提交 b8ff87a6 编写于 作者: M Matt Fleming

x86/efi: Firmware agnostic handover entry points

The EFI handover code only works if the "bitness" of the firmware and
the kernel match, i.e. 64-bit firmware and 64-bit kernel - it is not
possible to mix the two. This goes against the tradition that a 32-bit
kernel can be loaded on a 64-bit BIOS platform without having to do
anything special in the boot loader. Linux distributions, for one thing,
regularly run only 32-bit kernels on their live media.

Despite having only one 'handover_offset' field in the kernel header,
EFI boot loaders use two separate entry points to enter the kernel based
on the architecture the boot loader was compiled for,

    (1) 32-bit loader: handover_offset
    (2) 64-bit loader: handover_offset + 512

Since we already have two entry points, we can leverage them to infer
the bitness of the firmware we're running on, without requiring any boot
loader modifications, by making (1) and (2) valid entry points for both
CONFIG_X86_32 and CONFIG_X86_64 kernels.

To be clear, a 32-bit boot loader will always use (1) and a 64-bit boot
loader will always use (2). It's just that, if a single kernel image
supports (1) and (2) that image can be used with both 32-bit and 64-bit
boot loaders, and hence both 32-bit and 64-bit EFI.

(1) and (2) must be 512 bytes apart at all times, but that is already
part of the boot ABI and we could never change that delta without
breaking existing boot loaders anyhow.
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
上级 c116e8d6
......@@ -80,7 +80,7 @@ targets += voffset.h
$(obj)/voffset.h: vmlinux FORCE
$(call if_changed,voffset)
sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|startup_64\|efi_pe_entry\|efi_stub_entry\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p'
sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|startup_64\|efi32_stub_entry\|efi64_stub_entry\|efi_pe_entry\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p'
quiet_cmd_zoffset = ZOFFSET $@
cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@
......
......@@ -1256,12 +1256,13 @@ static efi_status_t alloc_e820ext(u32 nr_desc, struct setup_data **e820ext,
}
static efi_status_t exit_boot(struct boot_params *boot_params,
void *handle)
void *handle, bool is64)
{
struct efi_info *efi = &boot_params->efi_info;
unsigned long map_sz, key, desc_size;
efi_memory_desc_t *mem_map;
struct setup_data *e820ext;
const char *signature;
__u32 e820ext_size;
__u32 nr_desc, prev_nr_desc;
efi_status_t status;
......@@ -1295,7 +1296,9 @@ static efi_status_t exit_boot(struct boot_params *boot_params,
goto get_map; /* Allocated memory, get map again */
}
memcpy(&efi->efi_loader_signature, EFI_LOADER_SIGNATURE, sizeof(__u32));
signature = is64 ? EFI64_LOADER_SIGNATURE : EFI32_LOADER_SIGNATURE;
memcpy(&efi->efi_loader_signature, signature, sizeof(__u32));
efi->efi_systab = (unsigned long)sys_table;
efi->efi_memdesc_size = desc_size;
efi->efi_memdesc_version = desc_version;
......@@ -1408,7 +1411,7 @@ struct boot_params *efi_main(struct efi_config *c,
hdr->code32_start = bzimage_addr;
}
status = exit_boot(boot_params, handle);
status = exit_boot(boot_params, handle, is64);
if (status != EFI_SUCCESS)
goto fail;
......
......@@ -64,7 +64,7 @@ ENTRY(efi_pe_entry)
pushl %ecx
jmp 2f /* Skip efi_config initialization */
ENTRY(efi_stub_entry)
ENTRY(efi32_stub_entry)
add $0x4, %esp
popl %ecx
popl %edx
......
......@@ -178,6 +178,13 @@ ENTRY(startup_32)
*/
pushl $__KERNEL_CS
leal startup_64(%ebp), %eax
#ifdef CONFIG_EFI_MIXED
