提交 749359f4 编写于 作者: G Gavi Teitz 提交者: Saeed Mahameed

net/mlx5e: Change VF representors' RQ type

The representors' RQ size was not large enough for them to achieve
high enough performance, and therefore needed to be enlarged, while
suffering a minimum hit to its memory usage. To achieve this the
representors RQ size was increased, and its type was changed to be a
striding RQ if it is supported.

Towards that goal the following changes were made:

* Extracted the sequence for setting the standard netdev's RQ parmas
  into a function

* Replaced the sequence for setting the representor's RQ params with
  the standard sequence

The impact of this change can be seen in the following measurements
taken on a setup of a VM over a VF, connected to OVS via the VF
representor, to an external host:

Before current change:
                     TCP Throughput [Gb/s]
VM to external host         ~  7.2

With the current change (measured with a striding RQ):
                     TCP Throughput [Gb/s]
VM to external host         ~ 23.5

Each representor now consumes 2 [MB] of memory for its packet
buffers.
Signed-off-by: NGavi Teitz <gavi@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
上级 3a95e0cc
......@@ -966,6 +966,8 @@ void mlx5e_destroy_netdev(struct mlx5e_priv *priv);
void mlx5e_build_nic_params(struct mlx5_core_dev *mdev,
struct mlx5e_params *params,
u16 max_channels, u16 mtu);
void mlx5e_build_rq_params(struct mlx5_core_dev *mdev,
struct mlx5e_params *params);
u8 mlx5e_params_calculate_tx_min_inline(struct mlx5_core_dev *mdev);
void mlx5e_rx_dim_work(struct work_struct *work);
void mlx5e_tx_dim_work(struct work_struct *work);
......
......@@ -4480,6 +4480,23 @@ static u32 mlx5e_choose_lro_timeout(struct mlx5_core_dev *mdev, u32 wanted_timeo
return MLX5_CAP_ETH(mdev, lro_timer_supported_periods[i]);
}
void mlx5e_build_rq_params(struct mlx5_core_dev *mdev,
struct mlx5e_params *params)
{
/* Prefer Striding RQ, unless any of the following holds:
* - Striding RQ configuration is not possible/supported.
* - Slow PCI heuristic.
* - Legacy RQ would use linear SKB while Striding RQ would use non-linear.
*/
if (!slow_pci_heuristic(mdev) &&
mlx5e_striding_rq_possible(mdev, params) &&
(mlx5e_rx_mpwqe_is_linear_skb(mdev, params) ||
!mlx5e_rx_is_linear_skb(mdev, params)))
MLX5E_SET_PFLAG(params, MLX5E_PFLAG_RX_STRIDING_RQ, true);
mlx5e_set_rq_type(mdev, params);
mlx5e_init_rq_type_params(mdev, params);
}
void mlx5e_build_nic_params(struct mlx5_core_dev *mdev,
struct mlx5e_params *params,
u16 max_channels, u16 mtu)
......@@ -4505,18 +4522,7 @@ void mlx5e_build_nic_params(struct mlx5_core_dev *mdev,
MLX5E_SET_PFLAG(params, MLX5E_PFLAG_RX_CQE_COMPRESS, params->rx_cqe_compress_def);
/* RQ */
/* Prefer Striding RQ, unless any of the following holds:
* - Striding RQ configuration is not possible/supported.
* - Slow PCI heuristic.
* - Legacy RQ would use linear SKB while Striding RQ would use non-linear.
*/
if (!slow_pci_heuristic(mdev) &&
mlx5e_striding_rq_possible(mdev, params) &&
(mlx5e_rx_mpwqe_is_linear_skb(mdev, params) ||
!mlx5e_rx_is_linear_skb(mdev, params)))
MLX5E_SET_PFLAG(params, MLX5E_PFLAG_RX_STRIDING_RQ, true);
mlx5e_set_rq_type(mdev, params);
mlx5e_init_rq_type_params(mdev, params);
mlx5e_build_rq_params(mdev, params);
/* HW LRO */
......
......@@ -46,8 +46,6 @@
#define MLX5E_REP_PARAMS_LOG_SQ_SIZE \
max(0x6, MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE)
#define MLX5E_REP_PARAMS_LOG_RQ_SIZE \
max(0x6, MLX5E_PARAMS_MINIMUM_LOG_RQ_SIZE)
static const char mlx5e_rep_driver_name[] = "mlx5e_rep";
......@@ -934,14 +932,15 @@ static void mlx5e_build_rep_params(struct mlx5_core_dev *mdev,
params->hard_mtu = MLX5E_ETH_HARD_MTU;
params->sw_mtu = mtu;
params->log_sq_size = MLX5E_REP_PARAMS_LOG_SQ_SIZE;
params->rq_wq_type = MLX5_WQ_TYPE_CYCLIC;
params->log_rq_mtu_frames = MLX5E_REP_PARAMS_LOG_RQ_SIZE;
/* RQ */
mlx5e_build_rq_params(mdev, params);
/* CQ moderation params */
params->rx_dim_enabled = MLX5_CAP_GEN(mdev, cq_moderation);
mlx5e_set_rx_cq_mode_params(params, cq_period_mode);
params->num_tc = 1;
params->lro_wqe_sz = MLX5E_PARAMS_DEFAULT_LRO_WQE_SZ;
mlx5_query_min_inline(mdev, &params->tx_min_inline_mode);
}
......@@ -1077,7 +1076,7 @@ static const struct mlx5e_profile mlx5e_rep_profile = {
.max_nch = mlx5e_get_rep_max_num_channels,
.update_carrier = NULL,
.rx_handlers.handle_rx_cqe = mlx5e_handle_rx_cqe_rep,
.rx_handlers.handle_rx_cqe_mpwqe = NULL /* Not supported */,
.rx_handlers.handle_rx_cqe_mpwqe = mlx5e_handle_rx_cqe_mpwrq,
.max_tc = 1,
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册