mmc: block: skip trim for some kingston eMMCs

For some mass production of kingston eMMCs which adopt Phison's
firmware will meet an unrecoverable data conrruption occasionally
if performing trim due to a firmware bug confirmed by vendor. We
found it on Intel-C3230RK platform. So we add fixup of broken trim
for it.
Signed-off-by: NShawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

drivers/mmc/card/block.c

@@ -2389,6 +2389,7 @@ static int mmc_add_disk(struct mmc_blk_data *md)
 #define CID_MANFID_TOSHIBA	0x11
 #define CID_MANFID_MICRON	0x13
 #define CID_MANFID_SAMSUNG	0x15
+#define CID_MANFID_KINGSTON	0x70
 
 static const struct mmc_fixup blk_fixups[] =
 {
@@ -2451,6 +2452,15 @@ static const struct mmc_fixup blk_fixups[] =
 	MMC_FIXUP("VZL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
 		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
 
+	/*
+	 *  On Some Kingston eMMCs, performing trim can result in
+	 *  unrecoverable data conrruption occasionally due to a firmware bug.
+	 */
+	MMC_FIXUP("V10008", CID_MANFID_KINGSTON, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_TRIM_BROKEN),
+	MMC_FIXUP("V10016", CID_MANFID_KINGSTON, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_TRIM_BROKEN),
+
 	END_FIXUP
 };
 

drivers/mmc/core/core.c

@@ -2250,7 +2250,8 @@ EXPORT_SYMBOL(mmc_can_erase);
 
 int mmc_can_trim(struct mmc_card *card)
 {
-	if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN)
+	if ((card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN) &&
+	    (!(card->quirks & MMC_QUIRK_TRIM_BROKEN)))
 		return 1;
 	return 0;
 }

include/linux/mmc/card.h

@@ -279,6 +279,8 @@ struct mmc_card {
 #define MMC_QUIRK_LONG_READ_TIME (1<<9)		/* Data read time > CSD says */
 #define MMC_QUIRK_SEC_ERASE_TRIM_BROKEN (1<<10)	/* Skip secure for erase/trim */
 #define MMC_QUIRK_BROKEN_IRQ_POLLING	(1<<11)	/* Polling SDIO_CCCR_INTx could create a fake interrupt */
+#define MMC_QUIRK_TRIM_BROKEN	(1<<12)		/* Skip trim */
+
 
 	unsigned int		erase_size;	/* erase size in sectors */
  	unsigned int		erase_shift;	/* if erase unit is power 2 */