提交 aecd67b6 编写于 作者: J Jesper Dangaard Brouer 提交者: Alexei Starovoitov

xdp: base API for new XDP rx-queue info concept

This patch only introduce the core data structures and API functions.
All XDP enabled drivers must use the API before this info can used.

There is a need for XDP to know more about the RX-queue a given XDP
frames have arrived on.  For both the XDP bpf-prog and kernel side.

Instead of extending xdp_buff each time new info is needed, the patch
creates a separate read-mostly struct xdp_rxq_info, that contains this
info.  We stress this data/cache-line is for read-only info.  This is
NOT for dynamic per packet info, use the data_meta for such use-cases.

The performance advantage is this info can be setup at RX-ring init
time, instead of updating N-members in xdp_buff.  A possible (driver
level) micro optimization is that xdp_buff->rxq assignment could be
done once per XDP/NAPI loop.  The extra pointer deref only happens for
program needing access to this info (thus, no slowdown to existing
use-cases).
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
上级 5f103c5d
......@@ -20,6 +20,7 @@
#include <linux/set_memory.h>
#include <linux/kallsyms.h>
#include <net/xdp.h>
#include <net/sch_generic.h>
#include <uapi/linux/filter.h>
......@@ -503,6 +504,7 @@ struct xdp_buff {
void *data_end;
void *data_meta;
void *data_hard_start;
struct xdp_rxq_info *rxq;
};
/* Compute the linear packet data range [data, data_end) which
......
/* include/net/xdp.h
*
* Copyright (c) 2017 Jesper Dangaard Brouer, Red Hat Inc.
* Released under terms in GPL version 2. See COPYING.
*/
#ifndef __LINUX_NET_XDP_H__
#define __LINUX_NET_XDP_H__
/**
* DOC: XDP RX-queue information
*
* The XDP RX-queue info (xdp_rxq_info) is associated with the driver
* level RX-ring queues. It is information that is specific to how
* the driver have configured a given RX-ring queue.
*
* Each xdp_buff frame received in the driver carry a (pointer)
* reference to this xdp_rxq_info structure. This provides the XDP
* data-path read-access to RX-info for both kernel and bpf-side
* (limited subset).
*
* For now, direct access is only safe while running in NAPI/softirq
* context. Contents is read-mostly and must not be updated during
* driver NAPI/softirq poll.
*
* The driver usage API is a register and unregister API.
*
* The struct is not directly tied to the XDP prog. A new XDP prog
* can be attached as long as it doesn't change the underlying
* RX-ring. If the RX-ring does change significantly, the NIC driver
* naturally need to stop the RX-ring before purging and reallocating
* memory. In that process the driver MUST call unregistor (which
* also apply for driver shutdown and unload). The register API is
* also mandatory during RX-ring setup.
*/
struct xdp_rxq_info {
struct net_device *dev;
u32 queue_index;
u32 reg_state;
} ____cacheline_aligned; /* perf critical, avoid false-sharing */
int xdp_rxq_info_reg(struct xdp_rxq_info *xdp_rxq,
struct net_device *dev, u32 queue_index);
void xdp_rxq_info_unreg(struct xdp_rxq_info *xdp_rxq);
void xdp_rxq_info_unused(struct xdp_rxq_info *xdp_rxq);
#endif /* __LINUX_NET_XDP_H__ */
......@@ -11,7 +11,7 @@ obj-$(CONFIG_SYSCTL) += sysctl_net_core.o
obj-y += dev.o ethtool.o dev_addr_lists.o dst.o netevent.o \
neighbour.o rtnetlink.o utils.o link_watch.o filter.o \
sock_diag.o dev_ioctl.o tso.o sock_reuseport.o \
fib_notifier.o
fib_notifier.o xdp.o
obj-y += net-sysfs.o
obj-$(CONFIG_PROC_FS) += net-procfs.o
......
/* net/core/xdp.c
*
* Copyright (c) 2017 Jesper Dangaard Brouer, Red Hat Inc.
* Released under terms in GPL version 2. See COPYING.
*/
#include <linux/types.h>
#include <linux/mm.h>
#include <net/xdp.h>
#define REG_STATE_NEW 0x0
#define REG_STATE_REGISTERED 0x1
#define REG_STATE_UNREGISTERED 0x2
#define REG_STATE_UNUSED 0x3
void xdp_rxq_info_unreg(struct xdp_rxq_info *xdp_rxq)
{
/* Simplify driver cleanup code paths, allow unreg "unused" */
if (xdp_rxq->reg_state == REG_STATE_UNUSED)
return;
WARN(!(xdp_rxq->reg_state == REG_STATE_REGISTERED), "Driver BUG");
xdp_rxq->reg_state = REG_STATE_UNREGISTERED;
xdp_rxq->dev = NULL;
}
EXPORT_SYMBOL_GPL(xdp_rxq_info_unreg);
static void xdp_rxq_info_init(struct xdp_rxq_info *xdp_rxq)
{
memset(xdp_rxq, 0, sizeof(*xdp_rxq));
}
/* Returns 0 on success, negative on failure */
int xdp_rxq_info_reg(struct xdp_rxq_info *xdp_rxq,
struct net_device *dev, u32 queue_index)
{
if (xdp_rxq->reg_state == REG_STATE_UNUSED) {
WARN(1, "Driver promised not to register this");
return -EINVAL;
}
if (xdp_rxq->reg_state == REG_STATE_REGISTERED) {
WARN(1, "Missing unregister, handled but fix driver");
xdp_rxq_info_unreg(xdp_rxq);
}
if (!dev) {
WARN(1, "Missing net_device from driver");
return -ENODEV;
}
/* State either UNREGISTERED or NEW */
xdp_rxq_info_init(xdp_rxq);
xdp_rxq->dev = dev;
xdp_rxq->queue_index = queue_index;
xdp_rxq->reg_state = REG_STATE_REGISTERED;
return 0;
}
EXPORT_SYMBOL_GPL(xdp_rxq_info_reg);
void xdp_rxq_info_unused(struct xdp_rxq_info *xdp_rxq)
{
xdp_rxq->reg_state = REG_STATE_UNUSED;
}
EXPORT_SYMBOL_GPL(xdp_rxq_info_unused);
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册