提交 b56045d4 编写于 作者: L Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
  regulator: max8997: Fix setting inappropriate value for ramp_delay variable
  regulator: db8500-prcmu: small fixes
  regulator: max8997: remove dependency on platform_data pointer
  regulator: MAX8997: Fix for divide by zero error
  regulator: max8952 - fix wrong gpio valid check
......@@ -266,7 +266,7 @@ static struct regulator_ops db8500_regulator_switch_ops = {
* Regulator information
*/
static struct db8500_regulator_info
db8500_regulator_info[DB8500_NUM_REGULATORS] = {
db8500_regulator_info[DB8500_NUM_REGULATORS] = {
[DB8500_REGULATOR_VAPE] = {
.desc = {
.name = "db8500-vape",
......@@ -492,11 +492,9 @@ static int __devinit db8500_regulator_probe(struct platform_device *pdev)
info->desc.name, err);
/* if failing, unregister all earlier regulators */
i--;
while (i >= 0) {
while (--i >= 0) {
info = &db8500_regulator_info[i];
regulator_unregister(info->rdev);
i--;
}
return err;
}
......@@ -536,13 +534,7 @@ static struct platform_driver db8500_regulator_driver = {
static int __init db8500_regulator_init(void)
{
int ret;
ret = platform_driver_register(&db8500_regulator_driver);
if (ret < 0)
return -ENODEV;
return 0;
return platform_driver_register(&db8500_regulator_driver);
}
static void __exit db8500_regulator_exit(void)
......
......@@ -139,7 +139,7 @@ static int max8952_set_voltage(struct regulator_dev *rdev,
s8 vid = -1, i;
if (!gpio_is_valid(max8952->pdata->gpio_vid0) ||
!gpio_is_valid(max8952->pdata->gpio_vid0)) {
!gpio_is_valid(max8952->pdata->gpio_vid1)) {
/* DVS not supported */
return -EPERM;
}
......
......@@ -39,25 +39,28 @@ struct max8997_data {
struct regulator_dev **rdev;
int ramp_delay; /* in mV/us */
bool buck1_gpiodvs;
bool buck2_gpiodvs;
bool buck5_gpiodvs;
u8 buck1_vol[8];
u8 buck2_vol[8];
u8 buck5_vol[8];
int buck125_gpios[3];
int buck125_gpioindex;
bool ignore_gpiodvs_side_effect;
u8 saved_states[MAX8997_REG_MAX];
};
static inline void max8997_set_gpio(struct max8997_data *max8997)
{
struct max8997_platform_data *pdata =
dev_get_platdata(max8997->iodev->dev);
int set3 = (max8997->buck125_gpioindex) & 0x1;
int set2 = ((max8997->buck125_gpioindex) >> 1) & 0x1;
int set1 = ((max8997->buck125_gpioindex) >> 2) & 0x1;
gpio_set_value(pdata->buck125_gpios[0], set1);
gpio_set_value(pdata->buck125_gpios[1], set2);
gpio_set_value(pdata->buck125_gpios[2], set3);
gpio_set_value(max8997->buck125_gpios[0], set1);
gpio_set_value(max8997->buck125_gpios[1], set2);
gpio_set_value(max8997->buck125_gpios[2], set3);
}
struct voltage_map_desc {
......@@ -380,8 +383,6 @@ static int max8997_get_voltage_register(struct regulator_dev *rdev,
static int max8997_get_voltage(struct regulator_dev *rdev)
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
struct max8997_platform_data *pdata =
dev_get_platdata(max8997->iodev->dev);
struct i2c_client *i2c = max8997->iodev->i2c;
int reg, shift, mask, ret;
int rid = max8997_get_rid(rdev);
......@@ -391,9 +392,9 @@ static int max8997_get_voltage(struct regulator_dev *rdev)
if (ret)
return ret;
if ((rid == MAX8997_BUCK1 && pdata->buck1_gpiodvs) ||
(rid == MAX8997_BUCK2 && pdata->buck2_gpiodvs) ||
(rid == MAX8997_BUCK5 && pdata->buck5_gpiodvs))
if ((rid == MAX8997_BUCK1 && max8997->buck1_gpiodvs) ||
(rid == MAX8997_BUCK2 && max8997->buck2_gpiodvs) ||
(rid == MAX8997_BUCK5 && max8997->buck5_gpiodvs))
reg += max8997->buck125_gpioindex;
ret = max8997_read_reg(i2c, reg, &val);
