提交 6c3af955 编写于 作者: H Horia Geant? 提交者: Herbert Xu

crypto: caam - add support for LS1021A

LS1021A is a QorIQ SoC having little endian CAAM.

There are a few differences b/w QorIQ and i.MX from CAAM perspective:

1. i.MX platforms are somewhat special wrt. 64-bit registers:
-big endian format at 64-bit level: MSW at address+0 and LSW at address+4
-little endian format at 32-bit level (within MSW and LSW)
and thus need special handling.

2. No CCM (clock controller module) for QorIQ.
No CAAM clocks to enable / disable.

A new Kconfig option - CRYPTO_DEV_FSL_CAAM_LE - is added to indicate
CAAM is little endian (*). It is hidden from the user (to avoid
misconfiguration); when adding support for a new platform with LE CAAM,
either the Kconfig needs to be updated or the corresponding defconfig
needs to indicate that CAAM is LE.
(*) Using a DT property to provide CAAM endianness would not allow
for the ifdeffery.

In order to keep changes to a minimum, the following changes
are postponed:
-endianness fix of the last word in the S/G (rsvd2, bpid, offset),
fields are always 0 anyway;
-S/G format fix for i.MX7 (yes, i.MX7 support was not added yet,
but still...)
Signed-off-by: NHoria Geant? <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
上级 c1ae632a
......@@ -112,6 +112,14 @@ config CRYPTO_DEV_FSL_CAAM_RNG_API
To compile this as a module, choose M here: the module
will be called caamrng.
config CRYPTO_DEV_FSL_CAAM_IMX
def_bool SOC_IMX6 || SOC_IMX7D
depends on CRYPTO_DEV_FSL_CAAM
config CRYPTO_DEV_FSL_CAAM_LE
def_bool CRYPTO_DEV_FSL_CAAM_IMX || SOC_LS1021A
depends on CRYPTO_DEV_FSL_CAAM
config CRYPTO_DEV_FSL_CAAM_DEBUG
bool "Enable debug output in CAAM driver"
depends on CRYPTO_DEV_FSL_CAAM
......
......@@ -16,10 +16,10 @@
#include "error.h"
/*
* ARM targets tend to have clock control subsystems that can
* i.MX targets tend to have clock control subsystems that can
* enable/disable clocking to our device.
*/
#ifdef CONFIG_ARM
#ifdef CONFIG_CRYPTO_DEV_FSL_CAAM_IMX
static inline struct clk *caam_drv_identify_clk(struct device *dev,
char *clk_name)
{
......
......@@ -23,12 +23,12 @@
#define SEC4_SG_OFFS_MASK 0x00001fff
struct sec4_sg_entry {
#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
dma_addr_t ptr;
#else
#ifdef CONFIG_CRYPTO_DEV_FSL_CAAM_IMX
u32 rsvd1;
dma_addr_t ptr;
#endif
#else
u64 ptr;
#endif /* CONFIG_CRYPTO_DEV_FSL_CAAM_IMX */
u32 len;
u8 rsvd2;
u8 buf_pool_id;
......
......@@ -108,20 +108,31 @@
/*
* The only users of these wr/rd_reg64 functions is the Job Ring (JR).
* The DMA address registers in the JR are a pair of 32-bit registers.
* The layout is:
* The DMA address registers in the JR are handled differently depending on
* platform:
*
* 1. All BE CAAM platforms and i.MX platforms (LE CAAM):
*
* base + 0x0000 : most-significant 32 bits
* base + 0x0004 : least-significant 32 bits
*
* The 32-bit version of this core therefore has to write to base + 0x0004
* to set the 32-bit wide DMA address. This seems to be independent of the
* endianness of the written/read data.
* to set the 32-bit wide DMA address.
*
* 2. All other LE CAAM platforms (LS1021A etc.)
* base + 0x0000 : least-significant 32 bits
* base + 0x0004 : most-significant 32 bits
*/
#ifndef CONFIG_64BIT
#if !defined(CONFIG_CRYPTO_DEV_FSL_CAAM_LE) || \
defined(CONFIG_CRYPTO_DEV_FSL_CAAM_IMX)
#define REG64_MS32(reg) ((u32 __iomem *)(reg))
#define REG64_LS32(reg) ((u32 __iomem *)(reg) + 1)
#else
#define REG64_MS32(reg) ((u32 __iomem *)(reg) + 1)
#define REG64_LS32(reg) ((u32 __iomem *)(reg))
#endif
static inline void wr_reg64(u64 __iomem *reg, u64 data)
{
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册