提交 6316ea6d 编写于 作者: S Satish Baddipadige 提交者: David S. Miller

bnxt_en: Enable AER support.

Add pci_error_handler callbacks to support for pcie advanced error
recovery.
Signed-off-by: NSatish Baddipadige <sbaddipa@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 8ddc9aaa
......@@ -5412,6 +5412,8 @@ static int bnxt_init_board(struct pci_dev *pdev, struct net_device *dev)
goto init_err_release;
}
pci_enable_pcie_error_reporting(pdev);
INIT_WORK(&bp->sp_task, bnxt_sp_task);
spin_lock_init(&bp->ntp_fltr_lock);
......@@ -5791,6 +5793,7 @@ static void bnxt_remove_one(struct pci_dev *pdev)
if (BNXT_PF(bp))
bnxt_sriov_disable(bp);
pci_disable_pcie_error_reporting(pdev);
unregister_netdev(dev);
cancel_work_sync(&bp->sp_task);
bp->sp_event = 0;
......@@ -6030,11 +6033,117 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
return rc;
}
/**
* bnxt_io_error_detected - called when PCI error is detected
* @pdev: Pointer to PCI device
* @state: The current pci connection state
*
* This function is called after a PCI bus error affecting
* this device has been detected.
*/
static pci_ers_result_t bnxt_io_error_detected(struct pci_dev *pdev,
pci_channel_state_t state)
{
struct net_device *netdev = pci_get_drvdata(pdev);
netdev_info(netdev, "PCI I/O error detected\n");
rtnl_lock();
netif_device_detach(netdev);
if (state == pci_channel_io_perm_failure) {
rtnl_unlock();
return PCI_ERS_RESULT_DISCONNECT;
}
if (netif_running(netdev))
bnxt_close(netdev);
pci_disable_device(pdev);
rtnl_unlock();
/* Request a slot slot reset. */
return PCI_ERS_RESULT_NEED_RESET;
}
/**
* bnxt_io_slot_reset - called after the pci bus has been reset.
* @pdev: Pointer to PCI device
*
* Restart the card from scratch, as if from a cold-boot.
* At this point, the card has exprienced a hard reset,
* followed by fixups by BIOS, and has its config space
* set up identically to what it was at cold boot.
*/
static pci_ers_result_t bnxt_io_slot_reset(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct bnxt *bp = netdev_priv(netdev);
int err = 0;
pci_ers_result_t result = PCI_ERS_RESULT_DISCONNECT;
netdev_info(bp->dev, "PCI Slot Reset\n");
rtnl_lock();
if (pci_enable_device(pdev)) {
dev_err(&pdev->dev,
"Cannot re-enable PCI device after reset.\n");
} else {
pci_set_master(pdev);
if (netif_running(netdev))
err = bnxt_open(netdev);
if (!err)
result = PCI_ERS_RESULT_RECOVERED;
}
if (result != PCI_ERS_RESULT_RECOVERED && netif_running(netdev))
dev_close(netdev);
rtnl_unlock();
err = pci_cleanup_aer_uncorrect_error_status(pdev);
if (err) {
dev_err(&pdev->dev,
"pci_cleanup_aer_uncorrect_error_status failed 0x%0x\n",
err); /* non-fatal, continue */
}
return PCI_ERS_RESULT_RECOVERED;
}
/**
* bnxt_io_resume - called when traffic can start flowing again.
* @pdev: Pointer to PCI device
*
* This callback is called when the error recovery driver tells
* us that its OK to resume normal operation.
*/
static void bnxt_io_resume(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
rtnl_lock();
netif_device_attach(netdev);
rtnl_unlock();
}
static const struct pci_error_handlers bnxt_err_handler = {
.error_detected = bnxt_io_error_detected,
.slot_reset = bnxt_io_slot_reset,
.resume = bnxt_io_resume
};
static struct pci_driver bnxt_pci_driver = {
.name = DRV_MODULE_NAME,
.id_table = bnxt_pci_tbl,
.probe = bnxt_init_one,
.remove = bnxt_remove_one,
.err_handler = &bnxt_err_handler,
#if defined(CONFIG_BNXT_SRIOV)
.sriov_configure = bnxt_sriov_configure,
#endif
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册