......@@ -543,7 +544,8 @@ static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev,
rid == MAX8997_BUCK4 || rid == MAX8997_BUCK5) {
/* If the voltage is increasing */
if (org < i)
udelay(desc->step * (i - org) / max8997->ramp_delay);
udelay(DIV_ROUND_UP(desc->step * (i - org),
max8997->ramp_delay));
}
return ret;
......@@ -561,8 +563,6 @@ static int max8997_assess_side_effect(struct regulator_dev *rdev,
u8 new_val, int *best)
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
struct max8997_platform_data *pdata =
dev_get_platdata(max8997->iodev->dev);
int rid = max8997_get_rid(rdev);
u8 *buckx_val[3];
bool buckx_gpiodvs[3];
......@@ -589,9 +589,9 @@ static int max8997_assess_side_effect(struct regulator_dev *rdev,
buckx_val[0] = max8997->buck1_vol;
buckx_val[1] = max8997->buck2_vol;
buckx_val[2] = max8997->buck5_vol;
buckx_gpiodvs[0] = pdata->buck1_gpiodvs;
buckx_gpiodvs[1] = pdata->buck2_gpiodvs;
buckx_gpiodvs[2] = pdata->buck5_gpiodvs;
buckx_gpiodvs[0] = max8997->buck1_gpiodvs;
buckx_gpiodvs[1] = max8997->buck2_gpiodvs;
buckx_gpiodvs[2] = max8997->buck5_gpiodvs;
for (i = 0; i < 8; i++) {
int others;
......@@ -640,8 +640,6 @@ static int max8997_set_voltage_buck(struct regulator_dev *rdev,
int min_uV, int max_uV, unsigned *selector)
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
struct max8997_platform_data *pdata =
dev_get_platdata(max8997->iodev->dev);
int rid = max8997_get_rid(rdev);
const struct voltage_map_desc *desc;
int new_val, new_idx, damage, tmp_val, tmp_idx, tmp_dmg;
......@@ -653,15 +651,15 @@ static int max8997_set_voltage_buck(struct regulator_dev *rdev,
switch (rid) {
case MAX8997_BUCK1:
if (pdata->buck1_gpiodvs)
if (max8997->buck1_gpiodvs)
gpio_dvs_mode = true;
break;
case MAX8997_BUCK2:
if (pdata->buck2_gpiodvs)
if (max8997->buck2_gpiodvs)
gpio_dvs_mode = true;
break;
case MAX8997_BUCK5:
if (pdata->buck5_gpiodvs)
if (max8997->buck5_gpiodvs)
gpio_dvs_mode = true;
break;
}
......@@ -695,7 +693,7 @@ static int max8997_set_voltage_buck(struct regulator_dev *rdev,
new_idx = tmp_idx;
new_val = tmp_val;
if (pdata->ignore_gpiodvs_side_effect == false)
if (max8997->ignore_gpiodvs_side_effect == false)
return -EINVAL;
dev_warn(&rdev->dev, "MAX8997 GPIO-DVS Side Effect Warning: GPIO SET:"
......@@ -993,6 +991,11 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
i2c = max8997->iodev->i2c;
max8997->buck125_gpioindex = pdata->buck125_default_idx;
max8997->buck1_gpiodvs = pdata->buck1_gpiodvs;
max8997->buck2_gpiodvs = pdata->buck2_gpiodvs;
max8997->buck5_gpiodvs = pdata->buck5_gpiodvs;
memcpy(max8997->buck125_gpios, pdata->buck125_gpios, sizeof(int) * 3);
max8997->ignore_gpiodvs_side_effect = pdata->ignore_gpiodvs_side_effect;
for (i = 0; i < 8; i++) {
max8997->buck1_vol[i] = ret =
......@@ -1124,6 +1127,10 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
0x3f);
}
/* Misc Settings */
max8997->ramp_delay = 10; /* set 10mV/us, which is the default */
max8997_write_reg(i2c, MAX8997_REG_BUCKRAMP, (0xf << 4) | 0x9);
for (i = 0; i < pdata->num_regulators; i++) {
const struct voltage_map_desc *desc;
int id = pdata->regulators[i].id;
......@@ -1148,10 +1155,6 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
}
}
/* Misc Settings */
max8997->ramp_delay = 10; /* set 10mV/us, which is the default */
max8997_write_reg(i2c, MAX8997_REG_BUCKRAMP, (0xf << 4) | 0x9);
return 0;
err:
for (i = 0; i < max8997->num_regulators; i++)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册