提交 aab547ce 编写于 作者: M Michael Buesch 提交者: John W. Linville

ssb: Add Gigabit Ethernet driver

This adds the Gigabit Ethernet driver for the SSB
Gigabit Ethernet core. This driver actually is a frontend to
the Tigon3 driver. So the real work is done by tg3.
This device is used in the Linksys WRT350N.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 69d3b6f4
......@@ -125,4 +125,13 @@ config SSB_DRIVER_EXTIF
If unsure, say N
config SSB_DRIVER_GIGE
bool "SSB Broadcom Gigabit Ethernet driver"
depends on SSB_PCIHOST_POSSIBLE && SSB_EMBEDDED && MIPS
help
Driver for the Sonics Silicon Backplane attached
Broadcom Gigabit Ethernet.
If unsure, say N
endmenu
......@@ -11,6 +11,7 @@ ssb-y += driver_chipcommon.o
ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o
ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o
ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
ssb-$(CONFIG_SSB_DRIVER_GIGE) += driver_gige.o
# b43 pci-ssb-bridge driver
# Not strictly a part of SSB, but kept here for convenience
......
/*
* Sonics Silicon Backplane
* Broadcom Gigabit Ethernet core driver
*
* Copyright 2008, Broadcom Corporation
* Copyright 2008, Michael Buesch <mb@bu3sch.de>
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_driver_gige.h>
#include <linux/pci.h>
#include <linux/pci_regs.h>
/*
MODULE_DESCRIPTION("SSB Broadcom Gigabit Ethernet driver");
MODULE_AUTHOR("Michael Buesch");
MODULE_LICENSE("GPL");
*/
static const struct ssb_device_id ssb_gige_tbl[] = {
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_ETHERNET_GBIT, SSB_ANY_REV),
SSB_DEVTABLE_END
};
/* MODULE_DEVICE_TABLE(ssb, ssb_gige_tbl); */
static inline u8 gige_read8(struct ssb_gige *dev, u16 offset)
{
return ssb_read8(dev->dev, offset);
}
static inline u16 gige_read16(struct ssb_gige *dev, u16 offset)
{
return ssb_read16(dev->dev, offset);
}
static inline u32 gige_read32(struct ssb_gige *dev, u16 offset)
{
return ssb_read32(dev->dev, offset);
}
static inline void gige_write8(struct ssb_gige *dev,
u16 offset, u8 value)
{
ssb_write8(dev->dev, offset, value);
}
static inline void gige_write16(struct ssb_gige *dev,
u16 offset, u16 value)
{
ssb_write16(dev->dev, offset, value);
}
static inline void gige_write32(struct ssb_gige *dev,
u16 offset, u32 value)
{
ssb_write32(dev->dev, offset, value);
}
static inline
u8 gige_pcicfg_read8(struct ssb_gige *dev, unsigned int offset)
{
BUG_ON(offset >= 256);
return gige_read8(dev, SSB_GIGE_PCICFG + offset);
}
static inline
u16 gige_pcicfg_read16(struct ssb_gige *dev, unsigned int offset)
{
BUG_ON(offset >= 256);
return gige_read16(dev, SSB_GIGE_PCICFG + offset);
}
static inline
u32 gige_pcicfg_read32(struct ssb_gige *dev, unsigned int offset)
{
BUG_ON(offset >= 256);
return gige_read32(dev, SSB_GIGE_PCICFG + offset);
}
static inline
void gige_pcicfg_write8(struct ssb_gige *dev,
unsigned int offset, u8 value)
{
BUG_ON(offset >= 256);
gige_write8(dev, SSB_GIGE_PCICFG + offset, value);
}
static inline
void gige_pcicfg_write16(struct ssb_gige *dev,
unsigned int offset, u16 value)
{
BUG_ON(offset >= 256);
gige_write16(dev, SSB_GIGE_PCICFG + offset, value);
}
static inline
