net: stmmac: configure tx queue weight

This patch adds TX queues weight programming.
Signed-off-by: NJoao Pinto <jpinto@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/stmicro/stmmac/common.h

@@ -462,6 +462,9 @@ struct stmmac_ops {
 	void (*prog_mtl_rx_algorithms)(struct mac_device_info *hw, u32 rx_alg);
 	/* Program TX Algorithms */
 	void (*prog_mtl_tx_algorithms)(struct mac_device_info *hw, u32 tx_alg);
+	/* Set MTL TX queues weight */
+	void (*set_mtl_tx_queue_weight)(struct mac_device_info *hw,
+					u32 weight, u32 queue);
 	/* Dump MAC registers */
 	void (*dump_regs)(struct mac_device_info *hw, u32 *reg_space);
 	/* Handle extra events on specific interrupts hw dependent */

drivers/net/ethernet/stmicro/stmmac/dwmac4.h

@@ -226,6 +226,13 @@ enum power_event {
 #define MTL_OP_MODE_RTC_96		(2 << MTL_OP_MODE_RTC_SHIFT)
 #define MTL_OP_MODE_RTC_128		(3 << MTL_OP_MODE_RTC_SHIFT)
 
+/* MTL Queue Quantum Weight */
+#define MTL_TXQ_WEIGHT_BASE_ADDR	0x00000d18
+#define MTL_TXQ_WEIGHT_BASE_OFFSET	0x40
+#define MTL_TXQX_WEIGHT_BASE_ADDR(x)	(MTL_TXQ_WEIGHT_BASE_ADDR + \
+					((x) * MTL_TXQ_WEIGHT_BASE_OFFSET))
+#define MTL_TXQ_WEIGHT_ISCQW_MASK	GENMASK(20, 0)
+
 /*  MTL debug */
 #define MTL_DEBUG_TXSTSFSTS		BIT(5)
 #define MTL_DEBUG_TXFSTS		BIT(4)

drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c

@@ -116,6 +116,17 @@ static void dwmac4_prog_mtl_tx_algorithms(struct mac_device_info *hw,
 	}
 }
 
+static void dwmac4_set_mtl_tx_queue_weight(struct mac_device_info *hw,
+					   u32 weight, u32 queue)
+{
+	void __iomem *ioaddr = hw->pcsr;
+	u32 value = readl(ioaddr + MTL_TXQX_WEIGHT_BASE_ADDR(queue));
+
+	value &= ~MTL_TXQ_WEIGHT_ISCQW_MASK;
+	value |= weight & MTL_TXQ_WEIGHT_ISCQW_MASK;
+	writel(value, ioaddr + MTL_TXQX_WEIGHT_BASE_ADDR(queue));
+}
+
 static void dwmac4_dump_regs(struct mac_device_info *hw, u32 *reg_space)
 {
 	void __iomem *ioaddr = hw->pcsr;
@@ -505,6 +516,7 @@ static const struct stmmac_ops dwmac4_ops = {
 	.rx_queue_enable = dwmac4_rx_queue_enable,
 	.prog_mtl_rx_algorithms = dwmac4_prog_mtl_rx_algorithms,
 	.prog_mtl_tx_algorithms = dwmac4_prog_mtl_tx_algorithms,
+	.set_mtl_tx_queue_weight = dwmac4_set_mtl_tx_queue_weight,
 	.dump_regs = dwmac4_dump_regs,
 	.host_irq_status = dwmac4_irq_status,
 	.flow_ctrl = dwmac4_flow_ctrl,

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

@@ -1647,6 +1647,23 @@ static void stmmac_init_tx_coalesce(struct stmmac_priv *priv)
 	add_timer(&priv->txtimer);
 }
 
+/**
+ *  stmmac_set_tx_queue_weight - Set TX queue weight
+ *  @priv: driver private structure
+ *  Description: It is used for setting TX queues weight
+ */
+static void stmmac_set_tx_queue_weight(struct stmmac_priv *priv)
+{
+	u32 tx_queues_count = priv->plat->tx_queues_to_use;
+	u32 weight;
+	u32 queue;
+
+	for (queue = 0; queue < tx_queues_count; queue++) {
+		weight = priv->plat->tx_queues_cfg[queue].weight;
+		priv->hw->mac->set_mtl_tx_queue_weight(priv->hw, weight, queue);
+	}
+}
+
 /**
  *  stmmac_mtl_configuration - Configure MTL
  *  @priv: driver private structure
@@ -1657,6 +1674,9 @@ static void stmmac_mtl_configuration(struct stmmac_priv *priv)
 	u32 rx_queues_count = priv->plat->rx_queues_to_use;
 	u32 tx_queues_count = priv->plat->tx_queues_to_use;
 
+	if (tx_queues_count > 1 && priv->hw->mac->set_mtl_tx_queue_weight)
+		stmmac_set_tx_queue_weight(priv);
+
 	/* Configure MTL RX algorithms */
 	if (rx_queues_count > 1 && priv->hw->mac->prog_mtl_rx_algorithms)
 		priv->hw->mac->prog_mtl_rx_algorithms(priv->hw,