提交 7b557376 编写于 作者: L Linus Torvalds

Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6:
  Input Serio: Blackfin doesnt support I8042 - make sure it doesnt get selected
  Blackfin arch: add BF54x I2C/TWI TWI0 driver support
  Blackfin On-Chip RTC driver update for supporting BF54x
  Blackfin Ethernet MAC driver: fix bug Report returned -ENOMEM upwards (in case L1/uncached memory alloc fails)
  Blackfin arch: add error message when IRQ no available
  Blackfin arch: Initialize the exception vectors early in the boot process
  Blackfin arch: fix a compiling warning about dma-mapping
  Blackfin arch: switch to using proper defines this time THREAD_SIZE and PAGE_SIZE instead of just PAGE_SIZE everywhere
  Blackfin arch: fix bug which unaligns the init thread's stack and causes the current macro to fail.
  Blackfin arch: Load P0 before storing through it
  Blackfin arch: fix KGDB bug, dont forget last parameter.
  Blackfin arch: add selections for BF544 and BF542
  Blackfin arch: use bfin_read_SWRST() now that BF561 provides it
  Blackfin arch: setup aliases for some core Core A MMRs
...@@ -24,6 +24,8 @@ machine-$(CONFIG_BF533) := bf533 ...@@ -24,6 +24,8 @@ machine-$(CONFIG_BF533) := bf533
machine-$(CONFIG_BF534) := bf537 machine-$(CONFIG_BF534) := bf537
machine-$(CONFIG_BF536) := bf537 machine-$(CONFIG_BF536) := bf537
machine-$(CONFIG_BF537) := bf537 machine-$(CONFIG_BF537) := bf537
machine-$(CONFIG_BF542) := bf548
machine-$(CONFIG_BF544) := bf548
machine-$(CONFIG_BF548) := bf548 machine-$(CONFIG_BF548) := bf548
machine-$(CONFIG_BF549) := bf548 machine-$(CONFIG_BF549) := bf548
machine-$(CONFIG_BF561) := bf561 machine-$(CONFIG_BF561) := bf561
...@@ -36,6 +38,8 @@ cpu-$(CONFIG_BF533) := bf533 ...@@ -36,6 +38,8 @@ cpu-$(CONFIG_BF533) := bf533
cpu-$(CONFIG_BF534) := bf534 cpu-$(CONFIG_BF534) := bf534
cpu-$(CONFIG_BF536) := bf536 cpu-$(CONFIG_BF536) := bf536
cpu-$(CONFIG_BF537) := bf537 cpu-$(CONFIG_BF537) := bf537
cpu-$(CONFIG_BF542) := bf542
cpu-$(CONFIG_BF544) := bf544
cpu-$(CONFIG_BF548) := bf548 cpu-$(CONFIG_BF548) := bf548
cpu-$(CONFIG_BF549) := bf549 cpu-$(CONFIG_BF549) := bf549
cpu-$(CONFIG_BF561) := bf561 cpu-$(CONFIG_BF561) := bf561
......
...@@ -160,7 +160,8 @@ dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, ...@@ -160,7 +160,8 @@ dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
BUG_ON(direction == DMA_NONE); BUG_ON(direction == DMA_NONE);
for (i = 0; i < nents; i++, sg++) { for (i = 0; i < nents; i++, sg++) {
sg->dma_address = page_address(sg->page) + sg->offset; sg->dma_address = (dma_addr_t)(page_address(sg->page) +
sg->offset);
invalidate_dcache_range(sg_dma_address(sg), invalidate_dcache_range(sg_dma_address(sg),
sg_dma_address(sg) + sg_dma_address(sg) +
......