void gige_pcicfg_write32(struct ssb_gige *dev,
unsigned int offset, u32 value)
{
BUG_ON(offset >= 256);
gige_write32(dev, SSB_GIGE_PCICFG + offset, value);
}
static int ssb_gige_pci_read_config(struct pci_bus *bus, unsigned int devfn,
int reg, int size, u32 *val)
{
struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
unsigned long flags;
if ((PCI_SLOT(devfn) > 0) || (PCI_FUNC(devfn) > 0))
return PCIBIOS_DEVICE_NOT_FOUND;
if (reg >= 256)
return PCIBIOS_DEVICE_NOT_FOUND;
spin_lock_irqsave(&dev->lock, flags);
switch (size) {
case 1:
*val = gige_pcicfg_read8(dev, reg);
break;
case 2:
*val = gige_pcicfg_read16(dev, reg);
break;
case 4:
*val = gige_pcicfg_read32(dev, reg);
break;
default:
WARN_ON(1);
}
spin_unlock_irqrestore(&dev->lock, flags);
return PCIBIOS_SUCCESSFUL;
}
static int ssb_gige_pci_write_config(struct pci_bus *bus, unsigned int devfn,
int reg, int size, u32 val)
{
struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
unsigned long flags;
if ((PCI_SLOT(devfn) > 0) || (PCI_FUNC(devfn) > 0))
return PCIBIOS_DEVICE_NOT_FOUND;
if (reg >= 256)
return PCIBIOS_DEVICE_NOT_FOUND;
spin_lock_irqsave(&dev->lock, flags);
switch (size) {
case 1:
gige_pcicfg_write8(dev, reg, val);
break;
case 2:
gige_pcicfg_write16(dev, reg, val);
break;
case 4:
gige_pcicfg_write32(dev, reg, val);
break;
default:
WARN_ON(1);
}
spin_unlock_irqrestore(&dev->lock, flags);
return PCIBIOS_SUCCESSFUL;
}
static int ssb_gige_probe(struct ssb_device *sdev, const struct ssb_device_id *id)
{
struct ssb_gige *dev;
u32 base, tmslow, tmshigh;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
dev->dev = sdev;
spin_lock_init(&dev->lock);
dev->pci_controller.pci_ops = &dev->pci_ops;
dev->pci_controller.io_resource = &dev->io_resource;
dev->pci_controller.mem_resource = &dev->mem_resource;
dev->pci_controller.io_map_base = 0x800;
dev->pci_ops.read = ssb_gige_pci_read_config;
dev->pci_ops.write = ssb_gige_pci_write_config;
dev->io_resource.name = SSB_GIGE_IO_RES_NAME;
dev->io_resource.start = 0x800;
dev->io_resource.end = 0x8FF;
dev->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED;
if (!ssb_device_is_enabled(sdev))
ssb_device_enable(sdev, 0);
/* Setup BAR0. This is a 64k MMIO region. */
base = ssb_admatch_base(ssb_read32(sdev, SSB_ADMATCH1));
gige_pcicfg_write32(dev, PCI_BASE_ADDRESS_0, base);
gige_pcicfg_write32(dev, PCI_BASE_ADDRESS_1, 0);
dev->mem_resource.name = SSB_GIGE_MEM_RES_NAME;
dev->mem_resource.start = base;
dev->mem_resource.end = base + 0x10000 - 1;
dev->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED;
/* Enable the memory region. */
gige_pcicfg_write16(dev, PCI_COMMAND,
gige_pcicfg_read16(dev, PCI_COMMAND)
| PCI_COMMAND_MEMORY);
/* Write flushing is controlled by the Flush Status Control register.
* We want to flush every register write with a timeout and we want
* to disable the IRQ mask while flushing to avoid concurrency.
* Note that automatic write flushing does _not_ work from
* an IRQ handler. The driver must flush manually by reading a register.
*/
gige_write32(dev, SSB_GIGE_SHIM_FLUSHSTAT, 0x00000068);
/* Check if we have an RGMII or GMII PHY-bus.
