提交 62fa19d4 编写于 作者: R Ryan Grimm 提交者: Michael Ellerman

cxl: Add ability to reset the card

Adds reset to sysfs which will PERST the card. If load_image_on_perst is set
to "user" or "factory", the PERST will cause that image to be loaded.

load_image_on_perst is set to "user" for production.

"none" could be used for debugging. The PSL trace arrays are preserved which
then can be read through debugfs.

PERST also triggers CAPP recovery. An HMI comes in, which is handled by EEH.
EEH unbinds the driver, calls into Sapphire to reinitialize the PHB, then
rebinds the driver.
Signed-off-by: NRyan Grimm <grimm@linux.vnet.ibm.com>
Acked-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
上级 1212aa1c
......@@ -146,3 +146,10 @@ Description: read/write
user or factory image to be loaded.
Default is to reload on PERST whichever image the card has
loaded.
What: /sys/class/cxl/<card>/reset
Date: October 2014
Contact: linuxppc-dev@lists.ozlabs.org
Description: write only
Writing 1 will issue a PERST to card which may cause the card
to reload the FPGA depending on load_image_on_perst.
......@@ -489,6 +489,7 @@ int cxl_alloc_irq_ranges(struct cxl_irq_ranges *irqs, struct cxl *adapter, unsig
void cxl_release_irq_ranges(struct cxl_irq_ranges *irqs, struct cxl *adapter);
int cxl_setup_irq(struct cxl *adapter, unsigned int hwirq, unsigned int virq);
int cxl_update_image_control(struct cxl *adapter);
int cxl_reset(struct cxl *adapter);
/* common == phyp + powernv */
struct cxl_process_element_common {
......
......@@ -21,6 +21,7 @@
#include <asm/msi_bitmap.h>
#include <asm/pci-bridge.h> /* for struct pci_controller */
#include <asm/pnv-pci.h>
#include <asm/io.h>
#include "cxl.h"
......@@ -741,6 +742,42 @@ static void cxl_remove_afu(struct cxl_afu *afu)
device_unregister(&afu->dev);
}
int cxl_reset(struct cxl *adapter)
{
struct pci_dev *dev = to_pci_dev(adapter->dev.parent);
int rc;
int i;
u32 val;
dev_info(&dev->dev, "CXL reset\n");
for (i = 0; i < adapter->slices; i++)
cxl_remove_afu(adapter->afu[i]);
/* pcie_warm_reset requests a fundamental pci reset which includes a
* PERST assert/deassert. PERST triggers a loading of the image
* if "user" or "factory" is selected in sysfs */
if ((rc = pci_set_pcie_reset_state(dev, pcie_warm_reset))) {
dev_err(&dev->dev, "cxl: pcie_warm_reset failed\n");
return rc;
}
/* the PERST done above fences the PHB. So, reset depends on EEH
* to unbind the driver, tell Sapphire to reinit the PHB, and rebind
* the driver. Do an mmio read explictly to ensure EEH notices the
* fenced PHB. Retry for a few seconds before giving up. */
i = 0;
while (((val = mmio_read32be(adapter->p1_mmio)) != 0xffffffff) &&
(i < 5)) {
msleep(500);
i++;
}
if (val != 0xffffffff)
dev_err(&dev->dev, "cxl: PERST failed to trigger EEH\n");
return rc;
}
static int cxl_map_adapter_regs(struct cxl *adapter, struct pci_dev *dev)
{
......
......@@ -56,6 +56,23 @@ static ssize_t image_loaded_show(struct device *device,
return scnprintf(buf, PAGE_SIZE, "factory\n");
}
static ssize_t reset_adapter_store(struct device *device,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct cxl *adapter = to_cxl_adapter(device);
int rc;
int val;
rc = sscanf(buf, "%i", &val);
if ((rc != 1) || (val != 1))
return -EINVAL;
if ((rc = cxl_reset(adapter)))
return rc;
return count;
}
static ssize_t load_image_on_perst_show(struct device *device,
struct device_attribute *attr,
char *buf)
......@@ -100,6 +117,7 @@ static struct device_attribute adapter_attrs[] = {
__ATTR_RO(base_image),
__ATTR_RO(image_loaded),
__ATTR_RW(load_image_on_perst),
__ATTR(reset, S_IWUSR, NULL, reset_adapter_store),
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册