALSA] ALS4000 update

Modules: SB drivers,ALS4000 driver

some update for the ALS4000 driver (tested with hardware in my PC):

- use common control names according to ControlNames.txt
- add some controls (Master Mono, 3D control)
- optimize struct snd_card_als4000_t layout (performance/size)
- save some bytes via unified error path
- constify some read-only data
- add ToDo list
- move GPL license text to top
- add comments
Signed-off-by: NAndreas Mohr <andi@lisas.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 a57d1515
......@@ -669,25 +669,34 @@ static unsigned char snd_dt019x_init_values[][2] = {
/*
* ALS4000 specific mixer elements
*/
/* FIXME: SB_ALS4000_MONO_IO_CTRL needs output select ctrl ! */
static struct sbmix_elem snd_als4000_ctl_mono_output_switch =
SB_SINGLE("Mono Output Switch", SB_ALS4000_MONO_IO_CTRL, 5, 1);
/* FIXME: mono input switch also available on DT019X ? */
static struct sbmix_elem snd_als4000_ctl_mono_input_switch =
SB_SINGLE("Mono Input Switch", SB_DT019X_OUTPUT_SW2, 0, 1);
/* FIXME: SB_ALS4000_MONO_IO_CTRL needs output select ctrl! */
static struct sbmix_elem snd_als4000_ctl_master_mono_playback_switch =
SB_SINGLE("Master Mono Playback Switch", SB_ALS4000_MONO_IO_CTRL, 5, 1);
static struct sbmix_elem snd_als4000_ctl_master_mono_capture_route =
SB_SINGLE("Master Mono Capture Route", SB_ALS4000_MONO_IO_CTRL, 6, 0x03);
/* FIXME: mono playback switch also available on DT019X? */
static struct sbmix_elem snd_als4000_ctl_mono_playback_switch =
SB_SINGLE("Mono Playback Switch", SB_DT019X_OUTPUT_SW2, 0, 1);
static struct sbmix_elem snd_als4000_ctl_mic_20db_boost =
SB_SINGLE("Mic Boost (+20dB)", SB_ALS4000_MIC_IN_GAIN, 0, 0x03);
static struct sbmix_elem snd_als4000_ctl_mixer_out_to_in =
SB_SINGLE("Mixer Out To In", SB_ALS4000_MIC_IN_GAIN, 7, 0x01);
/* FIXME: 3D needs much more sophisticated controls, many more features ! */
static struct sbmix_elem snd_als4000_ctl_3d_output_switch =
SB_SINGLE("3D Output Switch", SB_ALS4000_3D_SND_FX, 6, 0x01);
static struct sbmix_elem snd_als4000_ctl_3d_output_ratio =
SB_SINGLE("3D Output Ratio", SB_ALS4000_3D_SND_FX, 0, 0x07);
static struct sbmix_elem snd_als4000_ctl_3d_poweroff_switch =
static struct sbmix_elem snd_als4000_ctl_mixer_loopback =
SB_SINGLE("Analog Loopback", SB_ALS4000_MIC_IN_GAIN, 7, 0x01);
/* FIXME: functionality of 3D controls might be swapped, I didn't find
* a description of how to identify what is supposed to be what */
static struct sbmix_elem snd_als4000_3d_control_switch =
SB_SINGLE("3D Control - Switch", SB_ALS4000_3D_SND_FX, 6, 0x01);
static struct sbmix_elem snd_als4000_3d_control_ratio =
SB_SINGLE("3D Control - Level", SB_ALS4000_3D_SND_FX, 0, 0x07);
static struct sbmix_elem snd_als4000_3d_control_freq =
/* FIXME: maybe there's actually some standard 3D ctrl name for it?? */
SB_SINGLE("3D Control - Freq", SB_ALS4000_3D_SND_FX, 4, 0x03);
static struct sbmix_elem snd_als4000_3d_control_delay =
/* FIXME: ALS4000a.pdf mentions BBD (Bucket Brigade Device) time delay,
* but what ALSA 3D attribute is that actually? "Center", "Depth",
* "Wide" or "Space" or even "Level"? Assuming "Wide" for now... */
SB_SINGLE("3D Control - Wide", SB_ALS4000_3D_TIME_DELAY, 0, 0x0f);
