staging: Fix typo in multiple files

Collect spelling typo in multiple files within staging directory.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/bcm/Misc.c

@@ -835,7 +835,7 @@ int reset_card_proc(PMINI_ADAPTER ps_adapter)
 	Bcm_kill_all_URBs(psIntfAdapter);
 	/* Reset the UMA-B Device */
 	if (ps_adapter->chip_id >= T3LPB) {
-		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Reseting UMA-B\n");
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "Resetting UMA-B\n");
 		retval = usb_reset_device(psIntfAdapter->udev);
 		psIntfAdapter->psAdapter->StopAllXaction = FALSE;
 

drivers/staging/comedi/drivers/dt9812.c

@@ -715,7 +715,7 @@ static int dt9812_probe(struct usb_interface *interface,
 	iface_desc = interface->cur_altsetting;
 
 	if (iface_desc->desc.bNumEndpoints != 5) {
-		err("Wrong number of endpints.");
+		err("Wrong number of endpoints.");
 		retval = -ENODEV;
 		goto error;
 	}

drivers/staging/comedi/drivers/rtd520.c

@@ -353,7 +353,7 @@ struct rtdPrivate {
 
 	unsigned long intCount;	/* interrupt count */
 	long aiCount;		/* total transfer size (samples) */
-	int transCount;		/* # to tranfer data. 0->1/2FIFO */
+	int transCount;		/* # to transfer data. 0->1/2FIFO */
 	int flags;		/* flag event modes */
 
 	/* PCI device info */
@@ -1989,7 +1989,7 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 			    (TRANS_TARGET_PERIOD * cmd->chanlist_len) /
 			    cmd->scan_begin_arg;
 			if (devpriv->transCount < cmd->chanlist_len) {
-				/* tranfer after each scan (and avoid 0) */
+				/* transfer after each scan (and avoid 0) */
 				devpriv->transCount = cmd->chanlist_len;
 			} else {	/* make a multiple of scan length */
 				devpriv->transCount =
@@ -2005,12 +2005,12 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 			devpriv->transCount = 0;
 			devpriv->flags &= ~SEND_EOS;
 		} else {
-			/* interrupt for each tranfer */
+			/* interrupt for each transfer */
 			RtdAboutCounter(dev, devpriv->transCount - 1);
 		}
 
 		DPRINTK
-		    ("rtd520: scanLen=%d tranferCount=%d fifoLen=%d\n  scanTime(ns)=%d flags=0x%x\n",
+		    ("rtd520: scanLen=%d transferCount=%d fifoLen=%d\n  scanTime(ns)=%d flags=0x%x\n",
 		     cmd->chanlist_len, devpriv->transCount, devpriv->fifoLen,
 		     cmd->scan_begin_arg, devpriv->flags);
 	} else {		/* unknown timing, just use 1/2 FIFO */

drivers/staging/media/go7007/README

@@ -6,6 +6,6 @@ Todo:
 	- testing?
 	- handle churn in v4l layer.
 
-Please send patchs to Greg Kroah-Hartman <greg@kroah.com> and Cc: Ross
+Please send patches to Greg Kroah-Hartman <greg@linuxfoundation.org> and Cc: Ross
 Cohen <rcohen@snurgle.org> as well.
 

drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c

@@ -1905,7 +1905,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
 							}
 						}else{
 							ieee->softmac_stats.rx_auth_rs_err++;
-							IEEE80211_DEBUG_MGMT("Authentication respose status code 0x%x",errcode);
+							IEEE80211_DEBUG_MGMT("Authentication response status code 0x%x",errcode);
 							ieee80211_associate_abort(ieee);
 						}
 

drivers/staging/rtl8192e/rtl8192e/r8192E_firmware.c

@@ -216,7 +216,7 @@ static bool firmware_check_ready(struct net_device *dev,
 		break;
 	default:
 		rt_status = false;
-		RT_TRACE(COMP_FIRMWARE, "Unknown firware status");
+		RT_TRACE(COMP_FIRMWARE, "Unknown firmware status");
 		break;
 	}
 