...@@ -402,11 +402,7 @@ void __init setup_arch(char **cmdline_p) ...@@ -402,11 +402,7 @@ void __init setup_arch(char **cmdline_p)
if (l1_length > L1_DATA_A_LENGTH) if (l1_length > L1_DATA_A_LENGTH)
panic("L1 data memory overflow\n"); panic("L1 data memory overflow\n");
#ifdef BF561_FAMILY
_bfin_swrst = bfin_read_SICA_SWRST();
#else
_bfin_swrst = bfin_read_SWRST(); _bfin_swrst = bfin_read_SWRST();
#endif
/* Copy atomic sequences to their fixed location, and sanity check that /* Copy atomic sequences to their fixed location, and sanity check that
these locations are the ones that we advertise to userspace. */ these locations are the ones that we advertise to userspace. */
...@@ -429,6 +425,7 @@ void __init setup_arch(char **cmdline_p) ...@@ -429,6 +425,7 @@ void __init setup_arch(char **cmdline_p)
BUG_ON((char *)&atomic_xor32 - (char *)&fixed_code_start BUG_ON((char *)&atomic_xor32 - (char *)&fixed_code_start
!= ATOMIC_XOR32 - FIXED_CODE_START); != ATOMIC_XOR32 - FIXED_CODE_START);
init_exception_vectors();
bf53x_cache_init(); bf53x_cache_init();
} }
......
...@@ -140,7 +140,7 @@ asmlinkage void trap_c(struct pt_regs *fp) ...@@ -140,7 +140,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
#ifdef CONFIG_KGDB #ifdef CONFIG_KGDB
# define CHK_DEBUGGER_TRAP() \ # define CHK_DEBUGGER_TRAP() \
do { \ do { \
CHK_DEBUGGER(trapnr, sig, info.si_code, fp); \ CHK_DEBUGGER(trapnr, sig, info.si_code, fp, ); \
} while (0) } while (0)
# define CHK_DEBUGGER_TRAP_MAYBE() \ # define CHK_DEBUGGER_TRAP_MAYBE() \
do { \ do { \
......
...@@ -32,6 +32,7 @@ ...@@ -32,6 +32,7 @@
#include <asm-generic/vmlinux.lds.h> #include <asm-generic/vmlinux.lds.h>
#include <asm/mem_map.h> #include <asm/mem_map.h>
#include <asm/page.h> #include <asm/page.h>
#include <asm/thread_info.h>
OUTPUT_FORMAT("elf32-bfin") OUTPUT_FORMAT("elf32-bfin")
ENTRY(__start) ENTRY(__start)
...@@ -64,8 +65,12 @@ SECTIONS ...@@ -64,8 +65,12 @@ SECTIONS
.data : .data :
{ {
. = ALIGN(PAGE_SIZE); /* make sure the init_task is aligned to the
* kernel thread size so we can locate the kernel
* stack properly and quickly.
*/
__sdata = .; __sdata = .;
. = ALIGN(THREAD_SIZE);
*(.data.init_task) *(.data.init_task)
DATA_DATA DATA_DATA
CONSTRUCTORS CONSTRUCTORS
...@@ -73,14 +78,14 @@ SECTIONS ...@@ -73,14 +78,14 @@ SECTIONS
. = ALIGN(32); . = ALIGN(32);
*(.data.cacheline_aligned) *(.data.cacheline_aligned)
. = ALIGN(PAGE_SIZE); . = ALIGN(THREAD_SIZE);
__edata = .; __edata = .;
} }
. = ALIGN(PAGE_SIZE);
___init_begin = .; ___init_begin = .;
.init : .init :
{ {
. = ALIGN(PAGE_SIZE);
__sinittext = .; __sinittext = .;
*(.init.text) *(.init.text)
__einittext = .; __einittext = .;
...@@ -153,10 +158,9 @@ SECTIONS ...@@ -153,10 +158,9 @@ SECTIONS
__ebss_b_l1 = .; __ebss_b_l1 = .;
} }
. = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1); ___init_end = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1);
___init_end = ALIGN(PAGE_SIZE);
.bss ___init_end : .bss LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1) :
{ {
. = ALIGN(4); . = ALIGN(4);
___bss_start = .; ___bss_start = .;
......
