提交 80d34362 编写于 作者: M Michael Krufky 提交者: Linus Torvalds

[PATCH] DViCO FusionHDTV3 Gold-T documentation fix

Even though it says DViCO FusionHDTV3 Gold-Q on the box, Gold-T is printed
on the card.  This fix corrects the error in all places, and corrects the
tuner name Thomson DDT 7611 (ATSC/NTSC) in the documentation.

This applies against 2.6.12-rc5-mm2 after applying Manueal Capinha's
patch "Add support for PixelView Ultra Pro in v4l" (because of the
change from card=27 to card=28)
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 239df2e2
...@@ -26,4 +26,4 @@ card=24 - Hauppauge WinTV 28xxx (Roslyn) models ...@@ -26,4 +26,4 @@ card=24 - Hauppauge WinTV 28xxx (Roslyn) models
card=25 - Digital-Logic MICROSPACE Entertainment Center (MEC) card=25 - Digital-Logic MICROSPACE Entertainment Center (MEC)
card=26 - IODATA GV/BCTV7E card=26 - IODATA GV/BCTV7E
card=27 - PixelView PlayTV Ultra Pro (Stereo) card=27 - PixelView PlayTV Ultra Pro (Stereo)
card=28 - DViCO - FusionHDTV 3 Gold-Q card=28 - DViCO - FusionHDTV 3 Gold-T
...@@ -58,4 +58,4 @@ tuner=56 - Philips PAL/SECAM multi (FQ1216AME MK4) ...@@ -58,4 +58,4 @@ tuner=56 - Philips PAL/SECAM multi (FQ1216AME MK4)
tuner=57 - Philips FQ1236A MK4 tuner=57 - Philips FQ1236A MK4
tuner=58 - Ymec TVision TVF-8531MF tuner=58 - Ymec TVision TVF-8531MF
tuner=59 - Ymec TVision TVF-5533MF tuner=59 - Ymec TVision TVF-5533MF
tuner=60 - Thomson DDT 7611 tuner=60 - Thomson DDT 7611 (ATSC/NTSC)
...@@ -428,16 +428,11 @@ struct cx88_board cx88_boards[] = { ...@@ -428,16 +428,11 @@ struct cx88_board cx88_boards[] = {
.vmux = 2, .vmux = 2,
.gpio0 = 0x0f00, .gpio0 = 0x0f00,
}}, }},
#if 0
.ts = {
.type = CX88_TS,
.gpio0 = 0x00000f01, /* Hooked to tuner reset bit */
}
#endif
}, },
[CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q] = { [CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T] = {
.name = "DViCO - FusionHDTV 3 Gold-Q", .name = "DViCO - FusionHDTV 3 Gold-T",
.tuner_type = 52, /* Thomson DDT 7610 ATSC/NTSC - Its actually a 7611 chip, but this works */ .tuner_type = 52, /* Thomson DDT 7611 ATSC/NTSC */
/* See DViCO FusionHDTV 3 Gold for GPIO documentation. */
.input = {{ .input = {{
.type = CX88_VMUX_TELEVISION, .type = CX88_VMUX_TELEVISION,
.vmux = 0, .vmux = 0,
...@@ -455,12 +450,6 @@ struct cx88_board cx88_boards[] = { ...@@ -455,12 +450,6 @@ struct cx88_board cx88_boards[] = {
.vmux = 2, .vmux = 2,
.gpio0 = 0x0f00, .gpio0 = 0x0f00,
}}, }},
#if 0
.ts = {
.type = CX88_TS,
.gpio0 = 0x00000f01, /* Hooked to tuner reset bit */
}
#endif
}, },
[CX88_BOARD_HAUPPAUGE_DVB_T1] = { [CX88_BOARD_HAUPPAUGE_DVB_T1] = {
.name = "Hauppauge Nova-T DVB-T", .name = "Hauppauge Nova-T DVB-T",
...@@ -723,7 +712,7 @@ struct cx88_subid cx88_subids[] = { ...@@ -723,7 +712,7 @@ struct cx88_subid cx88_subids[] = {
},{ },{
.subvendor = 0x18ac, .subvendor = 0x18ac,
.subdevice = 0xd820, .subdevice = 0xd820,
.card = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q, .card = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T,
},{ },{
.subvendor = 0x18AC, .subvendor = 0x18AC,
.subdevice = 0xDB00, .subdevice = 0xDB00,
......
...@@ -163,7 +163,7 @@ extern struct sram_channel cx88_sram_channels[]; ...@@ -163,7 +163,7 @@ extern struct sram_channel cx88_sram_channels[];
#define CX88_BOARD_DIGITALLOGIC_MEC 25 #define CX88_BOARD_DIGITALLOGIC_MEC 25
#define CX88_BOARD_IODATA_GVBCTV7E 26 #define CX88_BOARD_IODATA_GVBCTV7E 26
#define CX88_BOARD_PIXELVIEW_PLAYTV_ULTRA_PRO 27 #define CX88_BOARD_PIXELVIEW_PLAYTV_ULTRA_PRO 27
#define CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q 28 #define CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T 28
enum cx88_itype { enum cx88_itype {
CX88_VMUX_COMPOSITE1 = 1, CX88_VMUX_COMPOSITE1 = 1,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册