* On RGMII do not bypass the DLLs */
tmslow = ssb_read32(sdev, SSB_TMSLOW);
tmshigh = ssb_read32(sdev, SSB_TMSHIGH);
if (tmshigh & SSB_GIGE_TMSHIGH_RGMII) {
tmslow &= ~SSB_GIGE_TMSLOW_TXBYPASS;
tmslow &= ~SSB_GIGE_TMSLOW_RXBYPASS;
dev->has_rgmii = 1;
} else {
tmslow |= SSB_GIGE_TMSLOW_TXBYPASS;
tmslow |= SSB_GIGE_TMSLOW_RXBYPASS;
dev->has_rgmii = 0;
}
tmslow |= SSB_GIGE_TMSLOW_DLLEN;
ssb_write32(sdev, SSB_TMSLOW, tmslow);
ssb_set_drvdata(sdev, dev);
register_pci_controller(&dev->pci_controller);
return 0;
}
bool pdev_is_ssb_gige_core(struct pci_dev *pdev)
{
if (!pdev->resource[0].name)
return 0;
return (strcmp(pdev->resource[0].name, SSB_GIGE_MEM_RES_NAME) == 0);
}
EXPORT_SYMBOL(pdev_is_ssb_gige_core);
int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
struct pci_dev *pdev)
{
struct ssb_gige *dev = ssb_get_drvdata(sdev);
struct resource *res;
if (pdev->bus->ops != &dev->pci_ops) {
/* The PCI device is not on this SSB GigE bridge device. */
return -ENODEV;
}
/* Fixup the PCI resources. */
res = &(pdev->resource[0]);
res->flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED;
res->name = dev->mem_resource.name;
res->start = dev->mem_resource.start;
res->end = dev->mem_resource.end;
/* Fixup interrupt lines. */
pdev->irq = ssb_mips_irq(sdev) + 2;
pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, pdev->irq);
return 0;
}
int ssb_gige_map_irq(struct ssb_device *sdev,
const struct pci_dev *pdev)
{
struct ssb_gige *dev = ssb_get_drvdata(sdev);
if (pdev->bus->ops != &dev->pci_ops) {
/* The PCI device is not on this SSB GigE bridge device. */
return -ENODEV;
}
return ssb_mips_irq(sdev) + 2;
}
static struct ssb_driver ssb_gige_driver = {
.name = "BCM-GigE",
.id_table = ssb_gige_tbl,
.probe = ssb_gige_probe,
};
int ssb_gige_init(void)
{
return ssb_driver_register(&ssb_gige_driver);
}
......@@ -209,6 +209,7 @@ void ssb_mipscore_init(struct ssb_mipscore *mcore)
/* fallthrough */
case SSB_DEV_PCI:
case SSB_DEV_ETHERNET:
case SSB_DEV_ETHERNET_GBIT:
case SSB_DEV_80211:
case SSB_DEV_USB20_HOST:
/* These devices get their own IRQ line if available, the rest goes on IRQ0 */
......
......@@ -60,77 +60,6 @@ static DEFINE_SPINLOCK(cfgspace_lock);
/* Core to access the external PCI config space. Can only have one. */
static struct ssb_pcicore *extpci_core;
static u32 ssb_pcicore_pcibus_iobase = 0x100;
static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
int pcibios_plat_dev_init(struct pci_dev *d)
{
struct resource *res;
int pos, size;
u32 *base;
ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
pci_name(d));
/* Fix up resource bases */
for (pos = 0; pos < 6; pos++) {
res = &d->resource[pos];
if (res->flags & IORESOURCE_IO)
base = &ssb_pcicore_pcibus_iobase;
else
base = &ssb_pcicore_pcibus_membase;
res->flags |= IORESOURCE_PCI_FIXED;
if (res->end) {
size = res->end - res->start + 1;
if (*base & (size - 1))
*base = (*base + size) & ~(size - 1);
res->start = *base;
res->end = res->start + size - 1;
*base += size;
pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
}
/* Fix up PCI bridge BAR0 only */
if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
break;
}
/* Fix up interrupt lines */
d->irq = ssb_mips_irq(extpci_core->dev) + 2;
pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
return 0;
}
static void __init ssb_fixup_pcibridge(struct pci_dev *dev)
{
u8 lat;
if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
return;
ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
/* Enable PCI bridge bus mastering and memory space */
pci_set_master(dev);
if (pcibios_enable_device(dev, ~0) < 0) {
ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
return;
}
/* Enable PCI bridge BAR1 prefetch and burst */
pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
/* Make sure our latency is high enough to handle the devices behind us */
lat = 168;
ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
pci_name(dev), lat);
pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
}
DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge);
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
return ssb_mips_irq(extpci_core->dev) + 2;
}
static u32 get_cfgspace_addr(struct ssb_pcicore *pc,
unsigned int bus, unsigned int dev,
......@@ -320,6 +249,95 @@ static struct pci_controller ssb_pcicore_controller = {
.mem_offset = 0x24000000,
};
static u32 ssb_pcicore_pcibus_iobase = 0x100;
static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
/* This function is called when doing a pci_enable_device().
