提交 a6f402e4 编写于 作者: S Saeed Mahameed

net/mlx5e: Tx, no inline copy on ConnectX-5

ConnectX-5 and later HW generations will report min inline mode ==
MLX5_INLINE_MODE_NONE, which means driver is not required to copy packet
headers to inline fields of TX WQE.

When inline is not required, vlan insertion will be handled in the
TX descriptor rather than copy to inline.

For LSO case driver is still required to copy headers, for the HW to
duplicate on wire.

This will improve CPU utilization and boost TX performance.

Tested with pktgen burst single flow:
CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz
HCA: Mellanox Technologies MT28800 Family [ConnectX-5 Ex]

Before: 15.1Mpps
After:  17.2Mpps
Improvement: 14%
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
上级 2b31f7ae
......@@ -1029,9 +1029,7 @@ static int mlx5e_create_sq(struct mlx5e_channel *c,
sq->bf_buf_size = (1 << MLX5_CAP_GEN(mdev, log_bf_reg_size)) / 2;
sq->max_inline = param->max_inline;
sq->min_inline_mode =
MLX5_CAP_ETH(mdev, wqe_inline_mode) == MLX5_CAP_INLINE_MODE_VPORT_CONTEXT ?
param->min_inline_mode : 0;
sq->min_inline_mode = param->min_inline_mode;
err = mlx5e_alloc_sq_db(sq, cpu_to_node(c->cpu));
if (err)
......@@ -1095,7 +1093,10 @@ static int mlx5e_enable_sq(struct mlx5e_sq *sq, struct mlx5e_sq_param *param)
MLX5_SET(sqc, sqc, tis_num_0, param->type == MLX5E_SQ_ICO ?
0 : priv->tisn[sq->tc]);
MLX5_SET(sqc, sqc, cqn, sq->cq.mcq.cqn);
MLX5_SET(sqc, sqc, min_wqe_inline_mode, sq->min_inline_mode);
if (MLX5_CAP_ETH(mdev, wqe_inline_mode) == MLX5_CAP_INLINE_MODE_VPORT_CONTEXT)
MLX5_SET(sqc, sqc, min_wqe_inline_mode, sq->min_inline_mode);
MLX5_SET(sqc, sqc, state, MLX5_SQC_STATE_RST);
MLX5_SET(sqc, sqc, tis_lst_sz, param->type == MLX5E_SQ_ICO ? 0 : 1);
......@@ -3533,6 +3534,10 @@ static void mlx5e_build_nic_netdev_priv(struct mlx5_core_dev *mdev,
MLX5E_PARAMS_DEFAULT_TX_CQ_MODERATION_PKTS;
priv->params.tx_max_inline = mlx5e_get_max_inline_cap(mdev);
mlx5_query_min_inline(mdev, &priv->params.tx_min_inline_mode);
if (priv->params.tx_min_inline_mode == MLX5_INLINE_MODE_NONE &&
!MLX5_CAP_ETH(mdev, wqe_vlan_insert))
priv->params.tx_min_inline_mode = MLX5_INLINE_MODE_L2;
priv->params.num_tc = 1;
priv->params.rss_hfunc = ETH_RSS_HASH_XOR;
......
......@@ -154,6 +154,8 @@ static inline unsigned int mlx5e_calc_min_inline(enum mlx5_inline_modes mode,
int hlen;
switch (mode) {
case MLX5_INLINE_MODE_NONE:
return 0;
case MLX5_INLINE_MODE_TCP_UDP:
hlen = eth_get_headlen(skb->data, skb_headlen(skb));
if (hlen == ETH_HLEN && !skb_vlan_tag_present(skb))
......@@ -283,21 +285,23 @@ static netdev_tx_t mlx5e_sq_xmit(struct mlx5e_sq *sq, struct sk_buff *skb)
wi->num_bytes = num_bytes;
if (skb_vlan_tag_present(skb)) {
mlx5e_insert_vlan(eseg->inline_hdr.start, skb, ihs, &skb_data,
&skb_len);
ihs += VLAN_HLEN;
} else {
memcpy(eseg->inline_hdr.start, skb_data, ihs);
mlx5e_tx_skb_pull_inline(&skb_data, &skb_len, ihs);
ds_cnt = sizeof(*wqe) / MLX5_SEND_WQE_DS;
if (ihs) {
if (skb_vlan_tag_present(skb)) {
mlx5e_insert_vlan(eseg->inline_hdr.start, skb, ihs, &skb_data, &skb_len);
ihs += VLAN_HLEN;
} else {
memcpy(eseg->inline_hdr.start, skb_data, ihs);
mlx5e_tx_skb_pull_inline(&skb_data, &skb_len, ihs);
}
eseg->inline_hdr.sz = cpu_to_be16(ihs);
ds_cnt += DIV_ROUND_UP(ihs - sizeof(eseg->inline_hdr.start), MLX5_SEND_WQE_DS);
} else if (skb_vlan_tag_present(skb)) {
eseg->insert.type = cpu_to_be16(MLX5_ETH_WQE_INSERT_VLAN);
eseg->insert.vlan_tci = cpu_to_be16(skb_vlan_tag_get(skb));
}
eseg->inline_hdr.sz = cpu_to_be16(ihs);
ds_cnt = sizeof(*wqe) / MLX5_SEND_WQE_DS;
ds_cnt += DIV_ROUND_UP(ihs - sizeof(eseg->inline_hdr.start),
MLX5_SEND_WQE_DS);
dseg = (struct mlx5_wqe_data_seg *)cseg + ds_cnt;
dseg = (struct mlx5_wqe_data_seg *)cseg + ds_cnt;
wi->num_dma = 0;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册