提交 9b9bfded 编写于 作者: G Graf Yang 提交者: Mike Frysinger

Blackfin: convert SMP to only use generic time framework

Signed-off-by: NGraf Yang <graf.yang@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
上级 ffc4d8bc
......@@ -223,6 +223,7 @@ endchoice
config SMP
depends on BF561
select GENERIC_TIME
bool "Symmetric multi-processing support"
---help---
This enables support for systems with more than one CPU,
......
......@@ -24,14 +24,10 @@
static struct irqaction bfin_timer_irq = {
.name = "Blackfin Timer Tick",
#ifdef CONFIG_IRQ_PER_CPU
.flags = IRQF_DISABLED | IRQF_PERCPU,
#else
.flags = IRQF_DISABLED
#endif
};
#if defined(CONFIG_TICKSOURCE_GPTMR0) || defined(CONFIG_IPIPE)
#if defined(CONFIG_IPIPE)
void __init setup_system_timer0(void)
{
/* Power down the core timer, just to play safe. */
......@@ -74,7 +70,7 @@ void __init setup_core_timer(void)
static void __init
time_sched_init(irqreturn_t(*timer_routine) (int, void *))
{
#if defined(CONFIG_TICKSOURCE_GPTMR0) || defined(CONFIG_IPIPE)
#if defined(CONFIG_IPIPE)
setup_system_timer0();
bfin_timer_irq.handler = timer_routine;
setup_irq(IRQ_TIMER0, &bfin_timer_irq);
......@@ -94,7 +90,7 @@ static unsigned long gettimeoffset(void)
unsigned long offset;
unsigned long clocks_per_jiffy;
#if defined(CONFIG_TICKSOURCE_GPTMR0) || defined(CONFIG_IPIPE)
#if defined(CONFIG_IPIPE)
clocks_per_jiffy = bfin_read_TIMER0_PERIOD();
offset = bfin_read_TIMER0_COUNTER() / \
(((clocks_per_jiffy + 1) * HZ) / USEC_PER_SEC);
......@@ -133,36 +129,25 @@ irqreturn_t timer_interrupt(int irq, void *dummy)
static long last_rtc_update;
write_seqlock(&xtime_lock);
#if defined(CONFIG_TICKSOURCE_GPTMR0) && !defined(CONFIG_IPIPE)
do_timer(1);
/*
* TIMIL0 is latched in __ipipe_grab_irq() when the I-Pipe is
* enabled.
* If we have an externally synchronized Linux clock, then update
* CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
* called as close as possible to 500 ms before the new second starts.
*/
if (get_gptimer_status(0) & TIMER_STATUS_TIMIL0) {
#endif
do_timer(1);
/*
* If we have an externally synchronized Linux clock, then update
* CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
* called as close as possible to 500 ms before the new second starts.
*/
if (ntp_synced() &&
xtime.tv_sec > last_rtc_update + 660 &&
(xtime.tv_nsec / NSEC_PER_USEC) >=
500000 - ((unsigned)TICK_SIZE) / 2
&& (xtime.tv_nsec / NSEC_PER_USEC) <=
500000 + ((unsigned)TICK_SIZE) / 2) {
if (set_rtc_mmss(xtime.tv_sec) == 0)
last_rtc_update = xtime.tv_sec;
else
/* Do it again in 60s. */
last_rtc_update = xtime.tv_sec - 600;
}
#if defined(CONFIG_TICKSOURCE_GPTMR0) && !defined(CONFIG_IPIPE)
set_gptimer_status(0, TIMER_STATUS_TIMIL0);
if (ntp_synced() &&
xtime.tv_sec > last_rtc_update + 660 &&
(xtime.tv_nsec / NSEC_PER_USEC) >=
500000 - ((unsigned)TICK_SIZE) / 2
&& (xtime.tv_nsec / NSEC_PER_USEC) <=
500000 + ((unsigned)TICK_SIZE) / 2) {
if (set_rtc_mmss(xtime.tv_sec) == 0)
last_rtc_update = xtime.tv_sec;
else
/* Do it again in 60s. */
last_rtc_update = xtime.tv_sec - 600;
}
#endif
write_sequnlock(&xtime_lock);
#ifdef CONFIG_IPIPE
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册