提交 96a938aa 编写于 作者: D Dmitry Torokhov 提交者: Benson Leung

Input: atmel_mxt_ts - remove platform data support

Now that there are no users of custom Atmel platform data, and everyone
has switched to the generic device properties, we can remove support for
the platform data.
Acked-by: NNick Dyer <nick@shmanahar.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NBenson Leung <bleung@chromium.org>
上级 c0bb0608
......@@ -2394,7 +2394,6 @@ T: git git://github.com/ndyer/linux.git
S: Maintained
F: Documentation/devicetree/bindings/input/atmel,maxtouch.txt
F: drivers/input/touchscreen/atmel_mxt_ts.c
F: include/linux/platform_data/atmel_mxt_ts.h
ATMEL SAMA5D2 ADC DRIVER
M: Ludovic Desroches <ludovic.desroches@microchip.com>
......
......@@ -23,10 +23,10 @@
#include <linux/delay.h>
#include <linux/firmware.h>
#include <linux/i2c.h>
#include <linux/platform_data/atmel_mxt_ts.h>
#include <linux/input/mt.h>
#include <linux/interrupt.h>
#include <linux/of.h>
#include <linux/property.h>
#include <linux/slab.h>
#include <linux/gpio/consumer.h>
#include <linux/property.h>
......@@ -269,12 +269,16 @@ static const struct v4l2_file_operations mxt_video_fops = {
.poll = vb2_fop_poll,
};
enum mxt_suspend_mode {
MXT_SUSPEND_DEEP_SLEEP = 0,
MXT_SUSPEND_T9_CTRL = 1,
};
/* Each client has this additional data */
struct mxt_data {
struct i2c_client *client;
struct input_dev *input_dev;
char phys[64]; /* device physical location */
const struct mxt_platform_data *pdata;
struct mxt_object *object_table;
struct mxt_info info;
unsigned int irq;
......@@ -326,6 +330,9 @@ struct mxt_data {
/* for config update handling */
struct completion crc_completion;
u32 *t19_keymap;
unsigned int t19_num_keys;
enum mxt_suspend_mode suspend_mode;
};
......@@ -745,15 +752,14 @@ static int mxt_write_object(struct mxt_data *data,
static void mxt_input_button(struct mxt_data *data, u8 *message)
{
struct input_dev *input = data->input_dev;
const struct mxt_platform_data *pdata = data->pdata;
int i;
for (i = 0; i < pdata->t19_num_keys; i++) {
if (pdata->t19_keymap[i] == KEY_RESERVED)
for (i = 0; i < data->t19_num_keys; i++) {
if (data->t19_keymap[i] == KEY_RESERVED)
continue;
/* Active-low switch */
input_report_key(input, pdata->t19_keymap[i],
input_report_key(input, data->t19_keymap[i],
!(message[1] & BIT(i)));
}
}
......@@ -761,7 +767,7 @@ static void mxt_input_button(struct mxt_data *data, u8 *message)
static void mxt_input_sync(struct mxt_data *data)
{
input_mt_report_pointer_emulation(data->input_dev,
data->pdata->t19_num_keys);
data->t19_num_keys);
input_sync(data->input_dev);
}
......@@ -1861,7 +1867,6 @@ static void mxt_input_close(struct input_dev *dev);
static void mxt_set_up_as_touchpad(struct input_dev *input_dev,
struct mxt_data *data)
{
const struct mxt_platform_data *pdata = data->pdata;
int i;
input_dev->name = "Atmel maXTouch Touchpad";
......@@ -1875,15 +1880,14 @@ static void mxt_set_up_as_touchpad(struct input_dev *input_dev,
input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
MXT_PIXELS_PER_MM);
for (i = 0; i < pdata->t19_num_keys; i++)
