提交 8a917d2f 编写于 作者: K Kalle Jokiniemi 提交者: Kevin Hilman

ARM: OMAP: SMS: save/restore of SMS_SYSCONFIG for off-mode

The SMS_SYSCONFIG register gets reset in off mode, added a
save/restore mechanism for that.
Signed-off-by: NKalle Jokiniemi <kalle.jokiniemi@digia.com>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
上级 ba50ea7e
......@@ -399,6 +399,7 @@ static void omap_sram_idle(void)
omap3_core_restore_context();
omap3_prcm_restore_context();
omap3_sram_restore_context();
omap2_sms_restore_context();
}
if (per_next_state < PWRDM_POWER_ON) {
per_prev_state =
......
......@@ -37,11 +37,37 @@ static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1;
void __iomem *omap2_sdrc_base;
void __iomem *omap2_sms_base;
struct omap2_sms_regs {
u32 sms_sysconfig;
};
static struct omap2_sms_regs sms_context;
/* SDRC_POWER register bits */
#define SDRC_POWER_EXTCLKDIS_SHIFT 3
#define SDRC_POWER_PWDENA_SHIFT 2
#define SDRC_POWER_PAGEPOLICY_SHIFT 0
/**
* omap2_sms_save_context - Save SMS registers
*
* Save SMS registers that need to be restored after off mode.
*/
void omap2_sms_save_context(void)
{
sms_context.sms_sysconfig = sms_read_reg(SMS_SYSCONFIG);
}
/**
* omap2_sms_restore_context - Restore SMS registers
*
* Restore SMS registers that need to be Restored after off mode.
*/
void omap2_sms_restore_context(void)
{
sms_write_reg(sms_context.sms_sysconfig, SMS_SYSCONFIG);
}
/**
* omap2_sdrc_get_params - return SDRC register values for a given clock rate
* @r: SDRC clock rate (in Hz)
......@@ -132,4 +158,5 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) |
(1 << SDRC_POWER_PAGEPOLICY_SHIFT);
sdrc_write_reg(l, SDRC_POWER);
omap2_sms_save_context();
}
......@@ -120,6 +120,8 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
int omap2_sdrc_get_params(unsigned long r,
struct omap_sdrc_params **sdrc_cs0,
struct omap_sdrc_params **sdrc_cs1);
void omap2_sms_save_context(void);
void omap2_sms_restore_context(void);
#ifdef CONFIG_ARCH_OMAP2
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册