提交 6c7377ab 编写于 作者: K Kay Sievers 提交者: Greg Kroah-Hartman

spi: struct device - replace bus_id with dev_name(), dev_set_name()

Cc: dbrownell@users.sourceforge.net
Cc: spi-devel-general@lists.sourceforge.net
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
上级 031d5518
......@@ -322,7 +322,7 @@ static void atmel_spi_next_message(struct spi_master *master)
spi = msg->spi;
dev_dbg(master->dev.parent, "start message %p for %s\n",
msg, spi->dev.bus_id);
msg, dev_name(&spi->dev));
/* select chip if it's not still active */
if (as->stay) {
......@@ -627,7 +627,7 @@ static int atmel_spi_setup(struct spi_device *spi)
if (!asd)
return -ENOMEM;
ret = gpio_request(npcs_pin, spi->dev.bus_id);
ret = gpio_request(npcs_pin, dev_name(&spi->dev));
if (ret) {
kfree(asd);
return ret;
......@@ -668,7 +668,7 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg)
as = spi_master_get_devdata(spi->master);
dev_dbg(controller, "new message %p submitted for %s\n",
msg, spi->dev.bus_id);
msg, dev_name(&spi->dev));
if (unlikely(list_empty(&msg->transfers)))
return -EINVAL;
......@@ -803,7 +803,7 @@ static int __init atmel_spi_probe(struct platform_device *pdev)
as->clk = clk;
ret = request_irq(irq, atmel_spi_interrupt, 0,
pdev->dev.bus_id, master);
dev_name(&pdev->dev), master);
if (ret)
goto out_unmap_regs;
......
......@@ -429,7 +429,7 @@ static int __init mpc52xx_psc_spi_do_probe(struct device *dev, u32 regaddr,
INIT_LIST_HEAD(&mps->queue);
mps->workqueue = create_singlethread_workqueue(
master->dev.parent->bus_id);
dev_name(master->dev.parent));
if (mps->workqueue == NULL) {
ret = -EBUSY;
goto free_irq;
......
......@@ -1003,7 +1003,7 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev)
goto err1;
}
if (!request_mem_region(r->start, (r->end - r->start) + 1,
pdev->dev.bus_id)) {
dev_name(&pdev->dev))) {
status = -EBUSY;
goto err1;
}
......
......@@ -245,7 +245,7 @@ static int uwire_txrx(struct spi_device *spi, struct spi_transfer *t)
#ifdef VERBOSE
pr_debug("%s: write-%d =%04x\n",
spi->dev.bus_id, bits, val);
dev_name(&spi->dev), bits, val);
#endif
if (wait_uwire_csr_flag(CSRB, 0, 0))
goto eio;
......@@ -305,7 +305,7 @@ static int uwire_txrx(struct spi_device *spi, struct spi_transfer *t)
status += bytes;
#ifdef VERBOSE
pr_debug("%s: read-%d =%04x\n",
spi->dev.bus_id, bits, val);
dev_name(&spi->dev), bits, val);
#endif
}
......@@ -331,7 +331,7 @@ static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
uwire = spi_master_get_devdata(spi->master);
if (spi->chip_select > 3) {
pr_debug("%s: cs%d?\n", spi->dev.bus_id, spi->chip_select);
pr_debug("%s: cs%d?\n", dev_name(&spi->dev), spi->chip_select);
status = -ENODEV;
goto done;
}
......@@ -343,7 +343,7 @@ static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
bits = 8;
if (bits > 16) {
pr_debug("%s: wordsize %d?\n", spi->dev.bus_id, bits);
pr_debug("%s: wordsize %d?\n", dev_name(&spi->dev), bits);
status = -ENODEV;
goto done;
}
......@@ -378,7 +378,7 @@ static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
hz = t->speed_hz;
if (!hz) {
pr_debug("%s: zero speed?\n", spi->dev.bus_id);
pr_debug("%s: zero speed?\n", dev_name(&spi->dev));
status = -EINVAL;
goto done;
}
......@@ -406,7 +406,7 @@ static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
}
if (div1_idx == 4) {
pr_debug("%s: lowest clock %ld, need %d\n",
spi->dev.bus_id, rate / 10 / 8, hz);
dev_name(&spi->dev), rate / 10 / 8, hz);
status = -EDOM;
goto done;
}
......