if (pdata->t19_keymap[i] != KEY_RESERVED)
for (i = 0; i < data->t19_num_keys; i++)
if (data->t19_keymap[i] != KEY_RESERVED)
input_set_capability(input_dev, EV_KEY,
pdata->t19_keymap[i]);
data->t19_keymap[i]);
}
static int mxt_initialize_input_device(struct mxt_data *data)
{
const struct mxt_platform_data *pdata = data->pdata;
struct device *dev = &data->client->dev;
struct input_dev *input_dev;
int error;
......@@ -1949,7 +1953,7 @@ static int mxt_initialize_input_device(struct mxt_data *data)
}
/* If device has buttons we assume it is a touchpad */
if (pdata->t19_num_keys) {
if (data->t19_num_keys) {
mxt_set_up_as_touchpad(input_dev, data);
mt_flags |= INPUT_MT_POINTER;
} else {
......@@ -2923,51 +2927,42 @@ static void mxt_input_close(struct input_dev *dev)
mxt_stop(data);
}
static const struct mxt_platform_data *
mxt_parse_device_properties(struct i2c_client *client)
static int mxt_parse_device_properties(struct mxt_data *data)
{
static const char keymap_property[] = "linux,gpio-keymap";
struct mxt_platform_data *pdata;
struct device *dev = &data->client->dev;
u32 *keymap;
int n_keys;
int error;
pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return ERR_PTR(-ENOMEM);
if (device_property_present(&client->dev, keymap_property)) {
n_keys = device_property_read_u32_array(&client->dev,
keymap_property,
if (device_property_present(dev, keymap_property)) {
n_keys = device_property_read_u32_array(dev, keymap_property,
NULL, 0);
if (n_keys <= 0) {
error = n_keys < 0 ? n_keys : -EINVAL;
dev_err(&client->dev,
"invalid/malformed '%s' property: %d\n",
dev_err(dev, "invalid/malformed '%s' property: %d\n",
keymap_property, error);
return ERR_PTR(error);
return error;
}
keymap = devm_kmalloc_array(&client->dev, n_keys, sizeof(u32),
keymap = devm_kmalloc_array(dev, n_keys, sizeof(*keymap),
GFP_KERNEL);
if (!keymap)
return ERR_PTR(-ENOMEM);
return -ENOMEM;
error = device_property_read_u32_array(&client->dev,
keymap_property,
error = device_property_read_u32_array(dev, keymap_property,
keymap, n_keys);
if (error) {
dev_err(&client->dev,
"failed to parse '%s' property: %d\n",
dev_err(dev, "failed to parse '%s' property: %d\n",
keymap_property, error);
return ERR_PTR(error);
return error;
}
pdata->t19_keymap = keymap;
pdata->t19_num_keys = n_keys;
data->t19_keymap = keymap;
data->t19_num_keys = n_keys;
}
return pdata;
return 0;
}
#ifdef CONFIG_ACPI
......@@ -3050,25 +3045,12 @@ static const struct dmi_system_id mxt_dmi_table[] = {
{ }
};
static int mxt_acpi_probe(struct i2c_client *client)
static int mxt_prepare_acpi_properties(struct i2c_client *client)
{
struct acpi_device *adev;
const struct dmi_system_id *system_id;
const struct mxt_acpi_platform_data *acpi_pdata;
/*
* Ignore ACPI devices representing bootloader mode.
*
* This is a bit of a hack: Google Chromebook BIOS creates ACPI
* devices for both application and bootloader modes, but we are
* interested in application mode only (if device is in bootloader
* mode we'll end up switching into application anyway). So far
* application mode addresses were all above 0x40, so we'll use it
* as a threshold.
