提交 8fa7fd74 编写于 作者: M Michal Nazarewicz 提交者: Greg Kroah-Hartman

USB: storage: Use USB_ prefix instead of US_ prefix

This commit changes prefix for some of the USB mass storage
class related macros (ie. USB_SC_ for subclass and USB_PR_
for class).
Signed-off-by: NMichal Nazarewicz <mina86@mina86.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 1992de83
......@@ -396,7 +396,7 @@ static int ub_probe_lun(struct ub_dev *sc, int lnum);
#else
static const struct usb_device_id ub_usb_ids[] = {
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_BULK) },
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) },
{ }
};
......
......@@ -113,7 +113,7 @@ static int slave_alloc (struct scsi_device *sdev)
* Let the scanning code know if this target merely sets
* Peripheral Device Type to 0x1f to indicate no LUN.
*/
if (us->subclass == US_SC_UFI)
if (us->subclass == USB_SC_UFI)
sdev->sdev_target->pdt_1f_for_no_lun = 1;
return 0;
......@@ -176,7 +176,7 @@ static int slave_configure(struct scsi_device *sdev)
/* Disk-type devices use MODE SENSE(6) if the protocol
* (SubClass) is Transparent SCSI, otherwise they use
* MODE SENSE(10). */
if (us->subclass != US_SC_SCSI && us->subclass != US_SC_CYP_ATACB)
if (us->subclass != USB_SC_SCSI && us->subclass != USB_SC_CYP_ATACB)
sdev->use_10_for_ms = 1;
/* Many disks only accept MODE SENSE transfer lengths of
......@@ -245,7 +245,7 @@ static int slave_configure(struct scsi_device *sdev)
* capacity will be decremented or is correct. */
if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK |
US_FL_SCM_MULT_TARG)) &&
us->protocol == US_PR_BULK)
us->protocol == USB_PR_BULK)
us->use_last_sector_hacks = 1;
} else {
......@@ -261,7 +261,7 @@ static int slave_configure(struct scsi_device *sdev)
* scsi_level == 0 (UNKNOWN). Hence such devices must necessarily
* be single-LUN.
*/
if ((us->protocol == US_PR_CB || us->protocol == US_PR_CBI) &&
if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_CBI) &&
sdev->scsi_level == SCSI_UNKNOWN)
us->max_lun = 0;
......
......@@ -1760,7 +1760,7 @@ static int sddr09_probe(struct usb_interface *intf,
if (result)
return result;
if (us->protocol == US_PR_DPCM_USB) {
if (us->protocol == USB_PR_DPCM_USB) {
us->transport_name = "Control/Bulk-EUSB/SDDR09";
us->transport = dpcm_transport;
us->transport_reset = usb_stor_CB_reset;
......
......@@ -642,7 +642,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
* unless the operation involved a data-in transfer. Devices
* can signal most data-in errors by stalling the bulk-in pipe.
*/
if ((us->protocol == US_PR_CB || us->protocol == US_PR_DPCM_USB) &&
if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_DPCM_USB) &&
srb->sc_data_direction != DMA_FROM_DEVICE) {
US_DEBUGP("-- CB transport device requiring auto-sense\n");
need_auto_sense = 1;
......@@ -701,8 +701,8 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sense_size);
/* FIXME: we must do the protocol translation here */
if (us->subclass == US_SC_RBC || us->subclass == US_SC_SCSI ||
us->subclass == US_SC_CYP_ATACB)
if (us->subclass == USB_SC_RBC || us->subclass == USB_SC_SCSI ||
us->subclass == USB_SC_CYP_ATACB)
srb->cmd_len = 6;
else
srb->cmd_len = 12;
......@@ -926,7 +926,7 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
/* NOTE: CB does not have a status stage. Silly, I know. So
* we have to catch this at a higher level.
*/
if (us->protocol != US_PR_CBI)
if (us->protocol != USB_PR_CBI)
return USB_STOR_TRANSPORT_GOOD;
result = usb_stor_intr_transfer(us, us->iobuf, 2);
......@@ -942,7 +942,7 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
* that this means we could be ignoring a real error on these
* commands, but that can't be helped.
*/
if (us->subclass == US_SC_UFI) {
if (us->subclass == USB_SC_UFI) {
if (srb->cmnd[0] == REQUEST_SENSE ||
srb->cmnd[0] == INQUIRY)
return USB_STOR_TRANSPORT_GOOD;
......
