提交 b90b9a38 编写于 作者: N Nicolas Pitre 提交者: Nicolas Pitre

ARM: zImage: allow supplementing appended DTB with traditional ATAG data

Some old bootloaders can't be updated to a device tree capable one,
yet they provide ATAGs with memory configuration, the ramdisk address,
the kernel cmdline string, etc.  To allow a device tree enabled
kernel to be used with such bootloaders, it is necessary to convert those
ATAGs into FDT properties and fold them into the DTB appended to zImage.

Currently the following ATAGs are converted:

	ATAG_CMDLINE
	ATAG_MEM
	ATAG_INITRD2

If the corresponding information already exists in the appended DTB, it
is replaced, otherwise the required node is created to hold it.

The code looks for ATAGs at the location pointed by the value of r2 upon
entry into the zImage code.  If no ATAGs are found there, an attempt at
finding ATAGs at the typical 0x100 offset from start of RAM is made.
Otherwise the DTB is left unchanged.

Thisstarted from an older patch from John Bonesio <bones@secretlab.ca>,
with contributions from David Brown <davidb@codeaurora.org>.
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Tested-by: NShawn Guo <shawn.guo@linaro.org>
Tested-by: NDave Martin <dave.martin@linaro.org>
Tested-by: NThomas Abraham <thomas.abraham@linaro.org>
上级 df4879fa
......@@ -1801,6 +1801,18 @@ config ARM_APPENDED_DTB
location into r2 of a bootloader provided DTB is always preferable
to this option.
config ARM_ATAG_DTB_COMPAT
bool "Supplement the appended DTB with traditional ATAG information"
depends on ARM_APPENDED_DTB
help
Some old bootloaders can't be updated to a DTB capable one, yet
they provide ATAGs with memory configuration, the ramdisk address,
the kernel cmdline string, etc. Such information is dynamically
provided by the bootloader and can't always be stored in a static
DTB. To allow a device tree enabled kernel to be used with such
bootloaders, this option allows zImage to extract the information
from the ATAG list and store it at run time into the appended DTB.
config CMDLINE
string "Default kernel command string"
default ""
......
......@@ -5,3 +5,12 @@ piggy.lzo
piggy.lzma
vmlinux
vmlinux.lds
# borrowed libfdt files
fdt.c
fdt.h
fdt_ro.c
fdt_rw.c
fdt_wip.c
libfdt.h
libfdt_internal.h
......@@ -93,19 +93,36 @@ suffix_$(CONFIG_KERNEL_GZIP) = gzip
suffix_$(CONFIG_KERNEL_LZO) = lzo
suffix_$(CONFIG_KERNEL_LZMA) = lzma
# Borrowed libfdt files for the ATAG compatibility mode
libfdt := fdt_rw.c fdt_ro.c fdt_wip.c fdt.c
libfdt_hdrs := fdt.h libfdt.h libfdt_internal.h
libfdt_objs := $(addsuffix .o, $(basename $(libfdt)))
$(addprefix $(obj)/,$(libfdt) $(libfdt_hdrs)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/%
$(call cmd,shipped)
$(addprefix $(obj)/,$(libfdt_objs) atags_to_fdt.o): \
$(addprefix $(obj)/,$(libfdt_hdrs))
ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y)
OBJS += $(libfdt_objs) atags_to_fdt.o
endif
targets := vmlinux vmlinux.lds \
piggy.$(suffix_y) piggy.$(suffix_y).o \
font.o font.c head.o misc.o $(OBJS)
# Make sure files are removed during clean
extra-y += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S
extra-y += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S $(libfdt) $(libfdt_hdrs)
ifeq ($(CONFIG_FUNCTION_TRACER),y)
ORIG_CFLAGS := $(KBUILD_CFLAGS)
KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
endif
ccflags-y := -fpic -fno-builtin
ccflags-y := -fpic -fno-builtin -I$(obj)
asflags-y := -Wa,-march=all
# Supply kernel BSS size to the decompressor via a linker symbol.
......
#include <asm/setup.h>
#include <libfdt.h>
static int node_offset(void *fdt, const char *node_path)
{
int offset = fdt_path_offset(fdt, node_path);
if (offset == -FDT_ERR_NOTFOUND)