static struct sbmix_elem snd_als4000_3d_control_poweroff_switch =
SB_SINGLE("3D PowerOff Switch", SB_ALS4000_3D_TIME_DELAY, 4, 0x01);
static struct sbmix_elem snd_als4000_ctl_3d_delay =
SB_SINGLE("3D Delay", SB_ALS4000_3D_TIME_DELAY, 0, 0x0f);
#ifdef NOT_AVAILABLE
static struct sbmix_elem snd_als4000_ctl_fmdac =
SB_SINGLE("FMDAC Switch (Option ?)", SB_ALS4000_FMDAC, 0, 0x01);
......@@ -716,13 +725,15 @@ static struct sbmix_elem *snd_als4000_controls[] = {
&snd_sb16_ctl_pc_speaker_vol,
&snd_sb16_ctl_capture_vol,
&snd_sb16_ctl_play_vol,
&snd_als4000_ctl_mono_output_switch,
&snd_als4000_ctl_mono_input_switch,
&snd_als4000_ctl_mixer_out_to_in,
&snd_als4000_ctl_3d_output_switch,
&snd_als4000_ctl_3d_output_ratio,
&snd_als4000_ctl_3d_delay,
&snd_als4000_ctl_3d_poweroff_switch,
&snd_als4000_ctl_master_mono_playback_switch,
&snd_als4000_ctl_master_mono_capture_route,
&snd_als4000_ctl_mono_playback_switch,
&snd_als4000_ctl_mixer_loopback,
&snd_als4000_3d_control_switch,
&snd_als4000_3d_control_ratio,
&snd_als4000_3d_control_freq,
&snd_als4000_3d_control_delay,
&snd_als4000_3d_control_poweroff_switch,
#ifdef NOT_AVAILABLE
&snd_als4000_ctl_fmdac,
&snd_als4000_ctl_qsound,
......
......@@ -6,6 +6,21 @@
*
* Framework borrowed from Massimo Piccioni's card-als100.c.
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* NOTES
*
* Since Avance does not provide any meaningful documentation, and I
......@@ -43,19 +58,9 @@
* Set KSound:
* - value -> some port 0x0c0d
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
* ToDo:
* - Proper shared IRQ handling?
* - power management? (card can do voice wakeup according to datasheet!!)
*/
#include <sound/driver.h>
......@@ -101,8 +106,9 @@ MODULE_PARM_DESC(joystick_port, "Joystick port address for ALS4000 soundcard. (0
#endif
typedef struct {
struct pci_dev *pci;
/* most frequent access first */
unsigned long gcr;
struct pci_dev *pci;
#ifdef SUPPORT_JOYSTICK
struct gameport *gameport;
#endif
......@@ -146,13 +152,13 @@ static void snd_als4000_set_rate(sb_t *chip, unsigned int rate)
}
}
static void snd_als4000_set_capture_dma(sb_t *chip, dma_addr_t addr, unsigned size)
static inline void snd_als4000_set_capture_dma(sb_t *chip, dma_addr_t addr, unsigned size)
{
snd_als4000_gcr_write(chip, 0xa2, addr);
snd_als4000_gcr_write(chip, 0xa3, (size-1));
}
static void snd_als4000_set_playback_dma(sb_t *chip, dma_addr_t addr, unsigned size)
static inline void snd_als4000_set_playback_dma(sb_t *chip, dma_addr_t addr, unsigned size)
{
snd_als4000_gcr_write(chip, 0x91, addr);
snd_als4000_gcr_write(chip, 0x92, (size-1)|0x180000);
......@@ -177,7 +183,7 @@ static int snd_als4000_get_format(snd_pcm_runtime_t *runtime)
}
/* structure for setting up playback */
static struct {
static const struct {
unsigned char dsp_cmd, dma_on, dma_off, format;
} playback_cmd_vals[]={
/* ALS4000_FORMAT_U8_MONO */
......@@ -201,7 +207,7 @@ static struct {
/* structure for setting up capture */
enum { CMD_WIDTH8=0x04, CMD_SIGNED=0x10, CMD_MONO=0x80, CMD_STEREO=0xA0 };
static unsigned char capture_cmd_vals[]=
static const unsigned char capture_cmd_vals[]=
{
CMD_WIDTH8|CMD_MONO, /* ALS4000_FORMAT_U8_MONO */
