提交 9651b7db 编写于 作者: U Uwe Kleine-König

ARM: mx3: fix the last users of IMX_NEEDS_DEPRECATED_SYMBOLS

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
上级 be6786ac
......@@ -5,8 +5,6 @@
# Object file lists.
obj-y := mm.o devices.o cpu.o
CFLAGS_mm.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
obj-$(CONFIG_ARCH_MX31) += clock-imx31.o iomux-imx31.o
obj-$(CONFIG_ARCH_MX35) += clock-imx35.o
obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o
......@@ -15,7 +13,6 @@ obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o
obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o
obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o
obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o
CFLAGS_mach-mx31_3ds.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \
mx31moboard-marxbot.o mx31moboard-smartbot.o
obj-$(CONFIG_MACH_QONG) += mach-qong.o
......
......@@ -33,18 +33,18 @@
static struct mxc_gpio_port imx_gpio_ports[] = {
{
.chip.label = "gpio-0",
.base = IO_ADDRESS(GPIO1_BASE_ADDR),
.irq = MXC_INT_GPIO1,
.base = MX31_IO_ADDRESS(MX31_GPIO1_BASE_ADDR),
.irq = MX3x_INT_GPIO1,
.virtual_irq_start = MXC_GPIO_IRQ_START,
}, {
.chip.label = "gpio-1",
.base = IO_ADDRESS(GPIO2_BASE_ADDR),
.irq = MXC_INT_GPIO2,
.base = MX31_IO_ADDRESS(MX31_GPIO2_BASE_ADDR),
.irq = MX3x_INT_GPIO2,
.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
}, {
.chip.label = "gpio-2",
.base = IO_ADDRESS(GPIO3_BASE_ADDR),
.irq = MXC_INT_GPIO3,
.base = MX31_IO_ADDRESS(MX31_GPIO3_BASE_ADDR),
.irq = MX3x_INT_GPIO3,
.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
}
};
......@@ -56,8 +56,8 @@ int __init imx3x_register_gpios(void)
static struct resource mxc_w1_master_resources[] = {
{
.start = OWIRE_BASE_ADDR,
.end = OWIRE_BASE_ADDR + SZ_4K - 1,
.start = MX3x_OWIRE_BASE_ADDR,
.end = MX3x_OWIRE_BASE_ADDR + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
......@@ -110,8 +110,8 @@ struct platform_device mxcsdhc_device1 = {
static struct resource rnga_resources[] = {
{
.start = RNGA_BASE_ADDR,
.end = RNGA_BASE_ADDR + 0x28,
.start = MX3x_RNGA_BASE_ADDR,
.end = MX3x_RNGA_BASE_ADDR + 0x28,
.flags = IORESOURCE_MEM,
},
};
......@@ -129,20 +129,20 @@ struct platform_device mxc_rnga_device = {
/* The resource order is important! */
static struct resource mx3_ipu_rsrc[] = {
{
.start = IPU_CTRL_BASE_ADDR,
.end = IPU_CTRL_BASE_ADDR + 0x5F,
.start = MX3x_IPU_CTRL_BASE_ADDR,
.end = MX3x_IPU_CTRL_BASE_ADDR + 0x5F,
.flags = IORESOURCE_MEM,
}, {
.start = IPU_CTRL_BASE_ADDR + 0x88,
.end = IPU_CTRL_BASE_ADDR + 0xB3,
.start = MX3x_IPU_CTRL_BASE_ADDR + 0x88,
.end = MX3x_IPU_CTRL_BASE_ADDR + 0xB3,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_IPU_SYN,
.end = MXC_INT_IPU_SYN,
.start = MX3x_INT_IPU_SYN,
.end = MX3x_INT_IPU_SYN,
.flags = IORESOURCE_IRQ,
}, {
.start = MXC_INT_IPU_ERR,
.end = MXC_INT_IPU_ERR,
.start = MX3x_INT_IPU_ERR,
.end = MX3x_INT_IPU_ERR,
.flags = IORESOURCE_IRQ,
},
};
......@@ -156,8 +156,8 @@ struct platform_device mx3_ipu = {
static struct resource fb_resources[] = {
{
.start = IPU_CTRL_BASE_ADDR + 0xB4,
.end = IPU_CTRL_BASE_ADDR + 0x1BF,
.start = MX3x_IPU_CTRL_BASE_ADDR + 0xB4,
.end = MX3x_IPU_CTRL_BASE_ADDR + 0x1BF,
.flags = IORESOURCE_MEM,
},
};
......@@ -174,8 +174,8 @@ struct platform_device mx3_fb = {
static struct resource camera_resources[] = {
{
.start = IPU_CTRL_BASE_ADDR + 0x60,
.end = IPU_CTRL_BASE_ADDR + 0x87,
.start = MX3x_IPU_CTRL_BASE_ADDR + 0x60,
.end = MX3x_IPU_CTRL_BASE_ADDR + 0x87,
.flags = IORESOURCE_MEM,
},
};
......@@ -196,8 +196,8 @@ static struct resource otg_resources[] = {
.end = MX31_OTG_BASE_ADDR + 0x1ff,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_USB3,
.end = MXC_INT_USB3,
.start = MX31_INT_USB3,
.end = MX31_INT_USB3,
.flags = IORESOURCE_IRQ,
},
};
......@@ -238,8 +238,8 @@ static struct resource mxc_usbh1_resources[] = {
.end = MX31_OTG_BASE_ADDR + 0x3ff,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_USB1,
.end = MXC_INT_USB1,
.start = MX31_INT_USB1,
.end = MX31_INT_USB1,
.flags = IORESOURCE_IRQ,
},
};
......@@ -255,6 +255,7 @@ struct platform_device mxc_usbh1 = {
.num_resources = ARRAY_SIZE(mxc_usbh1_resources),
};
