提交 abc01b27 编写于 作者: J Jean Delvare 提交者: Jean Delvare

i2c-algo-bit: Return standard fault codes

Adjust i2c-algo-bit to return fault codes compliant with
Documentation/i2c/fault-codes, rather than the undocumented and
vague -EREMOTEIO.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
上级 f6beb67d
......@@ -443,7 +443,7 @@ static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
acknak(i2c_adap, 0);
dev_err(&i2c_adap->dev, "readbytes: invalid "
"block length (%d)\n", inval);
return -EREMOTEIO;
return -EPROTO;
}
/* The original count value accounts for the extra
bytes, that is, either 1 for a regular transaction,
......@@ -472,7 +472,7 @@ static int readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
* reads, writes as well as 10bit-addresses.
* returns:
* 0 everything went okay, the chip ack'ed, or IGNORE_NAK flag was set
* -x an error occurred (like: -EREMOTEIO if the device did not answer, or
* -x an error occurred (like: -ENXIO if the device did not answer, or
* -ETIMEDOUT, for example if the lines are stuck...)
*/
static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
......@@ -495,14 +495,14 @@ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
if ((ret != 1) && !nak_ok) {
dev_err(&i2c_adap->dev,
"died at extended address code\n");
return -EREMOTEIO;
return -ENXIO;
}
/* the remaining 8 bit address */
ret = i2c_outb(i2c_adap, msg->addr & 0x7f);
if ((ret != 1) && !nak_ok) {
/* the chip did not ack / xmission error occurred */
dev_err(&i2c_adap->dev, "died at 2nd address code\n");
return -EREMOTEIO;
return -ENXIO;
}
if (flags & I2C_M_RD) {
bit_dbg(3, &i2c_adap->dev, "emitting repeated "
......@@ -514,7 +514,7 @@ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg)
if ((ret != 1) && !nak_ok) {
dev_err(&i2c_adap->dev,
"died at repeated address code\n");
return -EREMOTEIO;
return -EIO;
}
}
} else { /* normal 7bit address */
......@@ -572,7 +572,7 @@ static int bit_xfer(struct i2c_adapter *i2c_adap,
ret, ret == 1 ? "" : "s");
if (ret < pmsg->len) {
if (ret >= 0)
ret = -EREMOTEIO;
ret = -EIO;
goto bailout;
}
} else {
......@@ -583,7 +583,7 @@ static int bit_xfer(struct i2c_adapter *i2c_adap,
ret, ret == 1 ? "" : "s");
if (ret < pmsg->len) {
if (ret >= 0)
ret = -EREMOTEIO;
ret = -EIO;
goto bailout;
}
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册