...@@ -440,15 +440,15 @@ ENTRY(_bfin_reset) ...@@ -440,15 +440,15 @@ ENTRY(_bfin_reset)
SSYNC; SSYNC;
/* make sure SYSCR is set to use BMODE */ /* make sure SYSCR is set to use BMODE */
P0.h = hi(SICA_SYSCR); P0.h = hi(SYSCR);
P0.l = lo(SICA_SYSCR); P0.l = lo(SYSCR);
R0.l = 0x20; R0.l = 0x20; /* on BF561, disable core b */
W[P0] = R0.l; W[P0] = R0.l;
SSYNC; SSYNC;
/* issue a system soft reset */ /* issue a system soft reset */
P1.h = hi(SICA_SWRST); P1.h = hi(SWRST);
P1.l = lo(SICA_SWRST); P1.l = lo(SWRST);
R1.l = 0x0007; R1.l = 0x0007;
W[P1] = R1; W[P1] = R1;
SSYNC; SSYNC;
......
...@@ -60,6 +60,9 @@ ENDPROC(_bfin_write_IMEM_CONTROL) ...@@ -60,6 +60,9 @@ ENDPROC(_bfin_write_IMEM_CONTROL)
#if defined(CONFIG_BLKFIN_DCACHE) #if defined(CONFIG_BLKFIN_DCACHE)
ENTRY(_bfin_write_DMEM_CONTROL) ENTRY(_bfin_write_DMEM_CONTROL)
P0.l = (DMEM_CONTROL & 0xFFFF);
P0.h = (DMEM_CONTROL >> 16);
CLI R1; CLI R1;
SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
.align 8; .align 8;
......
...@@ -358,26 +358,10 @@ static void bf561_demux_gpio_irq(unsigned int inta_irq, ...@@ -358,26 +358,10 @@ static void bf561_demux_gpio_irq(unsigned int inta_irq,
#endif /* CONFIG_IRQCHIP_DEMUX_GPIO */ #endif /* CONFIG_IRQCHIP_DEMUX_GPIO */
/* void __init init_exception_vectors(void)
* This function should be called during kernel startup to initialize
* the BFin IRQ handling routines.
*/
int __init init_arch_irq(void)
{ {
int irq;
unsigned long ilat = 0;
/* Disable all the peripheral intrs - page 4-29 HW Ref manual */
bfin_write_SICA_IMASK0(SIC_UNMASK_ALL);
bfin_write_SICA_IMASK1(SIC_UNMASK_ALL);
SSYNC(); SSYNC();
bfin_write_SICA_IWR0(IWR_ENABLE_ALL);
bfin_write_SICA_IWR1(IWR_ENABLE_ALL);
local_irq_disable();
init_exception_buff();
#ifndef CONFIG_KGDB #ifndef CONFIG_KGDB
bfin_write_EVT0(evt_emulation); bfin_write_EVT0(evt_emulation);
#endif #endif
...@@ -395,6 +379,27 @@ int __init init_arch_irq(void) ...@@ -395,6 +379,27 @@ int __init init_arch_irq(void)
bfin_write_EVT14(evt14_softirq); bfin_write_EVT14(evt14_softirq);
bfin_write_EVT15(evt_system_call); bfin_write_EVT15(evt_system_call);
CSYNC(); CSYNC();
}
/*
* This function should be called during kernel startup to initialize
* the BFin IRQ handling routines.
*/
int __init init_arch_irq(void)
{
int irq;
unsigned long ilat = 0;
/* Disable all the peripheral intrs - page 4-29 HW Ref manual */
bfin_write_SICA_IMASK0(SIC_UNMASK_ALL);
bfin_write_SICA_IMASK1(SIC_UNMASK_ALL);
SSYNC();
bfin_write_SICA_IWR0(IWR_ENABLE_ALL);
bfin_write_SICA_IWR1(IWR_ENABLE_ALL);
local_irq_disable();
init_exception_buff();
for (irq = 0; irq <= SYS_IRQS; irq++) { for (irq = 0; irq <= SYS_IRQS; irq++) {
if (irq <= IRQ_CORETMR) if (irq <= IRQ_CORETMR)
......