#ifdef CONFIG_ARCH_MX31
/* USB host 2 */
static u64 usbh2_dmamask = ~(u32)0;
......@@ -264,8 +265,8 @@ static struct resource mxc_usbh2_resources[] = {
.end = MX31_OTG_BASE_ADDR + 0x5ff,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_USB2,
.end = MXC_INT_USB2,
.start = MX31_INT_USB2,
.end = MX31_INT_USB2,
.flags = IORESOURCE_IRQ,
},
};
......@@ -280,6 +281,7 @@ struct platform_device mxc_usbh2 = {
.resource = mxc_usbh2_resources,
.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
};
#endif
static struct resource imx_wdt_resources[] = {
{
......@@ -343,14 +345,17 @@ static int __init mx3_devices_init(void)
#endif
#if defined(CONFIG_ARCH_MX35)
if (cpu_is_mx35()) {
imx_gpio_ports[0].base = MX35_IO_ADDRESS(MX35_GPIO1_BASE_ADDR),
imx_gpio_ports[1].base = MX35_IO_ADDRESS(MX35_GPIO2_BASE_ADDR),
imx_gpio_ports[2].base = MX35_IO_ADDRESS(MX35_GPIO3_BASE_ADDR),
otg_resources[0].start = MX35_OTG_BASE_ADDR;
otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
otg_resources[1].start = MXC_INT_USBOTG;
otg_resources[1].end = MXC_INT_USBOTG;
otg_resources[1].start = MX35_INT_USBOTG;
otg_resources[1].end = MX35_INT_USBOTG;
mxc_usbh1_resources[0].start = MX35_OTG_BASE_ADDR + 0x400;
mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff;
mxc_usbh1_resources[1].start = MXC_INT_USBHS;
mxc_usbh1_resources[1].end = MXC_INT_USBHS;
mxc_usbh1_resources[1].start = MX35_INT_USBHS;
mxc_usbh1_resources[1].end = MX35_INT_USBHS;
imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR;
imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff;
}
......
......@@ -42,29 +42,29 @@
*/
static struct map_desc mxc_io_desc[] __initdata = {
{
.virtual = X_MEMC_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(X_MEMC_BASE_ADDR),
.length = X_MEMC_SIZE,
.type = MT_DEVICE
.virtual = MX3x_X_MEMC_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX3x_X_MEMC_BASE_ADDR),
.length = MX3x_X_MEMC_SIZE,
.type = MT_DEVICE
}, {
.virtual = AVIC_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(AVIC_BASE_ADDR),
.length = AVIC_SIZE,
.type = MT_DEVICE_NONSHARED
.virtual = MX3x_AVIC_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX3x_AVIC_BASE_ADDR),
.length = MX3x_AVIC_SIZE,
.type = MT_DEVICE_NONSHARED
}, {
.virtual = AIPS1_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
.length = AIPS1_SIZE,
.type = MT_DEVICE_NONSHARED
.virtual = MX3x_AIPS1_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX3x_AIPS1_BASE_ADDR),
.length = MX3x_AIPS1_SIZE,
.type = MT_DEVICE_NONSHARED
}, {
.virtual = AIPS2_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
.length = AIPS2_SIZE,
.type = MT_DEVICE_NONSHARED
.virtual = MX3x_AIPS2_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX3x_AIPS2_BASE_ADDR),
.length = MX3x_AIPS2_SIZE,
.type = MT_DEVICE_NONSHARED
}, {
.virtual = SPBA0_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
.length = SPBA0_SIZE,
.virtual = MX3x_SPBA0_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX3x_SPBA0_BASE_ADDR),
.length = MX3x_SPBA0_SIZE,
.type = MT_DEVICE_NONSHARED
},
};
......@@ -77,7 +77,7 @@ static struct map_desc mxc_io_desc[] __initdata = {
void __init mx31_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX31);
mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
......@@ -86,8 +86,8 @@ void __init mx31_map_io(void)
void __init mx35_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX35);
mxc_iomux_v3_init(IO_ADDRESS(IOMUXC_BASE_ADDR));
mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX35_IO_ADDRESS(MX3x_WDOG_BASE_ADDR));
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
......@@ -97,7 +97,7 @@ int imx3x_register_gpios(void);
void __init mx31_init_irq(void)
{
mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
mxc_init_irq(MX31_IO_ADDRESS(MX3x_AVIC_BASE_ADDR));
imx3x_register_gpios();
}
......@@ -129,7 +129,7 @@ static int mxc_init_l2x0(void)
pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
}
l2x0_base = ioremap(L2CC_BASE_ADDR, 4096);
l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
if (IS_ERR(l2x0_base)) {
printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
PTR_ERR(l2x0_base));
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册