提交 b7867394 编写于 作者: O Olivier Galibert 提交者: Andi Kleen

[PATCH] mmconfig: Share parts of mmconfig code between i386 and x86-64

i386 and x86-64 pci mmconfig code have a lot in common.  So share what's
shareable between the two.
Signed-off-by: NOlivier Galibert <galibert@pobox.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
上级 2e188938
obj-y := i386.o init.o
obj-$(CONFIG_PCI_BIOS) += pcbios.o
obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o
obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o mmconfig-shared.o
obj-$(CONFIG_PCI_DIRECT) += direct.o
pci-y := fixup.o
......
/*
* mmconfig-shared.c - Low-level direct PCI config space access via
* MMCONFIG - common code between i386 and x86-64.
*
* This code does:
* - ACPI decoding and validation
*
* Per-architecture code takes care of the mappings and accesses
* themselves.
*/
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/bitmap.h>
#include <asm/e820.h>
#include "pci.h"
/* aperture is up to 256MB but BIOS may reserve less */
#define MMCONFIG_APER_MIN (2 * 1024*1024)
#define MMCONFIG_APER_MAX (256 * 1024*1024)
/* Verify the first 16 busses. We assume that systems with more busses
get MCFG right. */
#define PCI_MMCFG_MAX_CHECK_BUS 16
DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS);
/* K8 systems have some devices (typically in the builtin northbridge)
that are only accessible using type1
Normally this can be expressed in the MCFG by not listing them
and assigning suitable _SEGs, but this isn't implemented in some BIOS.
Instead try to discover all devices on bus 0 that are unreachable using MM
and fallback for them. */
static __init void unreachable_devices(void)
{
int i, k;
/* Use the max bus number from ACPI here? */
for (k = 0; k < PCI_MMCFG_MAX_CHECK_BUS; k++) {
for (i = 0; i < 32; i++) {
u32 val1, val2;
pci_conf1_read(0, k, PCI_DEVFN(i,0), 0, 4, &val1);
if (val1 == 0xffffffff)
continue;
raw_pci_ops->read(0, k, PCI_DEVFN(i, 0), 0, 4, &val2);
if (val1 != val2) {
set_bit(i + 32*k, pci_mmcfg_fallback_slots);
printk(KERN_NOTICE "PCI: No mmconfig possible"
" on device %02x:%02x\n", k, i);
}
}
}
}
void __init pci_mmcfg_init(int type)
{
if ((pci_probe & PCI_PROBE_MMCONF) == 0)
return;
acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
if ((pci_mmcfg_config_num == 0) ||
(pci_mmcfg_config == NULL) ||
(pci_mmcfg_config[0].address == 0))
return;
/* Only do this check when type 1 works. If it doesn't work
assume we run on a Mac and always use MCFG */
if (type == 1 &&
!e820_all_mapped(pci_mmcfg_config[0].address,
pci_mmcfg_config[0].address + MMCONFIG_APER_MIN,
E820_RESERVED)) {
printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not E820-reserved\n",
pci_mmcfg_config[0].address);
printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
return;
}
if (pci_mmcfg_arch_init()) {
unreachable_devices();
pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
}
}
......@@ -15,21 +15,13 @@
#include <asm/e820.h>
#include "pci.h"
/* aperture is up to 256MB but BIOS may reserve less */
#define MMCONFIG_APER_MIN (2 * 1024*1024)
#define MMCONFIG_APER_MAX (256 * 1024*1024)
/* Assume systems with more busses have correct MCFG */
#define MAX_CHECK_BUS 16
#define mmcfg_virt_addr ((void __iomem *) fix_to_virt(FIX_PCIE_MCFG))
/* The base address of the last MMCONFIG device accessed */
static u32 mmcfg_last_accessed_device;
static int mmcfg_last_accessed_cpu;
static DECLARE_BITMAP(fallback_slots, MAX_CHECK_BUS*32);
/*
* Functions for accessing PCI configuration space with MMCONFIG accesses
*/
......@@ -38,8 +30,8 @@ static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn)
int cfg_num = -1;
struct acpi_mcfg_allocation *cfg;
if (seg == 0 && bus < MAX_CHECK_BUS &&
test_bit(PCI_SLOT(devfn) + 32*bus, fallback_slots))
if (seg == 0 && bus < PCI_MMCFG_MAX_CHECK_BUS &&
test_bit(PCI_SLOT(devfn) + 32*bus, pci_mmcfg_fallback_slots))
return 0;
while (1) {
......@@ -158,67 +150,9 @@ static struct pci_raw_ops pci_mmcfg = {
.write = pci_mmcfg_write,
};
/* K8 systems have some devices (typically in the builtin northbridge)
that are only accessible using type1
Normally this can be expressed in the MCFG by not listing them
and assigning suitable _SEGs, but this isn't implemented in some BIOS.