*/
if (client->addr < 0x40)
return -ENXIO;
adev = ACPI_COMPANION(&client->dev);
if (!adev)
return -ENOENT;
......@@ -3104,24 +3086,12 @@ static int mxt_acpi_probe(struct i2c_client *client)
return 0;
}
#else
static int mxt_acpi_probe(struct i2c_client *client)
static int mxt_prepare_acpi_properties(struct i2c_client *client)
{
return -ENOENT;
}
#endif
static const struct mxt_platform_data *
mxt_get_platform_data(struct i2c_client *client)
{
const struct mxt_platform_data *pdata;
pdata = dev_get_platdata(&client->dev);
if (pdata)
return pdata;
return mxt_parse_device_properties(client);
}
static const struct dmi_system_id chromebook_T9_suspend_dmi[] = {
{
.matches = {
......@@ -3140,16 +3110,20 @@ static const struct dmi_system_id chromebook_T9_suspend_dmi[] = {
static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct mxt_data *data;
const struct mxt_platform_data *pdata;
int error;
error = mxt_acpi_probe(client);
if (error && error != -ENOENT)
return error;
pdata = mxt_get_platform_data(client);
if (IS_ERR(pdata))
return PTR_ERR(pdata);
/*
* Ignore ACPI devices representing bootloader mode.
*
* This is a bit of a hack: Google Chromebook BIOS creates ACPI
* devices for both application and bootloader modes, but we are
* interested in application mode only (if device is in bootloader
* mode we'll end up switching into application anyway). So far
* application mode addresses were all above 0x40, so we'll use it
* as a threshold.
*/
if (ACPI_COMPANION(&client->dev) && client->addr < 0x40)
return -ENXIO;
data = devm_kzalloc(&client->dev, sizeof(struct mxt_data), GFP_KERNEL);
if (!data)
......@@ -3159,7 +3133,6 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
client->adapter->nr, client->addr);
data->client = client;
data->pdata = pdata;
data->irq = client->irq;
i2c_set_clientdata(client, data);
......@@ -3170,6 +3143,14 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
data->suspend_mode = dmi_check_system(chromebook_T9_suspend_dmi) ?
MXT_SUSPEND_T9_CTRL : MXT_SUSPEND_DEEP_SLEEP;
error = mxt_prepare_acpi_properties(client);
if (error && error != -ENOENT)
return error;
error = mxt_parse_device_properties(data);
if (error)
return error;
data->reset_gpio = devm_gpiod_get_optional(&client->dev,
"reset", GPIOD_OUT_LOW);
if (IS_ERR(data->reset_gpio)) {
......@@ -3179,8 +3160,7 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
}
error = devm_request_threaded_irq(&client->dev, client->irq,
NULL, mxt_interrupt,
pdata->irqflags | IRQF_ONESHOT,
NULL, mxt_interrupt, IRQF_ONESHOT,
client->name, data);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
......@@ -3300,7 +3280,7 @@ MODULE_DEVICE_TABLE(i2c, mxt_id);
static struct i2c_driver mxt_driver = {
.driver = {
.name = "atmel_mxt_ts",
.of_match_table = of_match_ptr(mxt_of_match),
.of_match_table = mxt_of_match,
.acpi_match_table = ACPI_PTR(mxt_acpi_id),
.pm = &mxt_pm_ops,
},
......
/*
* Atmel maXTouch Touchscreen driver
*
* Copyright (C) 2010 Samsung Electronics Co.Ltd
* Author: Joonyoung Shim <jy0922.shim@samsung.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef __LINUX_PLATFORM_DATA_ATMEL_MXT_TS_H
#define __LINUX_PLATFORM_DATA_ATMEL_MXT_TS_H
#include <linux/types.h>
enum mxt_suspend_mode {
MXT_SUSPEND_DEEP_SLEEP = 0,
MXT_SUSPEND_T9_CTRL = 1,
};
/* The platform data for the Atmel maXTouch touchscreen driver */
struct mxt_platform_data {
unsigned long irqflags;
u8 t19_num_keys;
const unsigned int *t19_keymap;
enum mxt_suspend_mode suspend_mode;
};
#endif /* __LINUX_PLATFORM_DATA_ATMEL_MXT_TS_H */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册