serial: add early_serial_setup() back to header file

early_serial_setup was removed from serial.h, but forgot to put in
serial_8250.h
Signed-off-by: NYinghai Lu <yinghai.lu@sun.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

arch/frv/kernel/setup.c

@@ -29,6 +29,7 @@
 #include <linux/serial.h>
 #include <linux/serial_core.h>
 #include <linux/serial_reg.h>
+#include <linux/serial_8250.h>
 
 #include <asm/setup.h>
 #include <asm/irq.h>

arch/mips/basler/excite/excite_setup.c

@@ -26,6 +26,7 @@
 #include <linux/tty.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
+#include <linux/serial_8250.h>
 #include <linux/ioport.h>
 #include <linux/spinlock.h>
 #include <asm/bootinfo.h>

arch/mips/gt64120/wrppmc/setup.c

@@ -14,6 +14,7 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 #include <linux/pm.h>
 
 #include <asm/io.h>

arch/mips/mips-boards/atlas/atlas_setup.c

@@ -22,6 +22,7 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 
 #include <asm/cpu.h>
 #include <asm/bootinfo.h>

arch/mips/mips-boards/sead/sead_setup.c

@@ -23,6 +23,7 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 
 #include <asm/cpu.h>
 #include <asm/bootinfo.h>

arch/mips/mipssim/sim_setup.c

@@ -26,6 +26,7 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 
 #include <asm/cpu.h>
 #include <asm/bootinfo.h>

arch/mips/pmc-sierra/msp71xx/msp_serial.c

@@ -32,6 +32,7 @@
 #include <asm/io.h>
 #include <asm/processor.h>
 #include <asm/serial.h>
+#include <linux/serial_8250.h>
 
 #include <msp_prom.h>
 #include <msp_int.h>

arch/mips/pmc-sierra/yosemite/setup.c

@@ -39,6 +39,7 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 
 #include <asm/time.h>
 #include <asm/bootinfo.h>

arch/ppc/platforms/4xx/bamboo.c

@@ -29,6 +29,7 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 #include <linux/ethtool.h>
 
 #include <asm/system.h>

arch/ppc/platforms/4xx/bubinga.c

@@ -21,6 +21,7 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 
 #include <asm/system.h>
 #include <asm/pci-bridge.h>

arch/ppc/platforms/4xx/cpci405.c

@@ -23,6 +23,7 @@
 #include <asm/todc.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 #include <asm/ocp.h>
 #include <asm/ibm_ocp_pci.h>
 #include <platforms/4xx/ibm405gp.h>

arch/ppc/platforms/4xx/ebony.c

@@ -32,6 +32,7 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>

arch/ppc/platforms/4xx/luan.c

@@ -30,6 +30,7 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>

arch/ppc/platforms/4xx/ocotea.c

@@ -30,6 +30,7 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>

arch/ppc/platforms/4xx/taishan.c

@@ -30,6 +30,7 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>

arch/ppc/platforms/4xx/yucca.c

@@ -31,6 +31,7 @@
 #include <linux/tty.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>

arch/ppc/platforms/85xx/sbc8560.c

@@ -26,6 +26,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>	/* for linux/serial_core.h */
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 #include <linux/initrd.h>
 #include <linux/module.h>
 #include <linux/fsl_devices.h>

arch/ppc/platforms/chestnut.c

@@ -25,6 +25,7 @@
 #include <linux/ide.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>

arch/ppc/platforms/ev64260.c

@@ -35,6 +35,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 #else
 #include <linux/mv643xx.h>
 #endif

arch/ppc/platforms/radstone_ppc7d.c

@@ -35,6 +35,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>		/* for linux/serial_core.h */
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 #include <linux/mv643xx.h>
 #include <linux/netdevice.h>
 #include <linux/platform_device.h>

arch/ppc/platforms/spruce.c

@@ -27,6 +27,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>

drivers/parisc/superio.c

@@ -73,6 +73,7 @@
 #include <linux/termios.h>
 #include <linux/tty.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 #include <linux/delay.h>
 
 #include <asm/io.h>

drivers/serial/8250_hp300.c

@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
+#include <linux/serial_8250.h>
 #include <linux/delay.h>
 #include <linux/dio.h>
 #include <linux/console.h>

include/linux/serial_8250.h

@@ -60,6 +60,8 @@ void serial8250_unregister_port(int line);
 void serial8250_suspend_port(int line);
 void serial8250_resume_port(int line);
 
+extern int early_serial_setup(struct uart_port *port);
+
 extern int serial8250_find_port(struct uart_port *p);
 extern int serial8250_find_port_for_earlycon(void);
 extern int setup_early_serial8250_console(char *cmdline);