* We must first check if the device is a device on the PCI-core bridge. */
int ssb_pcicore_plat_dev_init(struct pci_dev *d)
{
struct resource *res;
int pos, size;
u32 *base;
if (d->bus->ops != &ssb_pcicore_pciops) {
/* This is not a device on the PCI-core bridge. */
return -ENODEV;
}
ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
pci_name(d));
/* Fix up resource bases */
for (pos = 0; pos < 6; pos++) {
res = &d->resource[pos];
if (res->flags & IORESOURCE_IO)
base = &ssb_pcicore_pcibus_iobase;
else
base = &ssb_pcicore_pcibus_membase;
res->flags |= IORESOURCE_PCI_FIXED;
if (res->end) {
size = res->end - res->start + 1;
if (*base & (size - 1))
*base = (*base + size) & ~(size - 1);
res->start = *base;
res->end = res->start + size - 1;
*base += size;
pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
}
/* Fix up PCI bridge BAR0 only */
if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
break;
}
/* Fix up interrupt lines */
d->irq = ssb_mips_irq(extpci_core->dev) + 2;
pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
return 0;
}
/* Early PCI fixup for a device on the PCI-core bridge. */
static void ssb_pcicore_fixup_pcibridge(struct pci_dev *dev)
{
u8 lat;
if (dev->bus->ops != &ssb_pcicore_pciops) {
/* This is not a device on the PCI-core bridge. */
return;
}
if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
return;
ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
/* Enable PCI bridge bus mastering and memory space */
pci_set_master(dev);
if (pcibios_enable_device(dev, ~0) < 0) {
ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
return;
}
/* Enable PCI bridge BAR1 prefetch and burst */
pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
/* Make sure our latency is high enough to handle the devices behind us */
lat = 168;
ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
pci_name(dev), lat);
pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
}
DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge);
/* PCI device IRQ mapping. */
int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
if (dev->bus->ops != &ssb_pcicore_pciops) {
/* This is not a device on the PCI-core bridge. */
return -ENODEV;
}
return ssb_mips_irq(extpci_core->dev) + 2;
}
static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
{
u32 val;
......
......@@ -10,6 +10,9 @@
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
#include <linux/ssb/ssb_driver_pci.h>
#include <linux/ssb/ssb_driver_gige.h>
#include <linux/pci.h>
#include "ssb_private.h"
......@@ -130,3 +133,90 @@ u32 ssb_gpio_polarity(struct ssb_bus *bus, u32 mask, u32 value)
return res;
}
EXPORT_SYMBOL(ssb_gpio_polarity);
#ifdef CONFIG_SSB_DRIVER_GIGE
static int gige_pci_init_callback(struct ssb_bus *bus, unsigned long data)
{
struct pci_dev *pdev = (struct pci_dev *)data;
struct ssb_device *dev;
unsigned int i;
int res;
for (i = 0; i < bus->nr_devices; i++) {
dev = &(bus->devices[i]);
if (dev->id.coreid != SSB_DEV_ETHERNET_GBIT)
continue;
if (!dev->dev ||
!dev->dev->driver ||
!device_is_registered(dev->dev))
continue;
res = ssb_gige_pcibios_plat_dev_init(dev, pdev);
if (res >= 0)
return res;
}
return -ENODEV;
}
#endif /* CONFIG_SSB_DRIVER_GIGE */
int ssb_pcibios_plat_dev_init(struct pci_dev *dev)
{
int err;
err = ssb_pcicore_plat_dev_init(dev);
if (!err)
return 0;
#ifdef CONFIG_SSB_DRIVER_GIGE
err = ssb_for_each_bus_call((unsigned long)dev, gige_pci_init_callback);
if (err >= 0)
return err;
#endif
/* This is not a PCI device on any SSB device. */
return -ENODEV;
}
#ifdef CONFIG_SSB_DRIVER_GIGE
static int gige_map_irq_callback(struct ssb_bus *bus, unsigned long data)
{
const struct pci_dev *pdev = (const struct pci_dev *)data;
struct ssb_device *dev;
unsigned int i;
int res;
for (i = 0; i < bus->nr_devices; i++) {
dev = &(bus->devices[i]);
if (dev->id.coreid != SSB_DEV_ETHERNET_GBIT)
continue;
if (!dev->dev ||
!dev->dev->driver ||
!device_is_registered(dev->dev))
continue;
res = ssb_gige_map_irq(dev, pdev);
if (res >= 0)
return res;
}
return -ENODEV;
}
#endif /* CONFIG_SSB_DRIVER_GIGE */
int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int res;
