提交 b51f3bee 编写于 作者: J Johannes Berg

cfg80211: change bandwidth reporting to explicit field

For some reason, we made the bandwidth separate flags, which
is rather confusing - a single rate cannot have different
bandwidths at the same time.

Change this to no longer be flags but use a separate field
for the bandwidth ('bw') instead.

While at it, add support for 5 and 10 MHz rates - these are
reported as regular legacy rates with their real bitrate,
but tagged as 5/10 now to make it easier to distinguish them.

In the nl80211 API, the flags are preserved, but the code
now can also clearly only set a single one of the flags.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
上级 97d910d0
......@@ -1827,6 +1827,7 @@ static int ath6kl_get_station(struct wiphy *wiphy, struct net_device *dev,
}
sinfo->txrate.flags |= RATE_INFO_FLAGS_MCS;
sinfo->txrate.bw = RATE_INFO_BW_20;
} else if (is_rate_ht40(rate, &mcs, &sgi)) {
if (sgi) {
sinfo->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
......@@ -1835,7 +1836,7 @@ static int ath6kl_get_station(struct wiphy *wiphy, struct net_device *dev,
sinfo->txrate.mcs = mcs;
}
sinfo->txrate.flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
sinfo->txrate.bw = RATE_INFO_BW_40;
sinfo->txrate.flags |= RATE_INFO_FLAGS_MCS;
} else {
ath6kl_dbg(ATH6KL_DBG_WLAN_CFG,
......
......@@ -856,16 +856,16 @@ mwifiex_parse_htinfo(struct mwifiex_private *priv, u8 tx_htinfo,
/* HT or VHT */
switch (tx_htinfo & (BIT(3) | BIT(2))) {
case 0:
/* This will be 20MHz */
rate->bw = RATE_INFO_BW_20;
break;
case (BIT(2)):
rate->flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
rate->bw = RATE_INFO_BW_40;
break;
case (BIT(3)):
rate->flags |= RATE_INFO_FLAGS_80_MHZ_WIDTH;
rate->bw = RATE_INFO_BW_80;
break;
case (BIT(3) | BIT(2)):
rate->flags |= RATE_INFO_FLAGS_160_MHZ_WIDTH;
rate->bw = RATE_INFO_BW_160;
break;
}
......@@ -885,8 +885,9 @@ mwifiex_parse_htinfo(struct mwifiex_private *priv, u8 tx_htinfo,
if ((tx_htinfo & BIT(0)) && (priv->tx_rate < 16)) {
rate->mcs = priv->tx_rate;
rate->flags |= RATE_INFO_FLAGS_MCS;
rate->bw = RATE_INFO_BW_20;
if (tx_htinfo & BIT(1))
rate->flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
rate->bw = RATE_INFO_BW_40;
if (tx_htinfo & BIT(2))
rate->flags |= RATE_INFO_FLAGS_SHORT_GI;
}
......
......@@ -873,20 +873,35 @@ int cfg80211_check_station_change(struct wiphy *wiphy,
*
* @RATE_INFO_FLAGS_MCS: mcs field filled with HT MCS
* @RATE_INFO_FLAGS_VHT_MCS: mcs field filled with VHT MCS
* @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 MHz width transmission
* @RATE_INFO_FLAGS_80_MHZ_WIDTH: 80 MHz width transmission
* @RATE_INFO_FLAGS_160_MHZ_WIDTH: 160 MHz width transmission
* @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval
* @RATE_INFO_FLAGS_60G: 60GHz MCS
*/
enum rate_info_flags {
RATE_INFO_FLAGS_MCS = BIT(0),
RATE_INFO_FLAGS_VHT_MCS = BIT(1),
RATE_INFO_FLAGS_40_MHZ_WIDTH = BIT(2),
RATE_INFO_FLAGS_80_MHZ_WIDTH = BIT(3),
RATE_INFO_FLAGS_160_MHZ_WIDTH = BIT(4),
RATE_INFO_FLAGS_SHORT_GI = BIT(5),
RATE_INFO_FLAGS_60G = BIT(6),
RATE_INFO_FLAGS_SHORT_GI = BIT(2),
RATE_INFO_FLAGS_60G = BIT(3),
};
/**
* enum rate_info_bw - rate bandwidth information
*
* Used by the driver to indicate the rate bandwidth.