...@@ -579,8 +579,12 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq) ...@@ -579,8 +579,12 @@ static unsigned int bfin_gpio_irq_startup(unsigned int irq)
u16 gpionr = irq - IRQ_PA0; u16 gpionr = irq - IRQ_PA0;
u8 pint_val = irq2pint_lut[irq - SYS_IRQS]; u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
if (pint_val == IRQ_NOT_AVAIL) if (pint_val == IRQ_NOT_AVAIL) {
printk(KERN_ERR
"GPIO IRQ %d :Not in PINT Assign table "
"Reconfigure Interrupt to Port Assignemt\n", irq);
return -ENODEV; return -ENODEV;
}
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) { if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
ret = gpio_request(gpionr, NULL); ret = gpio_request(gpionr, NULL);
...@@ -713,6 +717,29 @@ static void bfin_demux_gpio_irq(unsigned int intb_irq, ...@@ -713,6 +717,29 @@ static void bfin_demux_gpio_irq(unsigned int intb_irq,
} }
#endif /* CONFIG_IRQCHIP_DEMUX_GPIO */ #endif /* CONFIG_IRQCHIP_DEMUX_GPIO */
void __init init_exception_vectors(void)
{
SSYNC();
#ifndef CONFIG_KGDB
bfin_write_EVT0(evt_emulation);
#endif
bfin_write_EVT2(evt_evt2);
bfin_write_EVT3(trap);
bfin_write_EVT5(evt_ivhw);
bfin_write_EVT6(evt_timer);
bfin_write_EVT7(evt_evt7);
bfin_write_EVT8(evt_evt8);
bfin_write_EVT9(evt_evt9);
bfin_write_EVT10(evt_evt10);
bfin_write_EVT11(evt_evt11);
bfin_write_EVT12(evt_evt12);
bfin_write_EVT13(evt_evt13);
bfin_write_EVT14(evt14_softirq);
bfin_write_EVT15(evt_system_call);
CSYNC();
}
/* /*
* This function should be called during kernel startup to initialize * This function should be called during kernel startup to initialize
* the BFin IRQ handling routines. * the BFin IRQ handling routines.
...@@ -733,29 +760,10 @@ int __init init_arch_irq(void) ...@@ -733,29 +760,10 @@ int __init init_arch_irq(void)
bfin_write_SIC_IMASK(SIC_UNMASK_ALL); bfin_write_SIC_IMASK(SIC_UNMASK_ALL);
bfin_write_SIC_IWR(IWR_ENABLE_ALL); bfin_write_SIC_IWR(IWR_ENABLE_ALL);
#endif #endif
SSYNC(); SSYNC();
local_irq_disable(); local_irq_disable();
#ifndef CONFIG_KGDB
bfin_write_EVT0(evt_emulation);
#endif
bfin_write_EVT2(evt_evt2);
bfin_write_EVT3(trap);
bfin_write_EVT5(evt_ivhw);
bfin_write_EVT6(evt_timer);
bfin_write_EVT7(evt_evt7);
bfin_write_EVT8(evt_evt8);
bfin_write_EVT9(evt_evt9);
bfin_write_EVT10(evt_evt10);
bfin_write_EVT11(evt_evt11);
bfin_write_EVT12(evt_evt12);
bfin_write_EVT13(evt_evt13);
bfin_write_EVT14(evt14_softirq);
bfin_write_EVT15(evt_system_call);
CSYNC();
#if defined(CONFIG_IRQCHIP_DEMUX_GPIO) && defined(CONFIG_BF54x) #if defined(CONFIG_IRQCHIP_DEMUX_GPIO) && defined(CONFIG_BF54x)
#ifdef CONFIG_PINTx_REASSIGN #ifdef CONFIG_PINTx_REASSIGN
pint[0]->assign = CONFIG_PINT0_ASSIGN; pint[0]->assign = CONFIG_PINT0_ASSIGN;
......
...@@ -92,9 +92,9 @@ config I2C_AU1550 ...@@ -92,9 +92,9 @@ config I2C_AU1550
config I2C_BLACKFIN_TWI config I2C_BLACKFIN_TWI
tristate "Blackfin TWI I2C support" tristate "Blackfin TWI I2C support"
depends on BF534 || BF536 || BF537 depends on BF534 || BF536 || BF537 || BF54x
help help
This is the TWI I2C device driver for Blackfin 534/536/537. This is the TWI I2C device driver for Blackfin 534/536/537/54x.
