提交 b1b8fea9 编写于 作者: T Tomasz Figa 提交者: Chris Ball

mmc: host: sdhci-s3c: Use devm_gpio_request to request GPIOs

The set of GPIO pins used by sdhci-s3c driver varies between
configurations, such as card detect method, pinctrl availability, etc.
This overly complicates the code requesting and freeing GPIO pins, which
must check which pins are used, when freeing them.

This patch modifies the sdhci-s3c driver to use devm_gpio_request to
free requested pins automatically after unbinding the driver.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Acked-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NChris Ball <cjb@laptop.org>
上级 3cf38833
......@@ -413,7 +413,7 @@ static void sdhci_s3c_setup_card_detect_gpio(struct sdhci_s3c *sc)
struct s3c_sdhci_platdata *pdata = sc->pdata;
struct device *dev = &sc->pdev->dev;
if (gpio_request(pdata->ext_cd_gpio, "SDHCI EXT CD") == 0) {
if (devm_gpio_request(dev, pdata->ext_cd_gpio, "SDHCI EXT CD") == 0) {
sc->ext_cd_gpio = pdata->ext_cd_gpio;
sc->ext_cd_irq = gpio_to_irq(pdata->ext_cd_gpio);
if (sc->ext_cd_irq &&
......@@ -494,7 +494,7 @@ static int __devinit sdhci_s3c_parse_dt(struct device *dev,
if (of_get_property(node, "cd-inverted", NULL))
pdata->ext_cd_gpio_invert = 1;
} else if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
ret = gpio_request(gpio, "sdhci-cd");
ret = devm_gpio_request(dev, gpio, "sdhci-cd");
if (ret) {
dev_err(dev, "card detect gpio request failed\n");
return -EINVAL;
......@@ -508,28 +508,20 @@ static int __devinit sdhci_s3c_parse_dt(struct device *dev,
gpio = of_get_gpio(node, cnt);
if (!gpio_is_valid(gpio)) {
dev_err(dev, "invalid gpio[%d]\n", cnt);
goto err_free_dt_cd_gpio;
return -EINVAL;
}
ourhost->gpios[cnt] = gpio;
}
for (cnt = 0; cnt < NUM_GPIOS(pdata->max_width); cnt++) {
ret = gpio_request(ourhost->gpios[cnt], "sdhci-gpio");
ret = devm_gpio_request(dev, ourhost->gpios[cnt], "sdhci-gpio");
if (ret) {
dev_err(dev, "gpio[%d] request failed\n", cnt);
goto err_free_dt_gpios;
return -EINVAL;
}
}
return 0;
err_free_dt_gpios:
while (--cnt >= 0)
gpio_free(ourhost->gpios[cnt]);
err_free_dt_cd_gpio:
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL)
gpio_free(ourhost->ext_cd_gpio);
return -EINVAL;
}
#else
static int __devinit sdhci_s3c_parse_dt(struct device *dev,
......@@ -586,13 +578,13 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
ret = -ENOMEM;
goto err_pdata;
goto err_pdata_io_clk;
}
if (pdev->dev.of_node) {
ret = sdhci_s3c_parse_dt(&pdev->dev, host, pdata);
if (ret)
goto err_pdata;
goto err_pdata_io_clk;
} else {
memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
sc->ext_cd_gpio = -1; /* invalid gpio number */
......@@ -610,7 +602,7 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
if (IS_ERR(sc->clk_io)) {
dev_err(dev, "failed to get io clock\n");
ret = PTR_ERR(sc->clk_io);
goto err_io_clk;
goto err_pdata_io_clk;
}
/* enable the local io clock and keep it running for the moment. */
......@@ -773,13 +765,7 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
clk_disable_unprepare(sc->clk_io);
clk_put(sc->clk_io);
err_io_clk:
for (ptr = 0; ptr < NUM_GPIOS(sc->pdata->max_width); ptr++)
gpio_free(sc->gpios[ptr]);
if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL)
gpio_free(sc->ext_cd_gpio);
err_pdata:
err_pdata_io_clk:
sdhci_free_host(host);
return ret;
......@@ -798,9 +784,6 @@ static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
if (sc->ext_cd_irq)
free_irq(sc->ext_cd_irq, sc);
if (gpio_is_valid(sc->ext_cd_gpio))
gpio_free(sc->ext_cd_gpio);
#ifdef CONFIG_PM_RUNTIME
if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
clk_prepare_enable(sc->clk_io);
......@@ -821,11 +804,6 @@ static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
clk_disable_unprepare(sc->clk_io);
clk_put(sc->clk_io);
if (pdev->dev.of_node) {
for (ptr = 0; ptr < NUM_GPIOS(sc->pdata->max_width); ptr++)
gpio_free(sc->gpios[ptr]);
}
sdhci_free_host(host);
platform_set_drvdata(pdev, NULL);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册