*
* @RATE_INFO_BW_5: 5 MHz bandwidth
* @RATE_INFO_BW_10: 10 MHz bandwidth
* @RATE_INFO_BW_20: 20 MHz bandwidth
* @RATE_INFO_BW_40: 40 MHz bandwidth
* @RATE_INFO_BW_80: 80 MHz bandwidth
* @RATE_INFO_BW_160: 160 MHz bandwidth
*/
enum rate_info_bw {
RATE_INFO_BW_5,
RATE_INFO_BW_10,
RATE_INFO_BW_20,
RATE_INFO_BW_40,
RATE_INFO_BW_80,
RATE_INFO_BW_160,
};
/**
......@@ -898,12 +913,14 @@ enum rate_info_flags {
* @mcs: mcs index if struct describes a 802.11n bitrate
* @legacy: bitrate in 100kbit/s for 802.11abg
* @nss: number of streams (VHT only)
* @bw: bandwidth (from &enum rate_info_bw)
*/
struct rate_info {
u8 flags;
u8 mcs;
u16 legacy;
u8 nss;
u8 bw;
};
/**
......
......@@ -2281,6 +2281,12 @@ struct nl80211_sta_flag_update {
* @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the
* same as 160 for purposes of the bitrates
* @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate
* @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is
* a legacy rate and will be reported as the actual bitrate, i.e.
* half the base (20 MHz) rate
* @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is
* a legacy rate and will be reported as the actual bitrate, i.e.
* a quarter of the base (20 MHz) rate
* @__NL80211_RATE_INFO_AFTER_LAST: internal use
*/
enum nl80211_rate_info {
......@@ -2295,6 +2301,8 @@ enum nl80211_rate_info {
NL80211_RATE_INFO_80_MHZ_WIDTH,
NL80211_RATE_INFO_80P80_MHZ_WIDTH,
NL80211_RATE_INFO_160_MHZ_WIDTH,
NL80211_RATE_INFO_10_MHZ_WIDTH,
NL80211_RATE_INFO_5_MHZ_WIDTH,
/* keep last */
__NL80211_RATE_INFO_AFTER_LAST,
......
......@@ -428,11 +428,13 @@ void sta_set_rate_info_tx(struct sta_info *sta,
rinfo->legacy = DIV_ROUND_UP(brate, 1 << shift);
}
if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
rinfo->flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
if (rate->flags & IEEE80211_TX_RC_80_MHZ_WIDTH)
rinfo->flags |= RATE_INFO_FLAGS_80_MHZ_WIDTH;
if (rate->flags & IEEE80211_TX_RC_160_MHZ_WIDTH)
rinfo->flags |= RATE_INFO_FLAGS_160_MHZ_WIDTH;
rinfo->bw = RATE_INFO_BW_40;
else if (rate->flags & IEEE80211_TX_RC_80_MHZ_WIDTH)
rinfo->bw = RATE_INFO_BW_80;
else if (rate->flags & IEEE80211_TX_RC_160_MHZ_WIDTH)
rinfo->bw = RATE_INFO_BW_160;
else
rinfo->bw = RATE_INFO_BW_20;
if (rate->flags & IEEE80211_TX_RC_SHORT_GI)
rinfo->flags |= RATE_INFO_FLAGS_SHORT_GI;
}
......@@ -459,14 +461,21 @@ void sta_set_rate_info_rx(struct sta_info *sta, struct rate_info *rinfo)
rinfo->legacy = DIV_ROUND_UP(brate, 1 << shift);
}
if (sta->last_rx_rate_flag & RX_FLAG_40MHZ)
rinfo->flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
if (sta->last_rx_rate_flag & RX_FLAG_SHORT_GI)
rinfo->flags |= RATE_INFO_FLAGS_SHORT_GI;
if (sta->last_rx_rate_vht_flag & RX_VHT_FLAG_80MHZ)
rinfo->flags |= RATE_INFO_FLAGS_80_MHZ_WIDTH;
if (sta->last_rx_rate_vht_flag & RX_VHT_FLAG_160MHZ)
rinfo->flags |= RATE_INFO_FLAGS_160_MHZ_WIDTH;
if (sta->last_rx_rate_flag & RX_FLAG_5MHZ)
rinfo->bw = RATE_INFO_BW_5;
else if (sta->last_rx_rate_flag & RX_FLAG_10MHZ)
rinfo->bw = RATE_INFO_BW_10;
else if (sta->last_rx_rate_flag & RX_FLAG_40MHZ)
rinfo->bw = RATE_INFO_BW_40;
else if (sta->last_rx_rate_vht_flag & RX_VHT_FLAG_80MHZ)
rinfo->bw = RATE_INFO_BW_80;
else if (sta->last_rx_rate_vht_flag & RX_VHT_FLAG_160MHZ)
rinfo->bw = RATE_INFO_BW_160;
else
rinfo->bw = RATE_INFO_BW_20;
}
static int ieee80211_dump_station(struct wiphy *wiphy, struct net_device *dev,
......