This driver can also be built as a module. If so, the module This driver can also be built as a module. If so, the module
will be called i2c-bfin-twi. will be called i2c-bfin-twi.
......
...@@ -21,7 +21,7 @@ if SERIO ...@@ -21,7 +21,7 @@ if SERIO
config SERIO_I8042 config SERIO_I8042
tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86 tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86
default y default y
depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K && !BFIN
---help--- ---help---
i8042 is the chip over which the standard AT keyboard and PS/2 i8042 is the chip over which the standard AT keyboard and PS/2
mouse are connected to the computer. If you use these devices, mouse are connected to the computer. If you use these devices,
......
...@@ -798,6 +798,7 @@ static void bf537mac_shutdown(struct net_device *dev) ...@@ -798,6 +798,7 @@ static void bf537mac_shutdown(struct net_device *dev)
*/ */
static int bf537mac_open(struct net_device *dev) static int bf537mac_open(struct net_device *dev)
{ {
int retval;
pr_debug("%s: %s\n", dev->name, __FUNCTION__); pr_debug("%s: %s\n", dev->name, __FUNCTION__);
/* /*
...@@ -811,7 +812,10 @@ static int bf537mac_open(struct net_device *dev) ...@@ -811,7 +812,10 @@ static int bf537mac_open(struct net_device *dev)
} }
/* initial rx and tx list */ /* initial rx and tx list */
desc_list_init(); retval = desc_list_init();
if (retval)
return retval;
bf537mac_setphy(dev); bf537mac_setphy(dev);
setup_system_regs(dev); setup_system_regs(dev);
......
/* /*
* Blackfin On-Chip Real Time Clock Driver * Blackfin On-Chip Real Time Clock Driver
* Supports BF531/BF532/BF533/BF534/BF536/BF537 * Supports BF53[123]/BF53[467]/BF54[2489]
* *
* Copyright 2004-2007 Analog Devices Inc. * Copyright 2004-2007 Analog Devices Inc.
* *
......
...@@ -61,6 +61,7 @@ extern void bfin_dcache_init(void); ...@@ -61,6 +61,7 @@ extern void bfin_dcache_init(void);
extern int read_iloc(void); extern int read_iloc(void);
extern int bfin_console_init(void); extern int bfin_console_init(void);
extern asmlinkage void lower_to_irq14(void); extern asmlinkage void lower_to_irq14(void);
extern void init_exception_vectors(void);
extern void init_dma(void); extern void init_dma(void);
extern void program_IAR(void); extern void program_IAR(void);
extern void evt14_softirq(void); extern void evt14_softirq(void);
......
