提交 af741901 编写于 作者: M Mark Rustad 提交者: Jeff Kirsher

ixgbe: Take manageability semaphore for firmware commands

We need to take the manageability semaphore when issuing firmware
commands to avoid problems. With this in place, the semaphore is
no longer taken in the ixgbe_set_fw_drv_ver_generic function, since
it will now always be taken by the ixgbe_host_interface_command
function.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
上级 5cffde30
......@@ -3494,11 +3494,16 @@ s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, void *buffer,
struct ixgbe_hic_hdr hdr;
u32 u32arr[1];
} *bp = buffer;
s32 status;
if (!length || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
hw_dbg(hw, "Buffer length failure buffersize-%d.\n", length);
return IXGBE_ERR_HOST_INTERFACE_COMMAND;
}
/* Take management host interface semaphore */
status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
if (status)
return status;
/* Set bit 9 of FWSTS clearing FW reset indication */
fwsts = IXGBE_READ_REG(hw, IXGBE_FWSTS);
......@@ -3508,13 +3513,15 @@ s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, void *buffer,
hicr = IXGBE_READ_REG(hw, IXGBE_HICR);
if (!(hicr & IXGBE_HICR_EN)) {
hw_dbg(hw, "IXGBE_HOST_EN bit disabled.\n");
return IXGBE_ERR_HOST_INTERFACE_COMMAND;
status = IXGBE_ERR_HOST_INTERFACE_COMMAND;
goto rel_out;
}
/* Calculate length in DWORDs. We must be DWORD aligned */
if (length % sizeof(u32)) {
hw_dbg(hw, "Buffer length failure, not aligned to dword");
return IXGBE_ERR_INVALID_ARGUMENT;
status = IXGBE_ERR_INVALID_ARGUMENT;
goto rel_out;
}
dword_len = length >> 2;
......@@ -3540,11 +3547,12 @@ s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, void *buffer,
if ((timeout && i == timeout) ||
!(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV)) {
hw_dbg(hw, "Command has failed with no status valid.\n");
return IXGBE_ERR_HOST_INTERFACE_COMMAND;
status = IXGBE_ERR_HOST_INTERFACE_COMMAND;
goto rel_out;
}
if (!return_data)
return 0;
goto rel_out;
/* Calculate length in DWORDs */
dword_len = hdr_size >> 2;
......@@ -3558,11 +3566,12 @@ s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, void *buffer,
/* If there is any thing in data position pull it in */
buf_len = bp->hdr.buf_len;
if (!buf_len)
return 0;
goto rel_out;
if (length < round_up(buf_len, 4) + hdr_size) {
hw_dbg(hw, "Buffer not large enough for reply message.\n");
return IXGBE_ERR_HOST_INTERFACE_COMMAND;
status = IXGBE_ERR_HOST_INTERFACE_COMMAND;
goto rel_out;
}
/* Calculate length in DWORDs, add 3 for odd lengths */
......@@ -3574,7 +3583,10 @@ s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, void *buffer,
le32_to_cpus(&bp->u32arr[bi]);
}
return 0;
rel_out:
hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
return status;
}
/**
......@@ -3597,9 +3609,6 @@ s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min,
int i;
s32 ret_val;
if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM))
return IXGBE_ERR_SWFW_SYNC;
fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO;
fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN;
fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED;
......@@ -3631,7 +3640,6 @@ s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min,
break;
}
hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
return ret_val;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册