......@@ -2541,7 +2541,9 @@ u64 ieee80211_calculate_rx_timestamp(struct ieee80211_local *local,
ri.mcs = status->rate_idx;
ri.flags |= RATE_INFO_FLAGS_MCS;
if (status->flag & RX_FLAG_40MHZ)
ri.flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
ri.bw = RATE_INFO_BW_40;
else
ri.bw = RATE_INFO_BW_20;
if (status->flag & RX_FLAG_SHORT_GI)
ri.flags |= RATE_INFO_FLAGS_SHORT_GI;
} else if (status->flag & RX_FLAG_VHT) {
......@@ -2549,11 +2551,13 @@ u64 ieee80211_calculate_rx_timestamp(struct ieee80211_local *local,
ri.mcs = status->rate_idx;
ri.nss = status->vht_nss;
if (status->flag & RX_FLAG_40MHZ)
ri.flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
if (status->vht_flag & RX_VHT_FLAG_80MHZ)
ri.flags |= RATE_INFO_FLAGS_80_MHZ_WIDTH;
if (status->vht_flag & RX_VHT_FLAG_160MHZ)
ri.flags |= RATE_INFO_FLAGS_160_MHZ_WIDTH;
ri.bw = RATE_INFO_BW_40;
else if (status->vht_flag & RX_VHT_FLAG_80MHZ)
ri.bw = RATE_INFO_BW_80;
else if (status->vht_flag & RX_VHT_FLAG_160MHZ)
ri.bw = RATE_INFO_BW_160;
else
ri.bw = RATE_INFO_BW_20;
if (status->flag & RX_FLAG_SHORT_GI)
ri.flags |= RATE_INFO_FLAGS_SHORT_GI;
} else {
......@@ -2561,10 +2565,15 @@ u64 ieee80211_calculate_rx_timestamp(struct ieee80211_local *local,
int shift = 0;
int bitrate;
if (status->flag & RX_FLAG_10MHZ)
if (status->flag & RX_FLAG_10MHZ) {
shift = 1;
if (status->flag & RX_FLAG_5MHZ)
ri.bw = RATE_INFO_BW_10;
} else if (status->flag & RX_FLAG_5MHZ) {
shift = 2;
ri.bw = RATE_INFO_BW_5;
} else {
ri.bw = RATE_INFO_BW_20;
}
sband = local->hw.wiphy->bands[status->band];
bitrate = sband->bitrates[status->rate_idx].bitrate;
......