...@@ -242,6 +242,39 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) ...@@ -242,6 +242,39 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val)
#define bfin_read_TWI0_RCV_DATA16() bfin_read16(TWI0_RCV_DATA16) #define bfin_read_TWI0_RCV_DATA16() bfin_read16(TWI0_RCV_DATA16)
#define bfin_write_TWI0_RCV_DATA16(val) bfin_write16(TWI0_RCV_DATA16, val) #define bfin_write_TWI0_RCV_DATA16(val) bfin_write16(TWI0_RCV_DATA16, val)
#define bfin_read_TWI_CLKDIV() bfin_read16(TWI0_CLKDIV)
#define bfin_write_TWI_CLKDIV(val) bfin_write16(TWI0_CLKDIV, val)
#define bfin_read_TWI_CONTROL() bfin_read16(TWI0_CONTROL)
#define bfin_write_TWI_CONTROL(val) bfin_write16(TWI0_CONTROL, val)
#define bfin_read_TWI_SLAVE_CTRL() bfin_read16(TWI0_SLAVE_CTRL)
#define bfin_write_TWI_SLAVE_CTRL(val) bfin_write16(TWI0_SLAVE_CTRL, val)
#define bfin_read_TWI_SLAVE_STAT() bfin_read16(TWI0_SLAVE_STAT)
#define bfin_write_TWI_SLAVE_STAT(val) bfin_write16(TWI0_SLAVE_STAT, val)
#define bfin_read_TWI_SLAVE_ADDR() bfin_read16(TWI0_SLAVE_ADDR)
#define bfin_write_TWI_SLAVE_ADDR(val) bfin_write16(TWI0_SLAVE_ADDR, val)
#define bfin_read_TWI_MASTER_CTL() bfin_read16(TWI0_MASTER_CTRL)
#define bfin_write_TWI_MASTER_CTL(val) bfin_write16(TWI0_MASTER_CTRL, val)
#define bfin_read_TWI_MASTER_STAT() bfin_read16(TWI0_MASTER_STAT)
#define bfin_write_TWI_MASTER_STAT(val) bfin_write16(TWI0_MASTER_STAT, val)
#define bfin_read_TWI_MASTER_ADDR() bfin_read16(TWI0_MASTER_ADDR)
#define bfin_write_TWI_MASTER_ADDR(val) bfin_write16(TWI0_MASTER_ADDR, val)
#define bfin_read_TWI_INT_STAT() bfin_read16(TWI0_INT_STAT)
#define bfin_write_TWI_INT_STAT(val) bfin_write16(TWI0_INT_STAT, val)
#define bfin_read_TWI_INT_MASK() bfin_read16(TWI0_INT_MASK)
#define bfin_write_TWI_INT_MASK(val) bfin_write16(TWI0_INT_MASK, val)
#define bfin_read_TWI_FIFO_CTL() bfin_read16(TWI0_FIFO_CTRL)
#define bfin_write_TWI_FIFO_CTL(val) bfin_write16(TWI0_FIFO_CTRL, val)
#define bfin_read_TWI_FIFO_STAT() bfin_read16(TWI0_FIFO_STAT)
#define bfin_write_TWI_FIFO_STAT(val) bfin_write16(TWI0_FIFO_STAT, val)
#define bfin_read_TWI_XMT_DATA8() bfin_read16(TWI0_XMT_DATA8)
#define bfin_write_TWI_XMT_DATA8(val) bfin_write16(TWI0_XMT_DATA8, val)
#define bfin_read_TWI_XMT_DATA16() bfin_read16(TWI0_XMT_DATA16)
#define bfin_write_TWI_XMT_DATA16(val) bfin_write16(TWI0_XMT_DATA16, val)
#define bfin_read_TWI_RCV_DATA8() bfin_read16(TWI0_RCV_DATA8)
#define bfin_write_TWI_RCV_DATA8(val) bfin_write16(TWI0_RCV_DATA8, val)
#define bfin_read_TWI_RCV_DATA16() bfin_read16(TWI0_RCV_DATA16)
#define bfin_write_TWI_RCV_DATA16(val) bfin_write16(TWI0_RCV_DATA16, val)
/* SPORT0 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 bfin_read_()rocessors */ /* SPORT0 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 bfin_read_()rocessors */
/* SPORT1 Registers */ /* SPORT1 Registers */
......
...@@ -112,6 +112,7 @@ Events (highest priority) EMU 0 ...@@ -112,6 +112,7 @@ Events (highest priority) EMU 0
#define IRQ_ATAPI_TX BFIN_IRQ(44) /* ATAPI TX (DMA11) Interrupt */ #define IRQ_ATAPI_TX BFIN_IRQ(44) /* ATAPI TX (DMA11) Interrupt */
#define IRQ_TWI0 BFIN_IRQ(45) /* TWI0 Interrupt */ #define IRQ_TWI0 BFIN_IRQ(45) /* TWI0 Interrupt */
#define IRQ_TWI1 BFIN_IRQ(46) /* TWI1 Interrupt */ #define IRQ_TWI1 BFIN_IRQ(46) /* TWI1 Interrupt */
#define IRQ_TWI IRQ_TWI0 /* TWI Interrupt */
#define IRQ_CAN0_RX BFIN_IRQ(47) /* CAN0 Receive Interrupt */ #define IRQ_CAN0_RX BFIN_IRQ(47) /* CAN0 Receive Interrupt */
#define IRQ_CAN0_TX BFIN_IRQ(48) /* CAN0 Transmit Interrupt */ #define IRQ_CAN0_TX BFIN_IRQ(48) /* CAN0 Transmit Interrupt */
#define IRQ_MDMAS2 BFIN_IRQ(49) /* MDMA Stream 2 Interrupt */ #define IRQ_MDMAS2 BFIN_IRQ(49) /* MDMA Stream 2 Interrupt */
......