offset = fdt_add_subnode(fdt, 0, node_path);
return offset;
}
static int setprop(void *fdt, const char *node_path, const char *property,
uint32_t *val_array, int size)
{
int offset = node_offset(fdt, node_path);
if (offset < 0)
return offset;
return fdt_setprop(fdt, offset, property, val_array, size);
}
static int setprop_string(void *fdt, const char *node_path,
const char *property, const char *string)
{
int offset = node_offset(fdt, node_path);
if (offset < 0)
return offset;
return fdt_setprop_string(fdt, offset, property, string);
}
static int setprop_cell(void *fdt, const char *node_path,
const char *property, uint32_t val)
{
int offset = node_offset(fdt, node_path);
if (offset < 0)
return offset;
return fdt_setprop_cell(fdt, offset, property, val);
}
/*
* Convert and fold provided ATAGs into the provided FDT.
*
* REturn values:
* = 0 -> pretend success
* = 1 -> bad ATAG (may retry with another possible ATAG pointer)
* < 0 -> error from libfdt
*/
int atags_to_fdt(void *atag_list, void *fdt, int total_space)
{
struct tag *atag = atag_list;
uint32_t mem_reg_property[2 * NR_BANKS];
int memcount = 0;
int ret;
/* make sure we've got an aligned pointer */
if ((u32)atag_list & 0x3)
return 1;
/* if we get a DTB here we're done already */
if (*(u32 *)atag_list == fdt32_to_cpu(FDT_MAGIC))
return 0;
/* validate the ATAG */
if (atag->hdr.tag != ATAG_CORE ||
(atag->hdr.size != tag_size(tag_core) &&
atag->hdr.size != 2))
return 1;
/* let's give it all the room it could need */
ret = fdt_open_into(fdt, fdt, total_space);
if (ret < 0)
return ret;
for_each_tag(atag, atag_list) {
if (atag->hdr.tag == ATAG_CMDLINE) {
setprop_string(fdt, "/chosen", "bootargs",
atag->u.cmdline.cmdline);
} else if (atag->hdr.tag == ATAG_MEM) {
if (memcount >= sizeof(mem_reg_property)/4)
continue;
mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start);
mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size);
} else if (atag->hdr.tag == ATAG_INITRD2) {
uint32_t initrd_start, initrd_size;
initrd_start = atag->u.initrd.start;
initrd_size = atag->u.initrd.size;
setprop_cell(fdt, "/chosen", "linux,initrd-start",
initrd_start);
setprop_cell(fdt, "/chosen", "linux,initrd-end",
initrd_start + initrd_size);
}
}
if (memcount)
setprop(fdt, "/memory", "reg", mem_reg_property, 4*memcount);
return fdt_pack(fdt);
}
......@@ -246,6 +246,38 @@ restart: adr r0, LC0
cmp lr, r1
bne dtb_check_done @ not found
#ifdef CONFIG_ARM_ATAG_DTB_COMPAT
/*
* OK... Let's do some funky business here.
* If we do have a DTB appended to zImage, and we do have
* an ATAG list around, we want the later to be translated
* and folded into the former here. To be on the safe side,
* let's temporarily move the stack away into the malloc
* area. No GOT fixup has occurred yet, but none of the
* code we're about to call uses any global variable.
*/
add sp, sp, #0x10000
stmfd sp!, {r0-r3, ip, lr}
mov r0, r8
mov r1, r6
sub r2, sp, r6
bl atags_to_fdt
/*
* If returned value is 1, there is no ATAG at the location
* pointed by r8. Try the typical 0x100 offset from start
* of RAM and hope for the best.
*/
cmp r0, #1
sub r0, r4, #(TEXT_OFFSET - 0x100)
mov r1, r6
sub r2, sp, r6
blne atags_to_fdt
ldmfd sp!, {r0-r3, ip, lr}
sub sp, sp, #0x10000
#endif
mov r8, r6 @ use the appended device tree
/*
......
#ifndef _ARM_LIBFDT_ENV_H
#define _ARM_LIBFDT_ENV_H
#include <linux/types.h>
#include <linux/string.h>
#include <asm/byteorder.h>
#define fdt16_to_cpu(x) be16_to_cpu(x)
#define cpu_to_fdt16(x) cpu_to_be16(x)
#define fdt32_to_cpu(x) be32_to_cpu(x)
#define cpu_to_fdt32(x) cpu_to_be32(x)
#define fdt64_to_cpu(x) be64_to_cpu(x)
#define cpu_to_fdt64(x) cpu_to_be64(x)
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册