......@@ -3578,6 +3578,7 @@ static bool nl80211_put_sta_rate(struct sk_buff *msg, struct rate_info *info,
struct nlattr *rate;
u32 bitrate;
u16 bitrate_compat;
enum nl80211_attrs rate_flg;
rate = nla_nest_start(msg, attr);
if (!rate)
......@@ -3594,12 +3595,36 @@ static bool nl80211_put_sta_rate(struct sk_buff *msg, struct rate_info *info,
nla_put_u16(msg, NL80211_RATE_INFO_BITRATE, bitrate_compat))
return false;
switch (info->bw) {
case RATE_INFO_BW_5:
rate_flg = NL80211_RATE_INFO_5_MHZ_WIDTH;
break;
case RATE_INFO_BW_10:
rate_flg = NL80211_RATE_INFO_10_MHZ_WIDTH;
break;
default:
WARN_ON(1);
/* fall through */
case RATE_INFO_BW_20:
rate_flg = 0;
break;
case RATE_INFO_BW_40:
rate_flg = NL80211_RATE_INFO_40_MHZ_WIDTH;
break;
case RATE_INFO_BW_80:
rate_flg = NL80211_RATE_INFO_80_MHZ_WIDTH;
break;
case RATE_INFO_BW_160:
rate_flg = NL80211_RATE_INFO_160_MHZ_WIDTH;
break;
}
if (rate_flg && nla_put_flag(msg, rate_flg))
return false;
if (info->flags & RATE_INFO_FLAGS_MCS) {
if (nla_put_u8(msg, NL80211_RATE_INFO_MCS, info->mcs))
return false;
if (info->flags & RATE_INFO_FLAGS_40_MHZ_WIDTH &&
nla_put_flag(msg, NL80211_RATE_INFO_40_MHZ_WIDTH))
return false;
if (info->flags & RATE_INFO_FLAGS_SHORT_GI &&
nla_put_flag(msg, NL80211_RATE_INFO_SHORT_GI))
return false;
......@@ -3608,15 +3633,6 @@ static bool nl80211_put_sta_rate(struct sk_buff *msg, struct rate_info *info,
return false;
if (nla_put_u8(msg, NL80211_RATE_INFO_VHT_NSS, info->nss))
return false;
if (info->flags & RATE_INFO_FLAGS_40_MHZ_WIDTH &&
nla_put_flag(msg, NL80211_RATE_INFO_40_MHZ_WIDTH))
return false;
if (info->flags & RATE_INFO_FLAGS_80_MHZ_WIDTH &&
nla_put_flag(msg, NL80211_RATE_INFO_80_MHZ_WIDTH))
return false;
if (info->flags & RATE_INFO_FLAGS_160_MHZ_WIDTH &&
nla_put_flag(msg, NL80211_RATE_INFO_160_MHZ_WIDTH))
return false;
if (info->flags & RATE_INFO_FLAGS_SHORT_GI &&
nla_put_flag(msg, NL80211_RATE_INFO_SHORT_GI))
return false;
......
......@@ -1073,9 +1073,24 @@ static u32 cfg80211_calculate_bitrate_vht(struct rate_info *rate)
if (WARN_ON_ONCE(rate->mcs > 9))
return 0;
idx = rate->flags & RATE_INFO_FLAGS_160_MHZ_WIDTH ? 3 :
rate->flags & RATE_INFO_FLAGS_80_MHZ_WIDTH ? 2 :
rate->flags & RATE_INFO_FLAGS_40_MHZ_WIDTH ? 1 : 0;
switch (rate->bw) {
case RATE_INFO_BW_160:
idx = 3;
break;
case RATE_INFO_BW_80:
idx = 2;
break;
case RATE_INFO_BW_40:
idx = 1;
break;
case RATE_INFO_BW_5:
case RATE_INFO_BW_10:
default:
WARN_ON(1);
/* fall through */
case RATE_INFO_BW_20:
idx = 0;
}
bitrate = base[idx][rate->mcs];
bitrate *= rate->nss;
......@@ -1106,8 +1121,7 @@ u32 cfg80211_calculate_bitrate(struct rate_info *rate)
modulation = rate->mcs & 7;
streams = (rate->mcs >> 3) + 1;
bitrate = (rate->flags & RATE_INFO_FLAGS_40_MHZ_WIDTH) ?
13500000 : 6500000;
bitrate = (rate->bw == RATE_INFO_BW_40) ? 13500000 : 6500000;
if (modulation < 4)
bitrate *= (modulation + 1);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册