......@@ -21,11 +21,11 @@
UNUSUAL_DEV( 0x0584, 0x0008, 0x0102, 0x0102,
"Fujifilm",
"DPC-R1 (Alauda)",
US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0),
USB_SC_SCSI, USB_PR_ALAUDA, init_alauda, 0),
UNUSUAL_DEV( 0x07b4, 0x010a, 0x0102, 0x0102,
"Olympus",
"MAUSB-10 (Alauda)",
US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0),
USB_SC_SCSI, USB_PR_ALAUDA, init_alauda, 0),
#endif /* defined(CONFIG_USB_STORAGE_ALAUDA) || ... */
......@@ -23,12 +23,12 @@
UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999,
"Cypress",
"Cypress AT2LP",
US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0),
USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
/* CY7C68310 : support atacb and atacb2 */
UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999,
"Cypress",
"Cypress ISD-300LP",
US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0),
USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
#endif /* defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || ... */
......@@ -21,7 +21,7 @@
UNUSUAL_DEV( 0x07c4, 0xa000, 0x0000, 0x0015,
"Datafab",
"MDCFE-B USB CF Reader",
US_SC_SCSI, US_PR_DATAFAB, NULL,
USB_SC_SCSI, USB_PR_DATAFAB, NULL,
0),
/*
......@@ -38,45 +38,45 @@ UNUSUAL_DEV( 0x07c4, 0xa000, 0x0000, 0x0015,
UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff,
"SIIG/Datafab",
"SIIG/Datafab Memory Stick+CF Reader/Writer",
US_SC_SCSI, US_PR_DATAFAB, NULL,
USB_SC_SCSI, USB_PR_DATAFAB, NULL,
0),
/* Reported by Josef Reisinger <josef.reisinger@netcologne.de> */
UNUSUAL_DEV( 0x07c4, 0xa002, 0x0000, 0xffff,
"Datafab/Unknown",
"MD2/MD3 Disk enclosure",
US_SC_SCSI, US_PR_DATAFAB, NULL,
USB_SC_SCSI, USB_PR_DATAFAB, NULL,
US_FL_SINGLE_LUN),
UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff,
"Datafab/Unknown",
"Datafab-based Reader",
US_SC_SCSI, US_PR_DATAFAB, NULL,
USB_SC_SCSI, USB_PR_DATAFAB, NULL,
0),
UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff,
"Datafab/Unknown",
"Datafab-based Reader",
US_SC_SCSI, US_PR_DATAFAB, NULL,
USB_SC_SCSI, USB_PR_DATAFAB, NULL,
0),
UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff,
"PNY/Datafab",
"PNY/Datafab CF+SM Reader",
US_SC_SCSI, US_PR_DATAFAB, NULL,
USB_SC_SCSI, USB_PR_DATAFAB, NULL,
0),
UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff,
"Simple Tech/Datafab",
"Simple Tech/Datafab CF+SM Reader",
US_SC_SCSI, US_PR_DATAFAB, NULL,
USB_SC_SCSI, USB_PR_DATAFAB, NULL,
0),
/* Submitted by Olaf Hering <olh@suse.de> */
UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff,
"Datafab Systems, Inc.",
"USB to CF + SM Combo (LC1)",
US_SC_SCSI, US_PR_DATAFAB, NULL,
USB_SC_SCSI, USB_PR_DATAFAB, NULL,
0),
/* Reported by Felix Moeller <felix@derklecks.de>
......@@ -86,13 +86,13 @@ UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff,
UNUSUAL_DEV( 0x07c4, 0xa10b, 0x0000, 0xffff,
"DataFab Systems Inc.",
"USB CF+MS",
US_SC_SCSI, US_PR_DATAFAB, NULL,
USB_SC_SCSI, USB_PR_DATAFAB, NULL,
0),
UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
"Acomdata",
"CF",
US_SC_SCSI, US_PR_DATAFAB, NULL,
USB_SC_SCSI, USB_PR_DATAFAB, NULL,
US_FL_SINGLE_LUN),
#endif /* defined(CONFIG_USB_STORAGE_DATAFAB) || ... */
此差异已折叠。
......@@ -21,6 +21,6 @@
UNUSUAL_DEV( 0x07ab, 0xfc01, 0x0000, 0x9999,
"Freecom",
"USB-IDE",
US_SC_QIC, US_PR_FREECOM, init_freecom, 0),
USB_SC_QIC, USB_PR_FREECOM, init_freecom, 0),
#endif /* defined(CONFIG_USB_STORAGE_FREECOM) || ... */
......@@ -21,37 +21,37 @@
UNUSUAL_DEV( 0x054c, 0x002b, 0x0100, 0x0110,
"Sony",
"Portable USB Harddrive V2",
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
0),
UNUSUAL_DEV( 0x05ab, 0x0031, 0x0100, 0x0110,
"In-System",
"USB/IDE Bridge (ATA/ATAPI)",
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
0),
UNUSUAL_DEV( 0x05ab, 0x0301, 0x0100, 0x0110,
"In-System",
"Portable USB Harddrive V2",
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
0),
UNUSUAL_DEV( 0x05ab, 0x0351, 0x0100, 0x0110,
