serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers
Add tunable RX interrupt trigger I/F of FIFO buffers. Serial devices are used as not only message communication devices but control or sending communication devices. For the latter uses, normally small data will be exchanged, so user applications want to receive data unit as soon as possible for real-time tendency. If we have a sensor which sends a 1 byte data each time and must control a device based on the sensor feedback, the RX interrupt should be triggered for each data. According to HW specification of serial UART devices, RX interrupt trigger can be changed, but the trigger is hard-coded. For example, RX interrupt trigger in 16550A can be set to 1, 4, 8, or 14 bytes for HW, but current driver sets the trigger to only 8bytes. This patch makes some devices change RX interrupt trigger from userland. <How to use> - Read current setting # cat /sys/class/tty/ttyS0/rx_trig_bytes 8 - Write user setting # echo 1 > /sys/class/tty/ttyS0/rx_trig_bytes # cat /sys/class/tty/ttyS0/rx_trig_bytes 1 <Support uart devices> - 16550A and Tegra (1, 4, 8, or 14 bytes) - 16650V2 (8, 16, 24, or 28 bytes) - 16654 (8, 16, 56, or 60 bytes) - 16750 (1, 16, 32, or 56 bytes) <Change log> Changes in V9: - Use attr_group instead of dev_spec_attr_group of uart_port structure Changes in V8: - Divide this patch from V7's patch based on Greg's comment Changes in V7: - Add Documentation - Change I/F name from rx_int_trig to rx_trig_bytes because the name rx_int_trig is hard to understand how users specify the value Changes in V6: - Move FCR_RX_TRIG_* definition in 8250.h to include/uapi/linux/serial_reg.h, rename those to UART_FCR_R_TRIG_*, and use UART_FCR_TRIGGER_MASK to UART_FCR_R_TRIG_BITS() - Change following function names: convert_fcr2val() => fcr_get_rxtrig_bytes() convert_val2rxtrig() => bytes_to_fcr_rxtrig() - Fix typo in serial8250_do_set_termios() - Delete the verbose error message pr_info() in bytes_to_fcr_rxtrig() - Rename *rx_int_trig/rx_trig* to *rxtrig* for several functions or variables (but UI remains rx_int_trig) - Change the meaningless variable name 'val' to 'bytes' following functions: fcr_get_rxtrig_bytes(), bytes_to_fcr_rxtrig(), do_set_rxtrig(), do_serial8250_set_rxtrig(), and serial8250_set_attr_rxtrig() - Use up->fcr in order to get rxtrig_bytes instead of rx_trig_raw in fcr_get_rxtrig_bytes() - Use conf_type->rxtrig_bytes[0] instead of switch statement for support check in register_dev_spec_attr_grp() - Delete the checking whether a user changed FCR or not when minimum buffer is needed in serial8250_do_set_termios() Changes in V5.1: - Fix FCR_RX_TRIG_MAX_STATE definition Changes in V5: - Support Tegra, 16650V2, 16654, and 16750 - Store default FCR value to up->fcr when the port is first created - Add rx_trig_byte[] in uart_config[] for each device and use rx_trig_byte[] in convert_fcr2val() and convert_val2rxtrig() Changes in V4: - Introduce fifo_bug flag in uart_8250_port structure This is enabled only when parity is enabled and UART_BUG_PARITY is enabled for up->bugs. If this flag is enabled, user cannot set RX trigger. - Return -EOPNOTSUPP when it does not support device at convert_fcr2val() and at convert_val2rxtrig() - Set the nearest lower RX trigger when users input a meaningless value at convert_val2rxtrig() - Check whether p->fcr is existing at serial8250_clear_and_reinit_fifos() - Set fcr = up->fcr in the begging of serial8250_do_set_termios() Changes in V3: - Change I/F from ioctl(2) to sysfs(rx_int_trig) Changed in V2: - Use _IOW for TIOCSFIFORTRIG definition - Pass the interrupt trigger value itself Signed-off-by: NYoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Showing
想要评论请 注册 或 登录