net: usb: aqc111: Add support for VLAN_CTAG_TX/RX offload

Signed-off-by: NDmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/usb/aqc111.c

@@ -452,6 +452,7 @@ static int aqc111_bind(struct usbnet *dev, struct usb_interface *intf)
 
 	dev->net->hw_features |= AQ_SUPPORT_HW_FEATURE;
 	dev->net->features |= AQ_SUPPORT_FEATURE;
+	dev->net->vlan_features |= AQ_SUPPORT_VLAN_FEATURE;
 
 	netif_set_gso_max_size(dev->net, 65535);
 
@@ -714,6 +715,7 @@ static int aqc111_reset(struct usbnet *dev)
 
 	dev->net->hw_features |= AQ_SUPPORT_HW_FEATURE;
 	dev->net->features |= AQ_SUPPORT_FEATURE;
+	dev->net->vlan_features |= AQ_SUPPORT_VLAN_FEATURE;
 
 	/* Power up ethernet PHY */
 	aqc111_data->phy_cfg = AQ_PHY_POWER_EN;
@@ -793,6 +795,7 @@ static int aqc111_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 	u32 desc_offset = 0; /*RX Header Offset*/
 	u16 pkt_count = 0;
 	u64 desc_hdr = 0;
+	u16 vlan_tag = 0;
 	u32 skb_len = 0;
 
 	if (!skb)
@@ -864,6 +867,12 @@ static int aqc111_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 		if (aqc111_data->rx_checksum)
 			aqc111_rx_checksum(new_skb, pkt_desc);
 
+		if (pkt_desc & AQ_RX_PD_VLAN) {
+			vlan_tag = pkt_desc >> AQ_RX_PD_VLAN_SHIFT;
+			__vlan_hwaccel_put_tag(new_skb, htons(ETH_P_8021Q),
+					       vlan_tag & VLAN_VID_MASK);
+		}
+
 		usbnet_skb_return(dev, new_skb);
 		if (pkt_count == 0)
 			break;
@@ -892,6 +901,7 @@ static struct sk_buff *aqc111_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
 	int headroom = 0;
 	int tailroom = 0;
 	u64 tx_desc = 0;
+	u16 tci = 0;
 
 	/*Length of actual data*/
 	tx_desc |= skb->len & AQ_TX_DESC_LEN_MASK;
@@ -909,6 +919,13 @@ static struct sk_buff *aqc111_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
 		tx_desc |= AQ_TX_DESC_DROP_PADD;
 	}
 
+	/* Vlan Tag */
+	if (vlan_get_tag(skb, &tci) >= 0) {
+		tx_desc |= AQ_TX_DESC_VLAN;
+		tx_desc |= ((u64)tci & AQ_TX_DESC_VLAN_MASK) <<
+			   AQ_TX_DESC_VLAN_SHIFT;
+	}
+
 	if (!dev->can_dma_sg && (dev->net->features & NETIF_F_SG) &&
 	    skb_linearize(skb))
 		return NULL;

drivers/net/usb/aqc111.h

@@ -26,12 +26,17 @@
 /* Feature. ********************************************/
 #define AQ_SUPPORT_FEATURE	(NETIF_F_SG | NETIF_F_IP_CSUM |\
 				 NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM |\
-				 NETIF_F_TSO)
+				 NETIF_F_TSO | NETIF_F_HW_VLAN_CTAG_TX |\
+				 NETIF_F_HW_VLAN_CTAG_RX)
 
 #define AQ_SUPPORT_HW_FEATURE	(NETIF_F_SG | NETIF_F_IP_CSUM |\
 				 NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM |\
 				 NETIF_F_TSO)
 
+#define AQ_SUPPORT_VLAN_FEATURE (NETIF_F_SG | NETIF_F_IP_CSUM |\
+				 NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM |\
+				 NETIF_F_TSO)
+
 /* SFR Reg. ********************************************/
 
 #define SFR_GENERAL_STATUS		0x03
@@ -168,8 +173,11 @@ struct aqc111_data {
 /* TX Descriptor */
 #define AQ_TX_DESC_LEN_MASK	0x1FFFFF
 #define AQ_TX_DESC_DROP_PADD	BIT(28)
+#define AQ_TX_DESC_VLAN		BIT(29)
 #define AQ_TX_DESC_MSS_MASK	0x7FFF
 #define AQ_TX_DESC_MSS_SHIFT	0x20
+#define AQ_TX_DESC_VLAN_MASK	0xFFFF
+#define AQ_TX_DESC_VLAN_SHIFT	0x30
 
 #define AQ_RX_HW_PAD			0x02
 
@@ -183,10 +191,12 @@ struct aqc111_data {
 #define AQ_RX_PD_L3_IP		0x20
 #define AQ_RX_PD_L3_IP6		0x40
 
+#define AQ_RX_PD_VLAN		BIT(10)
 #define AQ_RX_PD_RX_OK		BIT(11)
 #define AQ_RX_PD_DROP		BIT(31)
 #define AQ_RX_PD_LEN_MASK	0x7FFF0000
 #define AQ_RX_PD_LEN_SHIFT	0x10
+#define AQ_RX_PD_VLAN_SHIFT	0x20
 
 /* RX Descriptor header */
 #define AQ_RX_DH_PKT_CNT_MASK		0x1FFF