CMD_WIDTH8|CMD_SIGNED|CMD_MONO, /* ALS4000_FORMAT_S8_MONO */
......@@ -228,9 +234,9 @@ static int snd_als4000_hw_free(snd_pcm_substream_t * substream)
static int snd_als4000_capture_prepare(snd_pcm_substream_t * substream)
{
unsigned long flags;
sb_t *chip = snd_pcm_substream_chip(substream);
snd_pcm_runtime_t *runtime = substream->runtime;
unsigned long flags;
unsigned long size;
unsigned count;
......@@ -256,9 +262,9 @@ static int snd_als4000_capture_prepare(snd_pcm_substream_t * substream)
static int snd_als4000_playback_prepare(snd_pcm_substream_t *substream)
{
unsigned long flags;
sb_t *chip = snd_pcm_substream_chip(substream);
snd_pcm_runtime_t *runtime = substream->runtime;
unsigned long flags;
unsigned long size;
unsigned count;
......@@ -353,6 +359,18 @@ static snd_pcm_uframes_t snd_als4000_playback_pointer(snd_pcm_substream_t * subs
return bytes_to_frames( substream->runtime, result );
}
/* FIXME: this IRQ routine doesn't really support IRQ sharing (we always
* return IRQ_HANDLED no matter whether we actually had an IRQ flag or not).
* ALS4000a.PDF writes that while ACKing IRQ in PCI block will *not* ACK
* the IRQ in the SB core, ACKing IRQ in SB block *will* ACK the PCI IRQ
* register (alt_port + 0x0e). Probably something could be optimized here to
* query/write one register only...
* And even if both registers need to be queried, then there's still the
* question of whether it's actually correct to ACK PCI IRQ before reading
* SB IRQ like we do now, since ALS4000a.PDF mentions that PCI IRQ will *clear*
* SB IRQ status.
* And do we *really* need the lock here for *reading* SB_DSP4_IRQSTATUS??
* */
static irqreturn_t snd_als4000_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
sb_t *chip = dev_id;
......@@ -698,8 +716,7 @@ static int __devinit snd_card_als4000_probe(struct pci_dev *pci,
-1,
SB_HW_ALS4000,
&chip)) < 0) {
snd_card_free(card);
return err;
goto out_err;
}
chip->pci = pci;
......@@ -716,40 +733,42 @@ static int __devinit snd_card_als4000_probe(struct pci_dev *pci,
if ((err = snd_mpu401_uart_new( card, 0, MPU401_HW_ALS4000,
gcr+0x30, 1, pci->irq, 0,
&chip->rmidi)) < 0) {
snd_card_free(card);
printk(KERN_ERR "als4000: no MPU-401device at 0x%lx ?\n", gcr+0x30);
return err;
printk(KERN_ERR "als4000: no MPU-401 device at 0x%lx?\n", gcr+0x30);
goto out_err;
}
if ((err = snd_als4000_pcm(chip, 0)) < 0) {
snd_card_free(card);
return err;
goto out_err;
}
if ((err = snd_sbmixer_new(chip)) < 0) {
snd_card_free(card);
return err;
goto out_err;
}
if (snd_opl3_create(card, gcr+0x10, gcr+0x12,
OPL3_HW_AUTO, 1, &opl3) < 0) {
printk(KERN_ERR "als4000: no OPL device at 0x%lx-0x%lx ?\n",
printk(KERN_ERR "als4000: no OPL device at 0x%lx-0x%lx?\n",
gcr+0x10, gcr+0x12 );
} else {
if ((err = snd_opl3_hwdep_new(opl3, 0, 1, NULL)) < 0) {
snd_card_free(card);
return err;
goto out_err;
}
}
snd_als4000_create_gameport(acard, dev);
if ((err = snd_card_register(card)) < 0) {
snd_card_free(card);
return err;
goto out_err;
}
pci_set_drvdata(pci, card);
dev++;
return 0;
err = 0;
goto out;
out_err:
snd_card_free(card);
out:
return err;
}
static void __devexit snd_card_als4000_remove(struct pci_dev *pci)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册