Instead try to discover all devices on bus 0 that are unreachable using MM
and fallback for them. */
static __init void unreachable_devices(void)
int __init pci_mmcfg_arch_init(void)
{
int i, k;
unsigned long flags;
for (k = 0; k < MAX_CHECK_BUS; k++) {
for (i = 0; i < 32; i++) {
u32 val1;
u32 addr;
pci_conf1_read(0, k, PCI_DEVFN(i, 0), 0, 4, &val1);
if (val1 == 0xffffffff)
continue;
/* Locking probably not needed, but safer */
spin_lock_irqsave(&pci_config_lock, flags);
addr = get_base_addr(0, k, PCI_DEVFN(i, 0));
if (addr != 0)
pci_exp_set_dev_base(addr, k, PCI_DEVFN(i, 0));
if (addr == 0 ||
readl((u32 __iomem *)mmcfg_virt_addr) != val1) {
set_bit(i + 32*k, fallback_slots);
printk(KERN_NOTICE
"PCI: No mmconfig possible on %x:%x\n", k, i);
}
spin_unlock_irqrestore(&pci_config_lock, flags);
}
}
}
void __init pci_mmcfg_init(int type)
{
if ((pci_probe & PCI_PROBE_MMCONF) == 0)
return;
acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
if ((pci_mmcfg_config_num == 0) ||
(pci_mmcfg_config == NULL) ||
(pci_mmcfg_config[0].address == 0))
return;
/* Only do this check when type 1 works. If it doesn't work
assume we run on a Mac and always use MCFG */
if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].address,
pci_mmcfg_config[0].address + MMCONFIG_APER_MIN,
E820_RESERVED)) {
printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %lx is not E820-reserved\n",
(unsigned long)pci_mmcfg_config[0].address);
printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
return;
}
printk(KERN_INFO "PCI: Using MMCONFIG\n");
raw_pci_ops = &pci_mmcfg;
pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
unreachable_devices();
return 1;
}
......@@ -94,3 +94,9 @@ extern void pci_pcbios_init(void);
extern void pci_mmcfg_init(int type);
extern void pcibios_sort(void);
/* pci-mmconfig.c */
#define PCI_MMCFG_MAX_CHECK_BUS 16
extern DECLARE_BITMAP(pci_mmcfg_fallback_slots, 32*PCI_MMCFG_MAX_CHECK_BUS);
extern int pci_mmcfg_arch_init(void);
......@@ -11,7 +11,7 @@ obj-y += fixup.o init.o
obj-$(CONFIG_ACPI) += acpi.o
obj-y += legacy.o irq.o common.o early.o
# mmconfig has a 64bit special
obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o
obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o direct.o mmconfig-shared.o
obj-$(CONFIG_NUMA) += k8-bus.o
......@@ -24,3 +24,4 @@ fixup-y += ../../i386/pci/fixup.o
i386-y += ../../i386/pci/i386.o
init-y += ../../i386/pci/init.o
early-y += ../../i386/pci/early.o
mmconfig-shared-y += ../../i386/pci/mmconfig-shared.o
......@@ -19,9 +19,7 @@
/* Verify the first 16 busses. We assume that systems with more busses
get MCFG right. */
#define MAX_CHECK_BUS 16
static DECLARE_BITMAP(fallback_slots, 32*MAX_CHECK_BUS);
#define PCI_MMCFG_MAX_CHECK_BUS 16
/* Static virtual mapping of the MMCONFIG aperture */
struct mmcfg_virt {
......@@ -63,8 +61,8 @@ static char __iomem *get_virt(unsigned int seg, unsigned bus)
static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn)
