提交 8eba3651 编写于 作者: M Manuel Lauss 提交者: Ralf Baechle

MIPS: PCI: fix pcibios_map_irq section mismatch

Drop  the __init from pcibios_map_irq() to make this section mis-
match go away:

WARNING: vmlinux.o(.text+0x56acd4): Section mismatch in reference from the function pcibios_scanbus() to the function .init.text:pcibios_map_irq()
The function pcibios_scanbus() references
the function __init pcibios_map_irq().
This is often because pcibios_scanbus lacks a __init
annotation or the annotation of pcibios_map_irq is wrong.

Run-Tested only on Alchemy.
Signed-off-by: NManuel Lauss <manuel.lauss@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17267/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 c22c8043
......@@ -38,7 +38,7 @@ static char irq_tab_capcella[][5] __initdata = {
[14] = { -1, INTA, INTB, INTC, INTD }
};
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
return irq_tab_capcella[slot][pin];
}
......
......@@ -174,7 +174,7 @@ static char irq_tab_raq2[] __initdata = {
[COBALT_PCICONF_ETH1] = ETH1_IRQ
};
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
if (cobalt_board_id <= COBALT_BRD_ID_QUBE1)
return irq_tab_qube1[slot];
......
......@@ -85,7 +85,7 @@ static void emma2rh_pci_host_fixup(struct pci_dev *dev)
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_EMMA2RH,
emma2rh_pci_host_fixup);
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
return irq_map[slot][pin];
}
......
......@@ -19,7 +19,7 @@
/* South bridge slot number is set by the pci probe process */
static u8 sb_slot = 5;
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq = 0;
......
......@@ -39,7 +39,7 @@ static char irq_tab_mace[][5] __initdata = {
* irqs. I suppose a device without a pin A will thank us for doing it
* right if there exists such a broken piece of crap.
*/
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
return irq_tab_mace[slot][pin];
}
......
......@@ -23,7 +23,7 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
return 0;
}
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
return of_irq_parse_and_map_pci(dev, slot, pin);
}
......@@ -51,7 +51,7 @@ static char irq_tab[][5] __initdata = {
{0, 0, 0, 0, 0}, /* 27: Unused */
};
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int virq;
......
......@@ -32,7 +32,7 @@ static void print_fixup_info(const struct pci_dev *pdev)
pdev->vendor, pdev->device, pdev->irq);
}
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
print_fixup_info(dev);
return dev->irq;
......
......@@ -38,7 +38,7 @@ static char irq_tab[][5] __initdata = {
{0, PCID, PCIA, PCIB, PCIC } /* 21: PCI Slot 4 */
};
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int virq;
virq = irq_tab[slot][pin];
......
......@@ -34,7 +34,7 @@ static const int irq_tab_mpc30x[] __initconst = {
[29] = MQ200_IRQ,
};
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
if (slot == 30)
return internal_func_irqs[PCI_FUNC(dev->devfn)];
......
......@@ -202,7 +202,7 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
* RETURNS: IRQ number
*
****************************************************************************/
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
#if !defined(CONFIG_PMC_MSP7120_GW) && !defined(CONFIG_PMC_MSP7120_EVAL)
printk(KERN_WARNING "PCI: unknown board, no PCI IRQs assigned.\n");
......
......@@ -130,7 +130,7 @@ static inline int is_rm300_revd(void)
return (csmsr & 0xa0) == 0x20;
}
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
switch (sni_brd_type) {
case SNI_BRD_PCI_TOWER_CPLUS:
......
......@@ -23,7 +23,7 @@
#include <asm/vr41xx/tb0219.h>
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq = -1;
......
......@@ -23,7 +23,7 @@
#include <asm/vr41xx/giu.h>
#include <asm/vr41xx/tb0226.h>
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq = -1;
......
......@@ -22,7 +22,7 @@
#include <asm/vr41xx/tb0287.h>
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
unsigned char bus;
int irq = -1;
......
......@@ -522,7 +522,7 @@ static int __init alchemy_pci_init(void)
arch_initcall(alchemy_pci_init);
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
struct alchemy_pci_context *ctx = dev->sysdata;
if (ctx && ctx->board_map_irq)
......
......@@ -28,7 +28,7 @@
#include <linux/bcma/bcma.h>
#include <bcm47xx.h>
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
return 0;
}
......
......@@ -61,7 +61,7 @@ arch_initcall(lasat_pci_setup);
#define LASAT_IRQ_PCIC (LASAT_IRQ_BASE + 7)
#define LASAT_IRQ_PCID (LASAT_IRQ_BASE + 8)
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
switch (slot) {
case 1:
......
......@@ -361,7 +361,7 @@ static int mt7620_pci_probe(struct platform_device *pdev)
return 0;
}
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
u16 cmd;
u32 val;
......
......@@ -59,7 +59,7 @@ union octeon_pci_address {
} s;
};
int __initconst (*octeon_pcibios_map_irq)(const struct pci_dev *dev,
int (*octeon_pcibios_map_irq)(const struct pci_dev *dev,
u8 slot, u8 pin);
enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID;
......@@ -74,7 +74,7 @@ enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID;
* as it goes through each bridge.
* Returns Interrupt number for the device
*/
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
if (octeon_pcibios_map_irq)
return octeon_pcibios_map_irq(dev, slot, pin);
......
......@@ -181,7 +181,7 @@ static inline void rt2880_pci_write_u32(unsigned long reg, u32 val)
spin_unlock_irqrestore(&rt2880_pci_lock, flags);
}
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
u16 cmd;
int irq = -1;
......
......@@ -564,7 +564,7 @@ static int rt3883_pci_probe(struct platform_device *pdev)
return err;
}
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
return of_irq_parse_and_map_pci(dev, slot, pin);
}
......
......@@ -205,7 +205,7 @@ int xlp_socdev_to_node(const struct pci_dev *lnkdev)
return PCI_SLOT(lnkdev->devfn) / 8;
}
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
struct pci_dev *lnkdev;
int lnkfunc, node;
......
......@@ -315,7 +315,7 @@ static void xls_pcie_ack_b(struct irq_data *d)
}
}
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
return get_irq_vector(dev);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册