"In-System",
"Portable USB Harddrive V2",
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
0),
UNUSUAL_DEV( 0x05ab, 0x5701, 0x0100, 0x0110,
"In-System",
"USB Storage Adapter V2",
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
0),
UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110,
"ATI",
"USB Cable 205",
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
0),
#endif /* defined(CONFIG_USB_STORAGE_ISD200) || ... */
......@@ -21,7 +21,7 @@
UNUSUAL_DEV( 0x05dc, 0x0001, 0x0000, 0x0001,
"Lexar",
"Jumpshot USB CF Reader",
US_SC_SCSI, US_PR_JUMPSHOT, NULL,
USB_SC_SCSI, USB_PR_JUMPSHOT, NULL,
US_FL_NEED_OVERRIDE),
#endif /* defined(CONFIG_USB_STORAGE_JUMPSHOT) || ... */
......@@ -21,6 +21,6 @@
UNUSUAL_DEV( 0x045a, 0x5210, 0x0101, 0x0101,
"Rio",
"Rio Karma",
US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0),
USB_SC_SCSI, USB_PR_KARMA, rio_karma_init, 0),
#endif /* defined(CONFIG_USB_STORAGE_KARMA) || ... */
......@@ -24,13 +24,13 @@
UNUSUAL_DEV( 0x0d49, 0x7000, 0x0000, 0x9999,
"Maxtor",
"OneTouch External Harddrive",
US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
USB_SC_DEVICE, USB_PR_DEVICE, onetouch_connect_input,
0),
UNUSUAL_DEV( 0x0d49, 0x7010, 0x0000, 0x9999,
"Maxtor",
"OneTouch External Harddrive",
US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
USB_SC_DEVICE, USB_PR_DEVICE, onetouch_connect_input,
0),
#endif /* defined(CONFIG_USB_STORAGE_ONETOUCH) || ... */
......@@ -21,36 +21,36 @@
UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100,
"Microtech",
"CameraMate (DPCM_USB)",
US_SC_SCSI, US_PR_DPCM_USB, NULL, 0),
USB_SC_SCSI, USB_PR_DPCM_USB, NULL, 0),
UNUSUAL_DEV( 0x04e6, 0x0003, 0x0000, 0x9999,
"Sandisk",
"ImageMate SDDR09",
US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
USB_SC_SCSI, USB_PR_EUSB_SDDR09, usb_stor_sddr09_init,
0),
/* This entry is from Andries.Brouwer@cwi.nl */
UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208,
"SCM Microsystems",
"eUSB SmartMedia / CompactFlash Adapter",
US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
USB_SC_SCSI, USB_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
0),
UNUSUAL_DEV( 0x066b, 0x0105, 0x0100, 0x0100,
"Olympus",
"Camedia MAUSB-2",
US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
USB_SC_SCSI, USB_PR_EUSB_SDDR09, usb_stor_sddr09_init,
0),
UNUSUAL_DEV( 0x0781, 0x0200, 0x0000, 0x9999,
"Sandisk",
"ImageMate SDDR-09",
US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
USB_SC_SCSI, USB_PR_EUSB_SDDR09, usb_stor_sddr09_init,
0),
UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100,
"Microtech",
"CameraMate (DPCM_USB)",
US_SC_SCSI, US_PR_DPCM_USB, NULL, 0),
USB_SC_SCSI, USB_PR_DPCM_USB, NULL, 0),
#endif /* defined(CONFIG_USB_STORAGE_SDDR09) || ... */
......@@ -22,23 +22,23 @@
UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999,
"Datafab",
"MDSM-B reader",
US_SC_SCSI, US_PR_SDDR55, NULL,
USB_SC_SCSI, USB_PR_SDDR55, NULL,
US_FL_FIX_INQUIRY),
/* SM part - aeb <Andries.Brouwer@cwi.nl> */
UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff,
"Datafab Systems, Inc.",
"USB to CF + SM Combo (LC1)",
US_SC_SCSI, US_PR_SDDR55, NULL, 0),
USB_SC_SCSI, USB_PR_SDDR55, NULL, 0),
UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
"Acomdata",
"SM",
US_SC_SCSI, US_PR_SDDR55, NULL, 0),
USB_SC_SCSI, USB_PR_SDDR55, NULL, 0),
UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x9999,
"Sandisk",
"ImageMate SDDR55",
US_SC_SCSI, US_PR_SDDR55, NULL, 0),
USB_SC_SCSI, USB_PR_SDDR55, NULL, 0),
#endif /* defined(CONFIG_USB_STORAGE_SDDR55) || ... */
......@@ -21,23 +21,23 @@
UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001,
"HP",
"CD-Writer+ 8200e",
US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
USB_SC_8070, USB_PR_USBAT, init_usbat_cd, 0),
UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001,
"HP",
"CD-Writer+ CD-4e",