movl efi32_config(%ebp), %ebx
cmp $0, %ebx
jz 1f
leal handover_entry(%ebp), %eax
1:
#endif
pushl %eax
/* Enter paged protected Mode, activating Long Mode */
......@@ -188,6 +195,30 @@ ENTRY(startup_32)
lret
ENDPROC(startup_32)
#ifdef CONFIG_EFI_MIXED
.org 0x190
ENTRY(efi32_stub_entry)
add $0x4, %esp /* Discard return address */
popl %ecx
popl %edx
popl %esi
leal (BP_scratch+4)(%esi), %esp
call 1f
1: pop %ebp
subl $1b, %ebp
movl %ecx, efi32_config(%ebp)
movl %edx, efi32_config+8(%ebp)
sgdtl efi32_boot_gdt(%ebp)
leal efi32_config(%ebp), %eax
movl %eax, efi_config(%ebp)
jmp startup_32
ENDPROC(efi32_stub_entry)
#endif
.code64
.org 0x200
ENTRY(startup_64)
......@@ -231,13 +262,7 @@ ENTRY(efi_pe_entry)
mov %rax, %rsi
jmp 2f /* Skip the relocation */
ENTRY(efi_stub_entry)
movq %rdi, efi64_config(%rip) /* Handle */
movq %rsi, efi64_config+8(%rip) /* EFI System table pointer */
leaq efi64_config(%rip), %rax
movq %rax, efi_config(%rip)
handover_entry:
call 1f
1: popq %rbp
subq $1b, %rbp
......@@ -247,7 +272,6 @@ ENTRY(efi_stub_entry)
*/
movq efi_config(%rip), %rax
addq %rbp, 88(%rax)
movq %rdx, %rsi
2:
movq efi_config(%rip), %rdi
call efi_main
......@@ -336,6 +360,20 @@ preferred_addr:
leaq relocated(%rbx), %rax
jmp *%rax
#ifdef CONFIG_EFI_STUB
.org 0x390
ENTRY(efi64_stub_entry)
movq %rdi, efi64_config(%rip) /* Handle */
movq %rsi, efi64_config+8(%rip) /* EFI System table pointer */
leaq efi64_config(%rip), %rax
movq %rax, efi_config(%rip)
movq %rdx, %rsi
jmp handover_entry
ENDPROC(efi64_stub_entry)
#endif
.text
relocated:
......@@ -404,6 +442,14 @@ gdt_end:
efi_config:
.quad 0
#ifdef CONFIG_EFI_MIXED
.global efi32_config
efi32_config:
.fill 11,8,0
.quad efi64_thunk
.byte 0
#endif
.global efi64_config
efi64_config:
.fill 11,8,0
......
......@@ -53,7 +53,8 @@ int is_big_kernel;
#define PECOFF_RELOC_RESERVE 0x20
unsigned long efi_stub_entry;
unsigned long efi32_stub_entry;
unsigned long efi64_stub_entry;
unsigned long efi_pe_entry;
unsigned long startup_64;
......@@ -231,20 +232,26 @@ static void efi_stub_defaults(void)
/* Defaults for old kernel */
#ifdef CONFIG_X86_32
efi_pe_entry = 0x10;
efi_stub_entry = 0x30;
#else
efi_pe_entry = 0x210;
efi_stub_entry = 0x230;
startup_64 = 0x200;
#endif
}
static void efi_stub_entry_update(void)
{
#ifdef CONFIG_X86_64 /* Yes, this is really how we defined it :( */
efi_stub_entry -= 0x200;
unsigned long addr = efi32_stub_entry;
#ifdef CONFIG_X86_64
/* Yes, this is really how we defined it :( */
addr = efi64_stub_entry - 0x200;
#endif
#ifdef CONFIG_EFI_MIXED
if (efi32_stub_entry != addr)
die("32-bit and 64-bit EFI entry points do not match\n");
#endif
put_unaligned_le32(efi_stub_entry, &buf[0x264]);
put_unaligned_le32(addr, &buf[0x264]);
}
#else
......@@ -289,7 +296,8 @@ static void parse_zoffset(char *fname)
p = (char *)buf;
while (p && *p) {
PARSE_ZOFS(p, efi_stub_entry);
PARSE_ZOFS(p, efi32_stub_entry);
PARSE_ZOFS(p, efi64_stub_entry);
PARSE_ZOFS(p, efi_pe_entry);
PARSE_ZOFS(p, startup_64);
......
......@@ -19,9 +19,11 @@
*/
#define EFI_OLD_MEMMAP EFI_ARCH_1
#define EFI32_LOADER_SIGNATURE "EL32"
#define EFI64_LOADER_SIGNATURE "EL64"
#ifdef CONFIG_X86_32
#define EFI_LOADER_SIGNATURE "EL32"
extern unsigned long asmlinkage efi_call_phys(void *, ...);
......@@ -57,8 +59,6 @@ extern unsigned long asmlinkage efi_call_phys(void *, ...);
#else /* !CONFIG_X86_32 */
#define EFI_LOADER_SIGNATURE "EL64"
extern u64 efi_call0(void *fp);
extern u64 efi_call1(void *fp, u64 arg1);
extern u64 efi_call2(void *fp, u64 arg1, u64 arg2);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册