提交 820b127d 编写于 作者: M Mike Frysinger

Blackfin: split optimization settings more

We need to place icache flush funcs into L1 inst sram to work around a
hardware anomaly.  But this currently breaks SMP support as the L1 inst
sram is per-core and cannot be called directly.  So in preparation for
making that work, split the two options.

Further, split out the SMP depend so that we can allow some for SMP.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
上级 567ebfc9
......@@ -690,13 +690,13 @@ endmenu
menu "Blackfin Kernel Optimizations"
depends on !SMP
comment "Memory Optimizations"
config I_ENTRY_L1
bool "Locate interrupt entry code in L1 Memory"
default y
depends on !SMP
help
If enabled, interrupt entry code (STORE/RESTORE CONTEXT) is linked
into L1 instruction memory. (less latency)
......@@ -704,6 +704,7 @@ config I_ENTRY_L1
config EXCPT_IRQ_SYSC_L1
bool "Locate entire ASM lowlevel exception / interrupt - Syscall and CPLB handler code in L1 Memory"
default y
depends on !SMP
help
If enabled, the entire ASM lowlevel exception and interrupt entry code
(STORE/RESTORE CONTEXT) is linked into L1 instruction memory.
......@@ -712,6 +713,7 @@ config EXCPT_IRQ_SYSC_L1
config DO_IRQ_L1
bool "Locate frequently called do_irq dispatcher function in L1 Memory"
default y
depends on !SMP
help
If enabled, the frequently called do_irq dispatcher function is linked
into L1 instruction memory. (less latency)
......@@ -719,6 +721,7 @@ config DO_IRQ_L1
config CORE_TIMER_IRQ_L1
bool "Locate frequently called timer_interrupt() function in L1 Memory"
default y
depends on !SMP
help
If enabled, the frequently called timer_interrupt() function is linked
into L1 instruction memory. (less latency)
......@@ -726,6 +729,7 @@ config CORE_TIMER_IRQ_L1
config IDLE_L1
bool "Locate frequently idle function in L1 Memory"
default y
depends on !SMP
help
If enabled, the frequently called idle function is linked
into L1 instruction memory. (less latency)
......@@ -733,6 +737,7 @@ config IDLE_L1
config SCHEDULE_L1
bool "Locate kernel schedule function in L1 Memory"
default y
depends on !SMP
help
If enabled, the frequently called kernel schedule is linked
into L1 instruction memory. (less latency)
......@@ -740,6 +745,7 @@ config SCHEDULE_L1
config ARITHMETIC_OPS_L1
bool "Locate kernel owned arithmetic functions in L1 Memory"
default y
depends on !SMP
help
If enabled, arithmetic functions are linked
into L1 instruction memory. (less latency)
......@@ -747,6 +753,7 @@ config ARITHMETIC_OPS_L1
config ACCESS_OK_L1
bool "Locate access_ok function in L1 Memory"
default y
depends on !SMP
help
If enabled, the access_ok function is linked
into L1 instruction memory. (less latency)
......@@ -754,6 +761,7 @@ config ACCESS_OK_L1
config MEMSET_L1
bool "Locate memset function in L1 Memory"
default y
depends on !SMP
help
If enabled, the memset function is linked
into L1 instruction memory. (less latency)
......@@ -761,6 +769,7 @@ config MEMSET_L1
config MEMCPY_L1
bool "Locate memcpy function in L1 Memory"
default y
depends on !SMP
help
If enabled, the memcpy function is linked
into L1 instruction memory. (less latency)
......@@ -768,6 +777,7 @@ config MEMCPY_L1
config STRCMP_L1
bool "locate strcmp function in L1 Memory"
default y
depends on !SMP
help
If enabled, the strcmp function is linked
into L1 instruction memory (less latency).
......@@ -775,6 +785,7 @@ config STRCMP_L1
config STRNCMP_L1
bool "locate strncmp function in L1 Memory"
default y
depends on !SMP
help
If enabled, the strncmp function is linked
into L1 instruction memory (less latency).
......@@ -782,6 +793,7 @@ config STRNCMP_L1
config STRCPY_L1
bool "locate strcpy function in L1 Memory"
default y
depends on !SMP
help
If enabled, the strcpy function is linked
into L1 instruction memory (less latency).
......@@ -789,6 +801,7 @@ config STRCPY_L1
config STRNCPY_L1
bool "locate strncpy function in L1 Memory"
default y
depends on !SMP
help
If enabled, the strncpy function is linked
into L1 instruction memory (less latency).
......@@ -796,6 +809,7 @@ config STRNCPY_L1