...@@ -81,6 +81,12 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) ...@@ -81,6 +81,12 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val)
#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT,val) #define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT,val)
#define bfin_read_CHIPID() bfin_read32(CHIPID) #define bfin_read_CHIPID() bfin_read32(CHIPID)
/* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */
#define bfin_read_SWRST() bfin_read_SICA_SWRST()
#define bfin_write_SWRST() bfin_write_SICA_SWRST()
#define bfin_read_SYSCR() bfin_read_SICA_SYSCR()
#define bfin_write_SYSCR() bfin_write_SICA_SYSCR()
/* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */ /* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */
#define bfin_read_SICA_SWRST() bfin_read16(SICA_SWRST) #define bfin_read_SICA_SWRST() bfin_read16(SICA_SWRST)
#define bfin_write_SICA_SWRST(val) bfin_write16(SICA_SWRST,val) #define bfin_write_SICA_SWRST(val) bfin_write16(SICA_SWRST,val)
......
...@@ -52,6 +52,10 @@ ...@@ -52,6 +52,10 @@
#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register (16-bit) */ #define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register (16-bit) */
#define CHIPID 0xFFC00014 /* Chip ID Register */ #define CHIPID 0xFFC00014 /* Chip ID Register */
/* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */
#define SWRST SICA_SWRST
#define SYSCR SICA_SYSCR
/* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */ /* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */
#define SICA_SWRST 0xFFC00100 /* Software Reset register */ #define SICA_SWRST 0xFFC00100 /* Software Reset register */
#define SICA_SYSCR 0xFFC00104 /* System Reset Configuration register */ #define SICA_SYSCR 0xFFC00104 /* System Reset Configuration register */
......
...@@ -39,6 +39,11 @@ ...@@ -39,6 +39,11 @@
*/ */
#define ALIGN_PAGE_MASK 0xffffe000 #define ALIGN_PAGE_MASK 0xffffe000
/*
* Size of kernel stack for each process. This must be a power of 2...
*/
#define THREAD_SIZE 8192 /* 2 pages */
#ifndef __ASSEMBLY__ #ifndef __ASSEMBLY__
typedef unsigned long mm_segment_t; typedef unsigned long mm_segment_t;
...@@ -76,11 +81,6 @@ struct thread_info { ...@@ -76,11 +81,6 @@ struct thread_info {
#define init_thread_info (init_thread_union.thread_info) #define init_thread_info (init_thread_union.thread_info)
#define init_stack (init_thread_union.stack) #define init_stack (init_thread_union.stack)
/*
* Size of kernel stack for each process. This must be a power of 2...
*/
#define THREAD_SIZE 8192 /* 2 pages */
/* How to get the thread information struct from C */ /* How to get the thread information struct from C */
static inline struct thread_info *current_thread_info(void) static inline struct thread_info *current_thread_info(void)
...@@ -94,7 +94,7 @@ static inline struct thread_info *current_thread_info(void) ...@@ -94,7 +94,7 @@ static inline struct thread_info *current_thread_info(void)
struct thread_info *ti; struct thread_info *ti;
__asm__("%0 = sp;": "=&d"(ti): __asm__("%0 = sp;": "=&d"(ti):
); );
return (struct thread_info *)((long)ti & ~8191UL); return (struct thread_info *)((long)ti & ~((long)THREAD_SIZE-1));
} }
/* thread information allocation */ /* thread information allocation */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册