提交 a8d4211f 编写于 作者: G Greg Kroah-Hartman

USB: remove the berry_charge driver

The Barry project's userspace program, bcharge, can better handle this
device and functionality, and it also works with the latest phones,
which this driver does not support.  So remove it, as the userspace code
should be used instead.

Cc: Chris Frey <cdfrey@foursquare.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 2a9d0083
......@@ -87,17 +87,6 @@ config USB_LCD
To compile this driver as a module, choose M here: the
module will be called usblcd.
config USB_BERRY_CHARGE
tristate "USB BlackBerry recharge support"
depends on USB
help
Say Y here if you want to connect a BlackBerry device to your
computer's USB port and have it automatically switch to "recharge"
mode.
To compile this driver as a module, choose M here: the
module will be called berry_charge.
config USB_LED
tristate "USB LED driver support"
depends on USB
......
......@@ -5,7 +5,6 @@
obj-$(CONFIG_USB_ADUTUX) += adutux.o
obj-$(CONFIG_USB_APPLEDISPLAY) += appledisplay.o
obj-$(CONFIG_USB_BERRY_CHARGE) += berry_charge.o
obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o
obj-$(CONFIG_USB_CYTHERM) += cytherm.o
obj-$(CONFIG_USB_EMI26) += emi26.o
......
/*
* USB BlackBerry charging module
*
* Copyright (C) 2007 Greg Kroah-Hartman <gregkh@suse.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2.
*
* Information on how to switch configs was taken by the bcharge.cc file
* created by the barry.sf.net project.
*
* bcharge.cc has the following copyright:
* Copyright (C) 2006, Net Direct Inc. (http://www.netdirect.ca/)
* and is released under the GPLv2.
*
*
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/usb.h>
#define RIM_VENDOR 0x0fca
#define BLACKBERRY 0x0001
#define BLACKBERRY_PEARL_DUAL 0x0004
#define BLACKBERRY_PEARL 0x0006
static int debug;
static int pearl_dual_mode = 1;
#ifdef dbg
#undef dbg
#endif
#define dbg(dev, format, arg...) \
if (debug) \
dev_printk(KERN_DEBUG , dev , format , ## arg)
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(RIM_VENDOR, BLACKBERRY) },
{ USB_DEVICE(RIM_VENDOR, BLACKBERRY_PEARL) },
{ USB_DEVICE(RIM_VENDOR, BLACKBERRY_PEARL_DUAL) },
{ }, /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table);
static int magic_charge(struct usb_device *udev)
{
char *dummy_buffer = kzalloc(2, GFP_KERNEL);
int retval;
if (!dummy_buffer)
return -ENOMEM;
/* send two magic commands and then set the configuration. The device
* will then reset itself with the new power usage and should start
* charging. */
/* Note, with testing, it only seems that the first message is really
* needed (at least for the 8700c), but to be safe, we emulate what
* other operating systems seem to be sending to their device. We
* really need to get some specs for this device to be sure about what
* is going on here.
*/
dbg(&udev->dev, "Sending first magic command\n");
retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0xa5, 0xc0, 0, 1, dummy_buffer, 2, 100);
if (retval != 2) {
dev_err(&udev->dev, "First magic command failed: %d.\n",
retval);
goto exit;
}
dbg(&udev->dev, "Sending second magic command\n");
retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0xa2, 0x40, 0, 1, dummy_buffer, 0, 100);
if (retval != 0) {
dev_err(&udev->dev, "Second magic command failed: %d.\n",
retval);
goto exit;
}
dbg(&udev->dev, "Calling set_configuration\n");
retval = usb_driver_set_configuration(udev, 1);
if (retval)
dev_err(&udev->dev, "Set Configuration failed :%d.\n", retval);
exit:
kfree(dummy_buffer);
return retval;
}
static int magic_dual_mode(struct usb_device *udev)
{
char *dummy_buffer = kzalloc(2, GFP_KERNEL);
int retval;
if (!dummy_buffer)
return -ENOMEM;
/* send magic command so that the Blackberry Pearl device exposes
* two interfaces: both the USB mass-storage one and one which can
* be used for database access. */
dbg(&udev->dev, "Sending magic pearl command\n");
retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0xa9, 0xc0, 1, 1, dummy_buffer, 2, 100);
dbg(&udev->dev, "Magic pearl command returned %d\n", retval);
dbg(&udev->dev, "Calling set_configuration\n");
retval = usb_driver_set_configuration(udev, 1);
if (retval)
dev_err(&udev->dev, "Set Configuration failed :%d.\n", retval);
kfree(dummy_buffer);
return retval;
}
static int berry_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(intf);
if (udev->bus_mA < 500) {
dbg(&udev->dev, "Not enough power to charge available\n");
return -ENODEV;
}
dbg(&udev->dev, "Power is set to %dmA\n",
udev->actconfig->desc.bMaxPower * 2);
/* check the power usage so we don't try to enable something that is
* already enabled */
if ((udev->actconfig->desc.bMaxPower * 2) == 500) {
dbg(&udev->dev, "device is already charging, power is "
"set to %dmA\n", udev->actconfig->desc.bMaxPower * 2);
return -ENODEV;
}
/* turn the power on */
magic_charge(udev);
if ((le16_to_cpu(udev->descriptor.idProduct) == BLACKBERRY_PEARL) &&
(pearl_dual_mode))
magic_dual_mode(udev);
/* we don't really want to bind to the device, userspace programs can
* handle the syncing just fine, so get outta here. */
return -ENODEV;
}
static void berry_disconnect(struct usb_interface *intf)
{
}
static struct usb_driver berry_driver = {
.name = "berry_charge",
.probe = berry_probe,
.disconnect = berry_disconnect,
.id_table = id_table,
};
static int __init berry_init(void)
{
return usb_register(&berry_driver);
}
static void __exit berry_exit(void)
{
usb_deregister(&berry_driver);
}
module_init(berry_init);
module_exit(berry_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@suse.de>");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
module_param(pearl_dual_mode, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(pearl_dual_mode, "Change Blackberry Pearl to run in dual mode");
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册