config SYS_BFIN_SPINLOCK_L1
bool "Locate sys_bfin_spinlock function in L1 Memory"
default y
depends on !SMP
help
If enabled, sys_bfin_spinlock function is linked
into L1 instruction memory. (less latency)
......@@ -803,6 +817,7 @@ config SYS_BFIN_SPINLOCK_L1
config IP_CHECKSUM_L1
bool "Locate IP Checksum function in L1 Memory"
default n
depends on !SMP
help
If enabled, the IP Checksum function is linked
into L1 instruction memory. (less latency)
......@@ -811,7 +826,7 @@ config CACHELINE_ALIGNED_L1
bool "Locate cacheline_aligned data to L1 Data Memory"
default y if !BF54x
default n if BF54x
depends on !BF531
depends on !SMP && !BF531
help
If enabled, cacheline_aligned data is linked
into L1 data memory. (less latency)
......@@ -819,7 +834,7 @@ config CACHELINE_ALIGNED_L1
config SYSCALL_TAB_L1
bool "Locate Syscall Table L1 Data Memory"
default n
depends on !BF531
depends on !SMP && !BF531
help
If enabled, the Syscall LUT is linked
into L1 data memory. (less latency)
......@@ -827,16 +842,17 @@ config SYSCALL_TAB_L1
config CPLB_SWITCH_TAB_L1
bool "Locate CPLB Switch Tables L1 Data Memory"
default n
depends on !BF531
depends on !SMP && !BF531
help
If enabled, the CPLB Switch Tables are linked
into L1 data memory. (less latency)
config CACHE_FLUSH_L1
bool "Locate cache flush funcs in L1 Inst Memory"
config ICACHE_FLUSH_L1
bool "Locate icache flush funcs in L1 Inst Memory"
default y
depends on !SMP
help
If enabled, the Blackfin cache flushing functions are linked
If enabled, the Blackfin icache flushing functions are linked
into L1 instruction memory.
Note that this might be required to address anomalies, but
......@@ -844,9 +860,18 @@ config CACHE_FLUSH_L1
If you are using a processor affected by an anomaly, the build
system will double check for you and prevent it.
config DCACHE_FLUSH_L1
bool "Locate dcache flush funcs in L1 Inst Memory"
default y
depends on !SMP
help
If enabled, the Blackfin dcache flushing functions are linked
into L1 instruction memory.
config APP_STACK_L1
bool "Support locating application stack in L1 Scratch Memory"
default y
depends on !SMP
help
If enabled the application stack can be located in L1
scratch memory (less latency).
......@@ -856,7 +881,7 @@ config APP_STACK_L1
config EXCEPTION_L1_SCRATCH
bool "Locate exception stack in L1 Scratch Memory"
default n
depends on !APP_STACK_L1
depends on !SMP && !APP_STACK_L1
help
Whenever an exception occurs, use the L1 Scratch memory for
stack storage. You cannot place the stacks of FLAT binaries
......@@ -868,6 +893,7 @@ comment "Speed Optimizations"
config BFIN_INS_LOWOVERHEAD
bool "ins[bwl] low overhead, higher interrupt latency"
default y
depends on !SMP
help
Reads on the Blackfin are speculative. In Blackfin terms, this means
they can be interrupted at any time (even after they have been issued
......
......@@ -61,6 +61,6 @@
# error "Anomaly 05000220 does not allow you to use Write Back cache with L2 or External Memory"
#endif
#if ANOMALY_05000491 && !defined(CONFIG_CACHE_FLUSH_L1)
#if ANOMALY_05000491 && !defined(CONFIG_ICACHE_FLUSH_L1)
# error You need IFLUSH in L1 inst while Anomaly 05000491 applies
#endif
......@@ -11,12 +11,6 @@
#include <asm/cache.h>
#include <asm/page.h>
#ifdef CONFIG_CACHE_FLUSH_L1
.section .l1.text
#else
.text
#endif
/* 05000443 - IFLUSH cannot be last instruction in hardware loop */
#if ANOMALY_05000443
# define BROK_FLUSH_INST "IFLUSH"
......@@ -68,11 +62,23 @@
RTS;
.endm
#ifdef CONFIG_ICACHE_FLUSH_L1
.section .l1.text
#else
.text
#endif
/* Invalidate all instruction cache lines assocoiated with this memory area */
ENTRY(_blackfin_icache_flush_range)
do_flush IFLUSH
ENDPROC(_blackfin_icache_flush_range)
#ifdef CONFIG_DCACHE_FLUSH_L1
.section .l1.text
#else
.text
#endif
/* Throw away all D-cached data in specified region without any obligation to
* write them back. Since the Blackfin ISA does not have an "invalidate"
* instruction, we use flush/invalidate. Perhaps as a speed optimization we
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册