Skip to content

C
clone-Linux

gsplhtlxg / clone-Linux

通知 2
Star 0
Fork 1
C
clone-Linux

体验新版 GitCode，发现更多精彩内容 >>

提交 88b9e750 编写于 作者: J Jean Delvare 提交者： Jean Delvare
浏览文件
操作

i2c-amd8111: Proposed cleanups 

Proposed cleanups to the i2c-amd8111 SMBus driver:
* Fold long lines.
* Add an explicit mask when writing the low byte of a word.
* Use I2C_SMBUS_BLOCK_MAX instead of hardcoding 32.
* Discard extra blank lines.
* Use boolean not instead of bitwise not for bit tests, it's clearer.
* Return -EBUSY rather than -1 on I/O resource conflict.
* Fix a race on device registration, initialization should be done
  before the bus is registered.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
上级 55249cf7
隐藏空白更改
内联 并排
Showing with 42 addition and 28 deletion
drivers/i2c/busses/i2c-amd8111.c
浏览文件 @ 88b9e750
......@@ -76,7 +76,8 @@ static unsigned int amd_ec_wait_write(struct amd_smbus *smbus)
udelay(1);
if (!timeout) {
dev_warn(&smbus->dev->dev, "Timeout while waiting for IBF to clear\n");
dev_warn(&smbus->dev->dev,
"Timeout while waiting for IBF to clear\n");
return -1;
}
......@@ -91,14 +92,16 @@ static unsigned int amd_ec_wait_read(struct amd_smbus *smbus)
udelay(1);
if (!timeout) {
dev_warn(&smbus->dev->dev, "Timeout while waiting for OBF to set\n");
dev_warn(&smbus->dev->dev,
"Timeout while waiting for OBF to set\n");
return -1;
}
return 0;
}
static unsigned int amd_ec_read(struct amd_smbus *smbus, unsigned char address, unsigned char *data)
static unsigned int amd_ec_read(struct amd_smbus *smbus, unsigned char address,
unsigned char *data)
{
if (amd_ec_wait_write(smbus))
return -1;
......@@ -115,7 +118,8 @@ static unsigned int amd_ec_read(struct amd_smbus *smbus, unsigned char address,
return 0;
}
static unsigned int amd_ec_write(struct amd_smbus *smbus, unsigned char address, unsigned char data)
static unsigned int amd_ec_write(struct amd_smbus *smbus, unsigned char address,
unsigned char data)
{
if (amd_ec_wait_write(smbus))
return -1;
......@@ -175,18 +179,19 @@ static unsigned int amd_ec_write(struct amd_smbus *smbus, unsigned char address,
#define AMD_SMB_PRTCL_PEC 0x80
static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short flags,
char read_write, u8 command, int size, union i2c_smbus_data * data)
static s32 amd8111_access(struct i2c_adapter * adap, u16 addr,
unsigned short flags, char read_write, u8 command, int size,
union i2c_smbus_data * data)
{
struct amd_smbus *smbus = adap->algo_data;
unsigned char protocol, len, pec, temp[2];
int i;
protocol = (read_write == I2C_SMBUS_READ) ? AMD_SMB_PRTCL_READ : AMD_SMB_PRTCL_WRITE;
protocol = (read_write == I2C_SMBUS_READ) ? AMD_SMB_PRTCL_READ
: AMD_SMB_PRTCL_WRITE;
pec = (flags & I2C_CLIENT_PEC) ? AMD_SMB_PRTCL_PEC : 0;
switch (size) {
case I2C_SMBUS_QUICK:
protocol |= AMD_SMB_PRTCL_QUICK;
read_write = I2C_SMBUS_WRITE;
......@@ -208,8 +213,10 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl
case I2C_SMBUS_WORD_DATA:
amd_ec_write(smbus, AMD_SMB_CMD, command);
if (read_write == I2C_SMBUS_WRITE) {
amd_ec_write(smbus, AMD_SMB_DATA, data->word);
amd_ec_write(smbus, AMD_SMB_DATA + 1, data->word >> 8);
amd_ec_write(smbus, AMD_SMB_DATA,
data->word & 0xff);
amd_ec_write(smbus, AMD_SMB_DATA + 1,
data->word >> 8);
}
protocol |= AMD_SMB_PRTCL_WORD_DATA | pec;
break;
......@@ -217,27 +224,31 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl
case I2C_SMBUS_BLOCK_DATA:
amd_ec_write(smbus, AMD_SMB_CMD, command);
if (read_write == I2C_SMBUS_WRITE) {
len = min_t(u8, data->block[0], 32);
len = min_t(u8, data->block[0],
I2C_SMBUS_BLOCK_MAX);
amd_ec_write(smbus, AMD_SMB_BCNT, len);
for (i = 0; i < len; i++)
amd_ec_write(smbus, AMD_SMB_DATA + i, data->block[i + 1]);
amd_ec_write(smbus, AMD_SMB_DATA + i,
data->block[i + 1]);
}
protocol |= AMD_SMB_PRTCL_BLOCK_DATA | pec;
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
len = min_t(u8, data->block[0], 32);
