提交 a168b8f1 编写于 作者: L Leonid Yegoshin 提交者: Markos Chandras

MIPS: mm: Add MIPS R6 instruction encodings

MIPS R6 defines new opcodes for ll, sc, cache and pref instructions
so we need to take these into consideration in the micro-assembler.
Signed-off-by: NLeonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
上级 51eec48e
......@@ -83,9 +83,12 @@ enum spec3_op {
swe_op = 0x1f, bshfl_op = 0x20,
swle_op = 0x21, swre_op = 0x22,
prefe_op = 0x23, dbshfl_op = 0x24,
lbue_op = 0x28, lhue_op = 0x29,
lbe_op = 0x2c, lhe_op = 0x2d,
lle_op = 0x2e, lwe_op = 0x2f,
cache6_op = 0x25, sc6_op = 0x26,
scd6_op = 0x27, lbue_op = 0x28,
lhue_op = 0x29, lbe_op = 0x2c,
lhe_op = 0x2d, lle_op = 0x2e,
lwe_op = 0x2f, pref6_op = 0x35,
ll6_op = 0x36, lld6_op = 0x37,
rdhwr_op = 0x3b
};
......
......@@ -38,6 +38,14 @@
| (e) << RE_SH \
| (f) << FUNC_SH)
/* This macro sets the non-variable bits of an R6 instruction. */
#define M6(a, b, c, d, e) \
((a) << OP_SH \
| (b) << RS_SH \
| (c) << RT_SH \
| (d) << SIMM9_SH \
| (e) << FUNC_SH)
/* Define these when we are not the ISA the kernel is being compiled with. */
#ifdef CONFIG_CPU_MICROMIPS
#define CL_uasm_i_b(buf, off) ISAOPC(_beq)(buf, 0, 0, off)
......@@ -62,7 +70,11 @@ static struct insn insn_table[] = {
{ insn_bltzl, M(bcond_op, 0, bltzl_op, 0, 0, 0), RS | BIMM },
{ insn_bltz, M(bcond_op, 0, bltz_op, 0, 0, 0), RS | BIMM },
{ insn_bne, M(bne_op, 0, 0, 0, 0, 0), RS | RT | BIMM },
#ifndef CONFIG_CPU_MIPSR6
{ insn_cache, M(cache_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
#else
{ insn_cache, M6(cache_op, 0, 0, 0, cache6_op), RS | RT | SIMM9 },
#endif
{ insn_daddiu, M(daddiu_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_daddu, M(spec_op, 0, 0, 0, 0, daddu_op), RS | RT | RD },
{ insn_dinsm, M(spec3_op, 0, 0, 0, 0, dinsm_op), RS | RT | RD | RE },
......@@ -85,13 +97,22 @@ static struct insn insn_table[] = {
{ insn_jal, M(jal_op, 0, 0, 0, 0, 0), JIMM },
{ insn_jalr, M(spec_op, 0, 0, 0, 0, jalr_op), RS | RD },
{ insn_j, M(j_op, 0, 0, 0, 0, 0), JIMM },
#ifndef CONFIG_CPU_MIPSR6
{ insn_jr, M(spec_op, 0, 0, 0, 0, jr_op), RS },
#else
{ insn_jr, M(spec_op, 0, 0, 0, 0, jalr_op), RS },
#endif
{ insn_lb, M(lb_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_ld, M(ld_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_ldx, M(spec3_op, 0, 0, 0, ldx_op, lx_op), RS | RT | RD },
{ insn_lh, M(lh_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
#ifndef CONFIG_CPU_MIPSR6
{ insn_lld, M(lld_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_ll, M(ll_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
#else
{ insn_lld, M6(spec3_op, 0, 0, 0, lld6_op), RS | RT | SIMM9 },
{ insn_ll, M6(spec3_op, 0, 0, 0, ll6_op), RS | RT | SIMM9 },
#endif
{ insn_lui, M(lui_op, 0, 0, 0, 0, 0), RT | SIMM },
{ insn_lw, M(lw_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_lwx, M(spec3_op, 0, 0, 0, lwx_op, lx_op), RS | RT | RD },
......@@ -104,11 +125,20 @@ static struct insn insn_table[] = {
{ insn_mul, M(spec2_op, 0, 0, 0, 0, mul_op), RS | RT | RD},
{ insn_ori, M(ori_op, 0, 0, 0, 0, 0), RS | RT | UIMM },
{ insn_or, M(spec_op, 0, 0, 0, 0, or_op), RS | RT | RD },
#ifndef CONFIG_CPU_MIPSR6
{ insn_pref, M(pref_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
#else
{ insn_pref, M6(spec3_op, 0, 0, 0, pref6_op), RS | RT | SIMM9 },
#endif
{ insn_rfe, M(cop0_op, cop_op, 0, 0, 0, rfe_op), 0 },
{ insn_rotr, M(spec_op, 1, 0, 0, 0, srl_op), RT | RD | RE },
#ifndef CONFIG_CPU_MIPSR6
{ insn_scd, M(scd_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_sc, M(sc_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
#else
{ insn_scd, M6(spec3_op, 0, 0, 0, scd6_op), RS | RT | SIMM9 },
{ insn_sc, M6(spec3_op, 0, 0, 0, sc6_op), RS | RT | SIMM9 },
#endif
{ insn_sd, M(sd_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_sll, M(spec_op, 0, 0, 0, 0, sll_op), RT | RD | RE },
{ insn_sllv, M(spec_op, 0, 0, 0, 0, sllv_op), RS | RT | RD },
......@@ -198,6 +228,8 @@ static void build_insn(u32 **buf, enum opcode opc, ...)
op |= build_set(va_arg(ap, u32));
if (ip->fields & SCIMM)
op |= build_scimm(va_arg(ap, u32));
if (ip->fields & SIMM9)
op |= build_scimm9(va_arg(ap, u32));
va_end(ap);
**buf = op;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册