......@@ -496,7 +496,7 @@ static int __init orion_spi_probe(struct platform_device *pdev)
}
if (!request_mem_region(r->start, (r->end - r->start) + 1,
pdev->dev.bus_id)) {
dev_name(&pdev->dev))) {
status = -EBUSY;
goto out;
}
......
......@@ -1333,7 +1333,7 @@ static int __init init_queue(struct driver_data *drv_data)
INIT_WORK(&drv_data->pump_messages, pump_messages);
drv_data->workqueue = create_singlethread_workqueue(
drv_data->master->dev.parent->bus_id);
dev_name(drv_data->master->dev.parent));
if (drv_data->workqueue == NULL)
return -EBUSY;
......@@ -1462,7 +1462,7 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR;
}
status = request_irq(ssp->irq, ssp_int, 0, dev->bus_id, drv_data);
status = request_irq(ssp->irq, ssp_int, 0, dev_name(dev), drv_data);
if (status < 0) {
dev_err(&pdev->dev, "cannot get IRQ %d\n", ssp->irq);
goto out_error_master_alloc;
......
......@@ -1160,8 +1160,8 @@ static inline int init_queue(struct driver_data *drv_data)
/* init messages workqueue */
INIT_WORK(&drv_data->pump_messages, pump_messages);
drv_data->workqueue =
create_singlethread_workqueue(drv_data->master->dev.parent->bus_id);
drv_data->workqueue = create_singlethread_workqueue(
dev_name(drv_data->master->dev.parent));
if (drv_data->workqueue == NULL)
return -EBUSY;
......
......@@ -191,7 +191,7 @@ static int spi_gpio_setup(struct spi_device *spi)
return -EINVAL;
if (!spi->controller_state) {
status = gpio_request(cs, spi->dev.bus_id);
status = gpio_request(cs, dev_name(&spi->dev));
if (status)
return status;
status = gpio_direction_output(cs, spi->mode & SPI_CS_HIGH);
......
......@@ -1381,7 +1381,7 @@ static int __init init_queue(struct driver_data *drv_data)
INIT_WORK(&drv_data->work, pump_messages);
drv_data->workqueue = create_singlethread_workqueue(
drv_data->master->dev.parent->bus_id);
dev_name(drv_data->master->dev.parent));
if (drv_data->workqueue == NULL)
return -EBUSY;
......@@ -1525,7 +1525,8 @@ static int __init spi_imx_probe(struct platform_device *pdev)
status = -ENODEV;
goto err_no_irqres;
}
status = request_irq(irq, spi_int, IRQF_DISABLED, dev->bus_id, drv_data);
status = request_irq(irq, spi_int, IRQF_DISABLED,
dev_name(dev), drv_data);
if (status < 0) {
dev_err(&pdev->dev, "probe - cannot get IRQ (%d)\n", status);
goto err_no_irqres;
......
......@@ -637,7 +637,7 @@ static int __init mpc83xx_spi_probe(struct platform_device *dev)
INIT_LIST_HEAD(&mpc83xx_spi->queue);
mpc83xx_spi->workqueue = create_singlethread_workqueue(
master->dev.parent->bus_id);
dev_name(master->dev.parent));
if (mpc83xx_spi->workqueue == NULL) {
ret = -EBUSY;
goto free_irq;
......@@ -649,7 +649,7 @@ static int __init mpc83xx_spi_probe(struct platform_device *dev)
printk(KERN_INFO
"%s: MPC83xx SPI Controller driver at 0x%p (irq = %d)\n",
dev->dev.bus_id, mpc83xx_spi->base, mpc83xx_spi->irq);
dev_name(&dev->dev), mpc83xx_spi->base, mpc83xx_spi->irq);
return ret;
......
......@@ -404,7 +404,8 @@ static int __init txx9spi_probe(struct platform_device *dev)
if (ret)
goto exit;
c->workqueue = create_singlethread_workqueue(master->dev.parent->bus_id);
c->workqueue = create_singlethread_workqueue(
dev_name(master->dev.parent));
if (!c->workqueue)
goto exit_busy;
c->last_chipselect = -1;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册