thermal: max77620: Add DT binding doc for thermal driver

Maxim Semiconductor MAX77620 supports alarm interrupts when
its die temperature crosses 120C and 140C. These threshold
temperatures are not configurable.

Add DT binding document to details out the DT property related
to MAX77620 thermal functionality.
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>

Documentation/devicetree/bindings/thermal/max77620_thermal.txt

+Thermal driver for MAX77620 Power management IC from Maxim Semiconductor.
+
+Maxim Semiconductor MAX77620 supports alarm interrupts when its
+die temperature crosses 120C and 140C. These threshold temperatures
+are not configurable. Device does not provide the real temperature
+of die other than just indicating whether temperature is above or
+below threshold level.
+
+Required properties:
+-------------------
+#thermal-sensor-cells:	Please refer <devicetree/bindings/thermal/thermal.txt>
+			for more details.
+			The value must be 0.
+
+For more details, please refer generic thermal DT binding document
+<devicetree/bindings/thermal/thermal.txt>.
+
+Please refer <devicetree/bindings/mfd/max77620.txt> for mfd DT binding
+document for the MAX77620.
+
+Example:
+--------
+#include <dt-bindings/mfd/max77620.h>
+#include <dt-bindings/thermal/thermal.h>
+...
+
+i2c@7000d000 {
+	spmic: max77620@3c {
+		compatible = "maxim,max77620";
+		:::::
+		#thermal-sensor-cells = <0>;
+		:::
+	};
+};
+
+cool_dev: cool-dev {
+	compatible = "cooling-dev";
+	#cooling-cells = <2>;
+};
+
+thermal-zones {
+	PMIC-Die {
+		polling-delay = <0>;
+		polling-delay-passive = <0>;
+		thermal-sensors = <&spmic>;
+
+		trips {
+			pmic_die_warn_temp_thresh: hot-die {
+				temperature = <120000>;
+				type = "hot";
+				hysteresis = <0>;
+			};
+
+			pmic_die_cirt_temp_thresh: cirtical-die {
+				temperature = <140000>;
+				type = "critical";
+				hysteresis = <0>;
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&pmic_die_warn_temp_thresh>;
+				cooling-device = <&cool_dev THERMAL_NO_LIMIT
+						  THERMAL_NO_LIMIT>;
+				contribution = <100>;
+			};
+		};
+	};
+};