US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
USB_SC_8070, USB_PR_USBAT, init_usbat_cd, 0),
UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999,
"Shuttle/SCM",
"USBAT-02",
US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
USB_SC_SCSI, USB_PR_USBAT, init_usbat_flash,
US_FL_SINGLE_LUN),
UNUSUAL_DEV( 0x0781, 0x0005, 0x0005, 0x0005,
"Sandisk",
"ImageMate SDDR-05b",
US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
USB_SC_SCSI, USB_PR_USBAT, init_usbat_flash,
US_FL_SINGLE_LUN),
#endif /* defined(CONFIG_USB_STORAGE_USBAT) || ... */
......@@ -512,10 +512,10 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id,
/* Store the entries */
us->unusual_dev = unusual_dev;
us->subclass = (unusual_dev->useProtocol == US_SC_DEVICE) ?
us->subclass = (unusual_dev->useProtocol == USB_SC_DEVICE) ?
idesc->bInterfaceSubClass :
unusual_dev->useProtocol;
us->protocol = (unusual_dev->useTransport == US_PR_DEVICE) ?
us->protocol = (unusual_dev->useTransport == USB_PR_DEVICE) ?
idesc->bInterfaceProtocol :
unusual_dev->useTransport;
us->fflags = USB_US_ORIG_FLAGS(id->driver_info);
......@@ -552,10 +552,10 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id,
struct usb_device_descriptor *ddesc = &dev->descriptor;
int msg = -1;
if (unusual_dev->useProtocol != US_SC_DEVICE &&
if (unusual_dev->useProtocol != USB_SC_DEVICE &&
us->subclass == idesc->bInterfaceSubClass)
msg += 1;
if (unusual_dev->useTransport != US_PR_DEVICE &&
if (unusual_dev->useTransport != USB_PR_DEVICE &&
us->protocol == idesc->bInterfaceProtocol)
msg += 2;
if (msg >= 0 && !(us->fflags & US_FL_NEED_OVERRIDE))
......@@ -582,21 +582,21 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id,
static void get_transport(struct us_data *us)
{
switch (us->protocol) {
case US_PR_CB:
case USB_PR_CB:
us->transport_name = "Control/Bulk";
us->transport = usb_stor_CB_transport;
us->transport_reset = usb_stor_CB_reset;
us->max_lun = 7;
break;
case US_PR_CBI:
case USB_PR_CBI:
us->transport_name = "Control/Bulk/Interrupt";
us->transport = usb_stor_CB_transport;
us->transport_reset = usb_stor_CB_reset;
us->max_lun = 7;
break;
case US_PR_BULK:
case USB_PR_BULK:
us->transport_name = "Bulk";
us->transport = usb_stor_Bulk_transport;
us->transport_reset = usb_stor_Bulk_reset;
......@@ -608,35 +608,35 @@ static void get_transport(struct us_data *us)
static void get_protocol(struct us_data *us)
{
switch (us->subclass) {
case US_SC_RBC:
case USB_SC_RBC:
us->protocol_name = "Reduced Block Commands (RBC)";
us->proto_handler = usb_stor_transparent_scsi_command;
break;
case US_SC_8020:
case USB_SC_8020:
us->protocol_name = "8020i";
us->proto_handler = usb_stor_pad12_command;
us->max_lun = 0;
break;
case US_SC_QIC:
case USB_SC_QIC:
us->protocol_name = "QIC-157";
us->proto_handler = usb_stor_pad12_command;
us->max_lun = 0;
break;
case US_SC_8070:
case USB_SC_8070:
us->protocol_name = "8070i";
us->proto_handler = usb_stor_pad12_command;
us->max_lun = 0;
break;
case US_SC_SCSI:
case USB_SC_SCSI:
us->protocol_name = "Transparent SCSI";
us->proto_handler = usb_stor_transparent_scsi_command;
break;
case US_SC_UFI:
case USB_SC_UFI:
us->protocol_name = "Uniform Floppy Interface (UFI)";
us->proto_handler = usb_stor_ufi_command;
break;
......@@ -679,7 +679,7 @@ static int get_pipes(struct us_data *us)
}
}
if (!ep_in || !ep_out || (us->protocol == US_PR_CBI && !ep_int)) {
if (!ep_in || !ep_out || (us->protocol == USB_PR_CBI && !ep_int)) {
US_DEBUGP("Endpoint sanity check failed! Rejecting dev.\n");
return -EIO;
}
......@@ -834,7 +834,7 @@ static int usb_stor_scan_thread(void * __us)
if (!test_bit(US_FLIDX_DONT_SCAN, &us->dflags)) {
/* For bulk-only devices, determine the max LUN value */
if (us->protocol == US_PR_BULK &&
if (us->protocol == USB_PR_BULK &&
!(us->fflags & US_FL_SINGLE_LUN)) {
mutex_lock(&us->dev_mutex);
us->max_lun = usb_stor_Bulk_max_lun(us);
......