/* Check if this PCI device is a device on a SSB bus or device
* and return the IRQ number for it. */
res = ssb_pcicore_pcibios_map_irq(dev, slot, pin);
if (res >= 0)
return res;
#ifdef CONFIG_SSB_DRIVER_GIGE
res = ssb_for_each_bus_call((unsigned long)dev, gige_map_irq_callback);
if (res >= 0)
return res;
#endif
/* This is not a PCI device on any SSB device. */
return -ENODEV;
}
......@@ -14,6 +14,7 @@
#include <linux/io.h>
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_regs.h>
#include <linux/ssb/ssb_driver_gige.h>
#include <linux/dma-mapping.h>
#include <linux/pci.h>
......@@ -68,6 +69,25 @@ struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev)
}
#endif /* CONFIG_SSB_PCIHOST */
int ssb_for_each_bus_call(unsigned long data,
int (*func)(struct ssb_bus *bus, unsigned long data))
{
struct ssb_bus *bus;
int res;
ssb_buses_lock();
list_for_each_entry(bus, &buses, list) {
res = func(bus, data);
if (res >= 0) {
ssb_buses_unlock();
return res;
}
}
ssb_buses_unlock();
return -ENODEV;
}
static struct ssb_device *ssb_device_get(struct ssb_device *dev)
{
if (dev)
......@@ -1171,7 +1191,14 @@ static int __init ssb_modinit(void)
err = b43_pci_ssb_bridge_init();
if (err) {
ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
"initialization failed");
"initialization failed\n");
/* don't fail SSB init because of this */
err = 0;
}
err = ssb_gige_init();
if (err) {
ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet "
"driver initialization failed\n");
/* don't fail SSB init because of this */
err = 0;
}
......@@ -1185,6 +1212,7 @@ fs_initcall(ssb_modinit);
static void __exit ssb_modexit(void)
{
ssb_gige_exit();
b43_pci_ssb_bridge_exit();
bus_unregister(&ssb_bustype);
}
......
......@@ -118,6 +118,8 @@ extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m);
extern int ssb_devices_freeze(struct ssb_bus *bus);
extern int ssb_devices_thaw(struct ssb_bus *bus);
extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev);
int ssb_for_each_bus_call(unsigned long data,
int (*func)(struct ssb_bus *bus, unsigned long data));
/* b43_pci_bridge.c */
#ifdef CONFIG_SSB_B43_PCI_BRIDGE
......
......@@ -422,5 +422,12 @@ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
extern u32 ssb_admatch_base(u32 adm);
extern u32 ssb_admatch_size(u32 adm);
/* PCI device mapping and fixup routines.
* Called from the architecture pcibios init code.
* These are only available on SSB_EMBEDDED configurations. */
#ifdef CONFIG_SSB_EMBEDDED
int ssb_pcibios_plat_dev_init(struct pci_dev *dev);
int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
#endif /* CONFIG_SSB_EMBEDDED */
#endif /* LINUX_SSB_H_ */
#ifndef LINUX_SSB_DRIVER_GIGE_H_
#define LINUX_SSB_DRIVER_GIGE_H_
#include <linux/ssb/ssb.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#ifdef CONFIG_SSB_DRIVER_GIGE
#define SSB_GIGE_PCIIO 0x0000 /* PCI I/O Registers (1024 bytes) */
#define SSB_GIGE_RESERVED 0x0400 /* Reserved (1024 bytes) */
#define SSB_GIGE_PCICFG 0x0800 /* PCI config space (256 bytes) */
#define SSB_GIGE_SHIM_FLUSHSTAT 0x0C00 /* PCI to OCP: Flush status control (32bit) */
#define SSB_GIGE_SHIM_FLUSHRDA 0x0C04 /* PCI to OCP: Flush read address (32bit) */
#define SSB_GIGE_SHIM_FLUSHTO 0x0C08 /* PCI to OCP: Flush timeout counter (32bit) */
#define SSB_GIGE_SHIM_BARRIER 0x0C0C /* PCI to OCP: Barrier register (32bit) */
#define SSB_GIGE_SHIM_MAOCPSI 0x0C10 /* PCI to OCP: MaocpSI Control (32bit) */
#define SSB_GIGE_SHIM_SIOCPMA 0x0C14 /* PCI to OCP: SiocpMa Control (32bit) */
/* TM Status High flags */
#define SSB_GIGE_TMSHIGH_RGMII 0x00010000 /* Have an RGMII PHY-bus */
/* TM Status Low flags */
#define SSB_GIGE_TMSLOW_TXBYPASS 0x00080000 /* TX bypass (no delay) */
#define SSB_GIGE_TMSLOW_RXBYPASS 0x00100000 /* RX bypass (no delay) */
#define SSB_GIGE_TMSLOW_DLLEN 0x01000000 /* Enable DLL controls */
/* Boardflags (low) */
#define SSB_GIGE_BFL_ROBOSWITCH 0x0010
#define SSB_GIGE_MEM_RES_NAME "SSB Broadcom 47xx GigE memory"
#define SSB_GIGE_IO_RES_NAME "SSB Broadcom 47xx GigE I/O"
struct ssb_gige {
struct ssb_device *dev;
spinlock_t lock;
/* True, if the device has an RGMII bus.