{
char __iomem *addr;
if (seg == 0 && bus < MAX_CHECK_BUS &&
test_bit(32*bus + PCI_SLOT(devfn), fallback_slots))
if (seg == 0 && bus < PCI_MMCFG_MAX_CHECK_BUS &&
test_bit(32*bus + PCI_SLOT(devfn), pci_mmcfg_fallback_slots))
return NULL;
addr = get_virt(seg, bus);
if (!addr)
......@@ -135,63 +133,16 @@ static struct pci_raw_ops pci_mmcfg = {
.write = pci_mmcfg_write,
};
/* K8 systems have some devices (typically in the builtin northbridge)
that are only accessible using type1
Normally this can be expressed in the MCFG by not listing them
and assigning suitable _SEGs, but this isn't implemented in some BIOS.
Instead try to discover all devices on bus 0 that are unreachable using MM
and fallback for them. */
static __init void unreachable_devices(void)
{
int i, k;
/* Use the max bus number from ACPI here? */
for (k = 0; k < MAX_CHECK_BUS; k++) {
for (i = 0; i < 32; i++) {
u32 val1;
char __iomem *addr;
pci_conf1_read(0, k, PCI_DEVFN(i,0), 0, 4, &val1);
if (val1 == 0xffffffff)
continue;
addr = pci_dev_base(0, k, PCI_DEVFN(i, 0));
if (addr == NULL|| readl(addr) != val1) {
set_bit(i + 32*k, fallback_slots);
printk(KERN_NOTICE "PCI: No mmconfig possible"
" on device %02x:%02x\n", k, i);
}
}
}
}
void __init pci_mmcfg_init(int type)
int __init pci_mmcfg_arch_init(void)
{
int i;
if ((pci_probe & PCI_PROBE_MMCONF) == 0)
return;
acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
if ((pci_mmcfg_config_num == 0) ||
(pci_mmcfg_config == NULL) ||
(pci_mmcfg_config[0].address == 0))
return;
/* Only do this check when type 1 works. If it doesn't work
assume we run on a Mac and always use MCFG */
if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].address,
pci_mmcfg_config[0].address + MMCONFIG_APER_MIN,
E820_RESERVED)) {
printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %lx is not E820-reserved\n",
(unsigned long)pci_mmcfg_config[0].address);
printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
return;
}
pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL);
pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) *
pci_mmcfg_config_num, GFP_KERNEL);
if (pci_mmcfg_virt == NULL) {
printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n");
return;
return 0;
}
for (i = 0; i < pci_mmcfg_config_num; ++i) {
pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i];
pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].address,
......@@ -200,14 +151,11 @@ void __init pci_mmcfg_init(int type)
printk(KERN_ERR "PCI: Cannot map mmconfig aperture for "
"segment %d\n",
pci_mmcfg_config[i].pci_segment);
return;
return 0;
}
printk(KERN_INFO "PCI: Using MMCONFIG at %lx\n",
(unsigned long)pci_mmcfg_config[i].address);
printk(KERN_INFO "PCI: Using MMCONFIG at %Lx\n",
pci_mmcfg_config[i].address);
}
unreachable_devices();
raw_pci_ops = &pci_mmcfg;
pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
return 1;
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册