......@@ -81,35 +81,36 @@ enum { US_DO_ALL_FLAGS };
/* Sub Classes */
#define US_SC_RBC 0x01 /* Typically, flash devices */
#define US_SC_8020 0x02 /* CD-ROM */
#define US_SC_QIC 0x03 /* QIC-157 Tapes */
#define US_SC_UFI 0x04 /* Floppy */
#define US_SC_8070 0x05 /* Removable media */
#define US_SC_SCSI 0x06 /* Transparent */
#define US_SC_LOCKABLE 0x07 /* Password-protected */
#define US_SC_ISD200 0xf0 /* ISD200 ATA */
#define US_SC_CYP_ATACB 0xf1 /* Cypress ATACB */
#define US_SC_DEVICE 0xff /* Use device's value */
/* Protocols */
#define US_PR_CBI 0x00 /* Control/Bulk/Interrupt */
#define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */
#define US_PR_BULK 0x50 /* bulk only */
#define US_PR_USBAT 0x80 /* SCM-ATAPI bridge */
#define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */
#define US_PR_SDDR55 0x82 /* SDDR-55 (made up) */
#define US_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */
#define US_PR_FREECOM 0xf1 /* Freecom */
#define US_PR_DATAFAB 0xf2 /* Datafab chipsets */
#define US_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */
#define US_PR_ALAUDA 0xf4 /* Alauda chipsets */
#define US_PR_KARMA 0xf5 /* Rio Karma */
#define US_PR_DEVICE 0xff /* Use device's value */
#define USB_SC_RBC 0x01 /* Typically, flash devices */
#define USB_SC_8020 0x02 /* CD-ROM */
#define USB_SC_QIC 0x03 /* QIC-157 Tapes */
#define USB_SC_UFI 0x04 /* Floppy */
#define USB_SC_8070 0x05 /* Removable media */
#define USB_SC_SCSI 0x06 /* Transparent */
#define USB_SC_LOCKABLE 0x07 /* Password-protected */
#define USB_SC_ISD200 0xf0 /* ISD200 ATA */
#define USB_SC_CYP_ATACB 0xf1 /* Cypress ATACB */
#define USB_SC_DEVICE 0xff /* Use device's value */
/* Storage protocol codes */
#define USB_PR_CBI 0x00 /* Control/Bulk/Interrupt */
#define USB_PR_CB 0x01 /* Control/Bulk w/o interrupt */
#define USB_PR_BULK 0x50 /* bulk only */
#define USB_PR_UAS 0x62 /* USB Attached SCSI */
#define USB_PR_USBAT 0x80 /* SCM-ATAPI bridge */
#define USB_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */
#define USB_PR_SDDR55 0x82 /* SDDR-55 (made up) */
#define USB_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */
#define USB_PR_FREECOM 0xf1 /* Freecom */
#define USB_PR_DATAFAB 0xf2 /* Datafab chipsets */
#define USB_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */
#define USB_PR_ALAUDA 0xf4 /* Alauda chipsets */
#define USB_PR_KARMA 0xf5 /* Rio Karma */
#define USB_PR_DEVICE 0xff /* Use device's value */
/*
*/
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册