len = min_t(u8, data->block[0],
I2C_SMBUS_BLOCK_MAX);
amd_ec_write(smbus, AMD_SMB_CMD, command);
amd_ec_write(smbus, AMD_SMB_BCNT, len);
if (read_write == I2C_SMBUS_WRITE)
for (i = 0; i < len; i++)
amd_ec_write(smbus, AMD_SMB_DATA + i, data->block[i + 1]);
amd_ec_write(smbus, AMD_SMB_DATA + i,
data->block[i + 1]);
protocol |= AMD_SMB_PRTCL_I2C_BLOCK_DATA;
break;
case I2C_SMBUS_PROC_CALL:
amd_ec_write(smbus, AMD_SMB_CMD, command);
amd_ec_write(smbus, AMD_SMB_DATA, data->word);
amd_ec_write(smbus, AMD_SMB_DATA, data->word & 0xff);
amd_ec_write(smbus, AMD_SMB_DATA + 1, data->word >> 8);
protocol = AMD_SMB_PRTCL_PROC_CALL | pec;
read_write = I2C_SMBUS_READ;
......@@ -248,7 +259,8 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl
amd_ec_write(smbus, AMD_SMB_CMD, command);
amd_ec_write(smbus, AMD_SMB_BCNT, len);
for (i = 0; i < len; i++)
amd_ec_write(smbus, AMD_SMB_DATA + i, data->block[i + 1]);
amd_ec_write(smbus, AMD_SMB_DATA + i,
data->block[i + 1]);
protocol = AMD_SMB_PRTCL_BLOCK_PROC_CALL | pec;
read_write = I2C_SMBUS_READ;
break;
......@@ -280,7 +292,6 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl
return 0;
switch (size) {
case I2C_SMBUS_BYTE:
case I2C_SMBUS_BYTE_DATA:
amd_ec_read(smbus, AMD_SMB_DATA, &data->byte);
......@@ -296,10 +307,11 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl
case I2C_SMBUS_BLOCK_DATA:
case I2C_SMBUS_BLOCK_PROC_CALL:
amd_ec_read(smbus, AMD_SMB_BCNT, &len);
len = min_t(u8, len, 32);
len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX);
case I2C_SMBUS_I2C_BLOCK_DATA:
for (i = 0; i < len; i++)
amd_ec_read(smbus, AMD_SMB_DATA + i, data->block + i + 1);
amd_ec_read(smbus, AMD_SMB_DATA + i,
data->block + i + 1);
data->block[0] = len;
break;
}
......@@ -310,7 +322,8 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short fl
static u32 amd8111_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA |
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA |
I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
I2C_FUNC_SMBUS_I2C_BLOCK | I2C_FUNC_SMBUS_HWPEC_CALC;
......@@ -329,12 +342,13 @@ static struct pci_device_id amd8111_ids[] = {
MODULE_DEVICE_TABLE (pci, amd8111_ids);
static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_id *id)
static int __devinit amd8111_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
struct amd_smbus *smbus;
int error = -ENODEV;
int error;
if (~pci_resource_flags(dev, 0) & IORESOURCE_IO)
if (!(pci_resource_flags(dev, 0) & IORESOURCE_IO))
return -ENODEV;
smbus = kzalloc(sizeof(struct amd_smbus), GFP_KERNEL);
......@@ -345,8 +359,10 @@ static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_
smbus->base = pci_resource_start(dev, 0);
smbus->size = pci_resource_len(dev, 0);
if (!request_region(smbus->base, smbus->size, amd8111_driver.name))
if (!request_region(smbus->base, smbus->size, amd8111_driver.name)) {
error = -EBUSY;
goto out_kfree;
}
smbus->adapter.owner = THIS_MODULE;
snprintf(smbus->adapter.name, I2C_NAME_SIZE,
......@@ -359,11 +375,11 @@ static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_
/* set up the driverfs linkage to our parent device */
smbus->adapter.dev.parent = &dev->dev;
pci_write_config_dword(smbus->dev, AMD_PCI_MISC, 0);
error = i2c_add_adapter(&smbus->adapter);
if (error)
goto out_release_region;
pci_write_config_dword(smbus->dev, AMD_PCI_MISC, 0);
pci_set_drvdata(dev, smbus);
return 0;
......@@ -371,10 +387,9 @@ static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_
release_region(smbus->base, smbus->size);
out_kfree:
kfree(smbus);
return -1;
return error;
}
static void __devexit amd8111_remove(struct pci_dev *dev)
{
struct amd_smbus *smbus = pci_get_drvdata(dev);
......@@ -396,7 +411,6 @@ static int __init i2c_amd8111_init(void)
return pci_register_driver(&amd8111_driver);
}
static void __exit i2c_amd8111_exit(void)
{
pci_unregister_driver(&amd8111_driver);
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或