提交 b6f6436d 编写于 作者: A Alan Stern 提交者: Greg Kroah-Hartman

USB: move bus_suspend and bus_resume method calls

This patch (as885) moves the root-hub bus_suspend() and bus_resume()
method calls from the hub driver's suspend and resume methods into the
usb_generic driver methods, where they make just as much sense.

Their old locations were not fully correct.  For example, in a kernel
compiled without CONFIG_USB_SUSPEND, if one were to do:

	echo -n 1-0:1.0 >/sys/bus/usb/drivers/hub/unbind

to unbind the hub driver from a root hub, there would then be no way
to suspend that root hub.  Attempts to put the system to sleep would
fail; the USB controller driver would refuse to suspend because the
root hub was still active.

The patch also makes a very slight change in the way devices with no
driver are handled during suspend.  Rather than doing a standard USB
port-suspend directly, now the suspend routine in usb_generic is
called.  In practice this should never affect anyone.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 4d461095
......@@ -802,14 +802,13 @@ static int usb_suspend_device(struct usb_device *udev, pm_message_t msg)
udev->state == USB_STATE_SUSPENDED)
goto done;
/* For devices that don't have a driver, we do a standard suspend. */
if (udev->dev.driver == NULL) {
/* For devices that don't have a driver, we do a generic suspend. */
if (udev->dev.driver)
udriver = to_usb_device_driver(udev->dev.driver);
else {
udev->do_remote_wakeup = 0;
status = usb_port_suspend(udev);
goto done;
udriver = &usb_generic_driver;
}
udriver = to_usb_device_driver(udev->dev.driver);
status = udriver->suspend(udev, msg);
done:
......
......@@ -19,6 +19,7 @@
#include <linux/usb.h>
#include "usb.h"
#include "hcd.h"
static inline const char *plural(int n)
{
......@@ -193,12 +194,46 @@ static void generic_disconnect(struct usb_device *udev)
static int generic_suspend(struct usb_device *udev, pm_message_t msg)
{
return usb_port_suspend(udev);
int rc;
rc = usb_port_suspend(udev);
/* Root hubs don't have upstream ports to suspend,
* so the line above won't do much for them. We have to
* shut down their downstream HC-to-USB interfaces manually,
* by doing a bus (or "global") suspend.
*/
if (rc == 0 && !udev->parent) {
rc = hcd_bus_suspend(udev->bus);
if (rc) {
dev_dbg(&udev->dev, "'global' suspend %d\n", rc);
usb_port_resume(udev);
}
}
return rc;
}
static int generic_resume(struct usb_device *udev)
{
return usb_port_resume(udev);
int rc;
rc = usb_port_resume(udev);
/* Root hubs don't have upstream ports to resume or reset,
* so the line above won't do much for them. We have to
* start up their downstream HC-to-USB interfaces manually,
* by doing a bus (or "global") resume.
*/
if (rc == 0 && !udev->parent) {
rc = hcd_bus_resume(udev->bus);
if (rc)
dev_dbg(&udev->dev, "'global' resume %d\n", rc);
else {
/* TRSMRCY = 10 msec */
msleep(10);
}
}
return rc;
}
#endif /* CONFIG_PM */
......
......@@ -1916,7 +1916,6 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
struct usb_hub *hub = usb_get_intfdata (intf);
struct usb_device *hdev = hub->hdev;
unsigned port1;
int status = 0;
/* fail if children aren't already suspended */
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
......@@ -1942,44 +1941,15 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
/* stop khubd and related activity */
hub_quiesce(hub);
/* "global suspend" of the downstream HC-to-USB interface */
if (!hdev->parent) {
status = hcd_bus_suspend(hdev->bus);
if (status != 0) {
dev_dbg(&hdev->dev, "'global' suspend %d\n", status);
hub_activate(hub);
}
}
return status;
return 0;
}
static int hub_resume(struct usb_interface *intf)
{
struct usb_hub *hub = usb_get_intfdata (intf);
struct usb_device *hdev = hub->hdev;
int status;
dev_dbg(&intf->dev, "%s\n", __FUNCTION__);
/* "global resume" of the downstream HC-to-USB interface */
if (!hdev->parent) {
struct usb_bus *bus = hdev->bus;
if (bus) {
status = hcd_bus_resume (bus);
if (status) {
dev_dbg(&intf->dev, "'global' resume %d\n",
status);
return status;
}
} else
return -EOPNOTSUPP;
if (status == 0) {
/* TRSMRCY = 10 msec */
msleep(10);
}
}
/* tell khubd to look for changes on this hub */
hub_activate(hub);
return 0;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册