* False, if the device has a GMII bus. */
bool has_rgmii;
/* The PCI controller device. */
struct pci_controller pci_controller;
struct pci_ops pci_ops;
struct resource mem_resource;
struct resource io_resource;
};
/* Check whether a PCI device is a SSB Gigabit Ethernet core. */
extern bool pdev_is_ssb_gige_core(struct pci_dev *pdev);
/* Convert a pci_dev pointer to a ssb_gige pointer. */
static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
{
if (!pdev_is_ssb_gige_core(pdev))
return NULL;
return container_of(pdev->bus->ops, struct ssb_gige, pci_ops);
}
/* Returns whether the PHY is connected by an RGMII bus. */
static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
{
struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
return (dev ? dev->has_rgmii : 0);
}
/* Returns whether we have a Roboswitch. */
static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
{
struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
if (dev)
return !!(dev->dev->bus->sprom.boardflags_lo &
SSB_GIGE_BFL_ROBOSWITCH);
return 0;
}
/* Returns whether we can only do one DMA at once. */
static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
{
struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
if (dev)
return ((dev->dev->bus->chip_id == 0x4785) &&
(dev->dev->bus->chip_rev < 2));
return 0;
}
/* Returns whether we must flush posted writes. */
static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
{
struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
if (dev)
return (dev->dev->bus->chip_id == 0x4785);
return 0;
}
extern char * nvram_get(const char *name);
/* Get the device MAC address */
static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
{
#ifdef CONFIG_BCM947XX
char *res = nvram_get("et0macaddr");
if (res)
memcpy(macaddr, res, 6);
#endif
}
extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
struct pci_dev *pdev);
extern int ssb_gige_map_irq(struct ssb_device *sdev,
const struct pci_dev *pdev);
/* The GigE driver is not a standalone module, because we don't have support
* for unregistering the driver. So we could not unload the module anyway. */
extern int ssb_gige_init(void);
static inline void ssb_gige_exit(void)
{
/* Currently we can not unregister the GigE driver,
* because we can not unregister the PCI bridge. */
BUG();
}
#else /* CONFIG_SSB_DRIVER_GIGE */
/* Gigabit Ethernet driver disabled */
static inline int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
struct pci_dev *pdev)
{
return -ENOSYS;
}
static inline int ssb_gige_map_irq(struct ssb_device *sdev,
const struct pci_dev *pdev)
{
return -ENOSYS;
}
static inline int ssb_gige_init(void)
{
return 0;
}
static inline void ssb_gige_exit(void)
{
}
static inline bool pdev_is_ssb_gige_core(struct pci_dev *pdev)
{
return 0;
}
static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
{
return NULL;
}
static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
{
return 0;
}
static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
{
return 0;
}
static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
{
return 0;
}
static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
{
return 0;
}
#endif /* CONFIG_SSB_DRIVER_GIGE */
#endif /* LINUX_SSB_DRIVER_GIGE_H_ */
#ifndef LINUX_SSB_PCICORE_H_
#define LINUX_SSB_PCICORE_H_
#include <linux/types.h>
struct pci_dev;
#ifdef CONFIG_SSB_DRIVER_PCICORE
/* PCI core registers. */
......@@ -88,6 +93,9 @@ extern void ssb_pcicore_init(struct ssb_pcicore *pc);
extern int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
struct ssb_device *dev);
int ssb_pcicore_plat_dev_init(struct pci_dev *d);
int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
#else /* CONFIG_SSB_DRIVER_PCICORE */
......@@ -107,5 +115,16 @@ int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
return 0;
}
static inline
int ssb_pcicore_plat_dev_init(struct pci_dev *d)
{
return -ENODEV;
}
static inline
int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
return -ENODEV;
}
#endif /* CONFIG_SSB_DRIVER_PCICORE */
#endif /* LINUX_SSB_PCICORE_H_ */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册