ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file

mmc1 only has 1 possible pinmux setting.

Move any settings to the dtsi file and set it by default.
Signed-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts

@@ -115,8 +115,6 @@ &mmc0 {
 &mmc1 {
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	vqmmc-supply = <&reg_vcc3v3>;
 	non-removable;

arch/arm/boot/dts/sun8i-a83t.dtsi

@@ -212,6 +212,8 @@ mmc1: mmc@1c10000 {
 			resets = <&ccu RST_BUS_MMC1>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;