ARM: dts: da850-evm: use phandles to extend nodes

Many node labels in the device tree (like serial0, serial1, etc) are being
redefined, so let's modernize the device tree by using phandles to
extend the existing nodes.  This helps reduce the whitespace.
Signed-off-by: NAdam Ford <aford173@gmail.com>
[nsekhar@ti.com: drop tps6507x related changes]
Signed-off-by: NSekhar Nori <nsekhar@ti.com>

arch/arm/boot/dts/da850-evm.dts

@@ -27,143 +27,6 @@ aliases {
 		spi0 = &spi1;
 	};
 
-	soc@1c00000 {
-		pmx_core: pinmux@14120 {
-			status = "okay";
-
-			mcasp0_pins: pinmux_mcasp0_pins {
-				pinctrl-single,bits = <
-					/*
-					 * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR,
-					 * AFSR, AMUTE
-					 */
-					0x00 0x11111111 0xffffffff
-					/* AXR11, AXR12 */
-					0x04 0x00011000 0x000ff000
-				>;
-			};
-			nand_pins: nand_pins {
-				pinctrl-single,bits = <
-					/* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[4], EMA_CS[3] */
-					0x1c 0x10110110  0xf0ff0ff0
-					/*
-					 * EMA_D[0], EMA_D[1], EMA_D[2],
-					 * EMA_D[3], EMA_D[4], EMA_D[5],
-					 * EMA_D[6], EMA_D[7]
-					 */
-					0x24 0x11111111  0xffffffff
-					/* EMA_A[1], EMA_A[2] */
-					0x30 0x01100000  0x0ff00000
-				>;
-			};
-		};
-		serial0: serial@42000 {
-			status = "okay";
-		};
-		serial1: serial@10c000 {
-			status = "okay";
-		};
-		serial2: serial@10d000 {
-			status = "okay";
-		};
-		rtc0: rtc@23000 {
-			status = "okay";
-		};
-		i2c0: i2c@22000 {
-			status = "okay";
-			clock-frequency = <100000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins>;
-
-			tps: tps@48 {
-				reg = <0x48>;
-			};
-			tlv320aic3106: tlv320aic3106@18 {
-				#sound-dai-cells = <0>;
-				compatible = "ti,tlv320aic3106";
-				reg = <0x18>;
-				status = "okay";
-
-				/* Regulators */
-				IOVDD-supply = <&vdcdc2_reg>;
-				/* Derived from VBAT: Baseboard 3.3V / 1.8V */
-				AVDD-supply = <&vbat>;
-				DRVDD-supply = <&vbat>;
-				DVDD-supply = <&vbat>;
-			};
-			tca6416: gpio@20 {
-				compatible = "ti,tca6416";
-				reg = <0x20>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-		};
-		wdt: wdt@21000 {
-			status = "okay";
-		};
-		mmc0: mmc@40000 {
-			max-frequency = <50000000>;
-			bus-width = <4>;
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins>;
-		};
-		spi1: spi@30e000 {
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
-			flash: m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "m25p64";
-				spi-max-frequency = <30000000>;
-				m25p,fast-read;
-				reg = <0>;
-				partition@0 {
-					label = "U-Boot-SPL";
-					reg = <0x00000000 0x00010000>;
-					read-only;
-				};
-				partition@1 {
-					label = "U-Boot";
-					reg = <0x00010000 0x00080000>;
-					read-only;
-				};
-				partition@2 {
-					label = "U-Boot-Env";
-					reg = <0x00090000 0x00010000>;
-					read-only;
-				};
-				partition@3 {
-					label = "Kernel";
-					reg = <0x000a0000 0x00280000>;
-				};
-				partition@4 {
-					label = "Filesystem";
-					reg = <0x00320000 0x00400000>;
-				};
-				partition@5 {
-					label = "MAC-Address";
-					reg = <0x007f0000 0x00010000>;
-					read-only;
-				};
-			};
-		};
-		mdio: mdio@224000 {
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mdio_pins>;
-			bus_freq = <2200000>;
-		};
-		eth0: ethernet@220000 {
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mii_pins>;
-		};
-		gpio: gpio@226000 {
-			status = "okay";
-		};
-	};
 	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
@@ -200,6 +63,153 @@ link0_codec: simple-audio-card,codec {
 	};
 };
 
+&pmx_core {
+	status = "okay";
+
+	mcasp0_pins: pinmux_mcasp0_pins {
+		pinctrl-single,bits = <
+			/*
+			 * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR,
+			 * AFSR, AMUTE
+			 */
+			0x00 0x11111111 0xffffffff
+			/* AXR11, AXR12 */
+			0x04 0x00011000 0x000ff000
+		>;
+	};
+	nand_pins: nand_pins {
+		pinctrl-single,bits = <
+			/* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[4], EMA_CS[3] */
+			0x1c 0x10110110  0xf0ff0ff0
+			/*
+			 * EMA_D[0], EMA_D[1], EMA_D[2],
+			 * EMA_D[3], EMA_D[4], EMA_D[5],
+			 * EMA_D[6], EMA_D[7]
+			 */
+			0x24 0x11111111  0xffffffff
+			/* EMA_A[1], EMA_A[2] */
+			0x30 0x01100000  0x0ff00000
+		>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&rtc0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	tps: tps@48 {
+		reg = <0x48>;
+	};
+	tlv320aic3106: tlv320aic3106@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x18>;
+		status = "okay";
+
+		/* Regulators */
+		IOVDD-supply = <&vdcdc2_reg>;
+		/* Derived from VBAT: Baseboard 3.3V / 1.8V */
+		AVDD-supply = <&vbat>;
+		DRVDD-supply = <&vbat>;
+		DVDD-supply = <&vbat>;
+	};
+	tca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&wdt {
+	status = "okay";
+};
+
+&mmc0 {
+	max-frequency = <50000000>;
+	bus-width = <4>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
+	flash: m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p64";
+		spi-max-frequency = <30000000>;
+		m25p,fast-read;
+		reg = <0>;
+		partition@0 {
+			label = "U-Boot-SPL";
+			reg = <0x00000000 0x00010000>;
+			read-only;
+		};
+		partition@1 {
+			label = "U-Boot";
+			reg = <0x00010000 0x00080000>;
+			read-only;
+		};
+		partition@2 {
+			label = "U-Boot-Env";
+			reg = <0x00090000 0x00010000>;
+			read-only;
+		};
+		partition@3 {
+			label = "Kernel";
+			reg = <0x000a0000 0x00280000>;
+		};
+		partition@4 {
+			label = "Filesystem";
+			reg = <0x00320000 0x00400000>;
+		};
+		partition@5 {
+			label = "MAC-Address";
+			reg = <0x007f0000 0x00010000>;
+			read-only;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	bus_freq = <2200000>;
+};
+
+&eth0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mii_pins>;
+};
+
+&gpio {
+	status = "okay";
+};
+
 /include/ "tps6507x.dtsi"
 
 &tps {