drivers/staging/rtl8192e/rtl8192e/r8192E_phy.c

@@ -689,7 +689,7 @@ void rtl8192_phy_setTxPower(struct net_device *dev, u8 channel)
 	case RF_8258:
 		break;
 	default:
-		RT_TRACE(COMP_ERR, "unknown rf chip in funtion %s()\n",
+		RT_TRACE(COMP_ERR, "unknown rf chip in function %s()\n",
 			 __func__);
 		break;
 	}

drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c

@@ -671,7 +671,7 @@ void RxReorderIndicatePacket( struct ieee80211_device *ieee,
 		index = 1;
 	} else {
 		/* Current packet is going to be inserted into pending list.*/
-		//IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): We RX no ordered packed, insert to orderd list\n",__FUNCTION__);
+		//IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): We RX no ordered packed, insert to ordered list\n",__FUNCTION__);
 		if(!list_empty(&ieee->RxReorder_Unused_List)) {
 			pReorderEntry = (PRX_REORDER_ENTRY)list_entry(ieee->RxReorder_Unused_List.next,RX_REORDER_ENTRY,List);
 			list_del_init(&pReorderEntry->List);

drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c

@@ -2062,7 +2062,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
 							}
 						}else{
 							ieee->softmac_stats.rx_auth_rs_err++;
-							IEEE80211_DEBUG_MGMT("Authentication respose status code 0x%x",errcode);
+							IEEE80211_DEBUG_MGMT("Authentication response status code 0x%x",errcode);
 							ieee80211_associate_abort(ieee);
 						}
 

drivers/staging/tidspbridge/core/io_sm.c

@@ -2212,7 +2212,7 @@ void dump_dl_modules(struct bridge_dev_context *bridge_context)
 
 		if (status) {
 			pr_debug(
-			"%s: Failed to read dll_module stuct for 0x%x.\n",
+			"%s: Failed to read dll_module struct for 0x%x.\n",
 			__func__, module_dsp_addr);
 			break;
 		}

drivers/staging/tidspbridge/core/ue_deh.c

@@ -215,7 +215,7 @@ static inline const char *event_to_string(int event)
 	case DSP_MMUFAULT: return "DSP_MMUFAULT"; break;
 	case DSP_PWRERROR: return "DSP_PWRERROR"; break;
 	case DSP_WDTOVERFLOW: return "DSP_WDTOVERFLOW"; break;
-	default: return "unkown event"; break;
+	default: return "unknown event"; break;
 	}
 }
 

drivers/staging/usbip/usbip_protocol.txt

@@ -27,7 +27,7 @@ Once the client knows the list of exported USB devices it may decide to use one
 of them. First the client opens a TCP/IP connection towards the server and
 sends an OP_REQ_IMPORT packet. The server replies with OP_REP_IMPORT. If the
 import was successful the TCP/IP connection remains open and will be used
-to trasfer the URB traffic between the client and the server. The client may
+to transfer the URB traffic between the client and the server. The client may
 send two types of packets: the USBIP_CMD_SUBMIT to submit an URB, and
 USBIP_CMD_UNLINK to unlink a previously submitted URB. The answers of the
 server may be USBIP_RET_SUBMIT and USBIP_RET_UNLINK respectively.

drivers/staging/vme/devices/vme_pio2_gpio.c

@@ -79,7 +79,7 @@ static void pio2_gpio_set(struct gpio_chip *chip, unsigned int offset,
 	if ((card->bank[PIO2_CHANNEL_BANK[offset]].config == INPUT) |
 		(card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) {
 
-		dev_err(&card->vdev->dev, "Channel not availabe as output\n");
+		dev_err(&card->vdev->dev, "Channel not available as output\n");
 		return;
 	}