提交 5b1e7f9e 编写于 作者: P Petr Machata 提交者: David S. Miller

selftests: forwarding: Test routed bridge interface

Add test for cases where bridge itself acts as a router interface, with
front panel port attached to the bridge in question.

In the first test (router_bridge.sh), VLAN memberships are not
configured in any way, and everything uses default PVID of 1. Thus
traffic in $h1 and $h2 is untagged. This test ensures that the previous
patches didn't break a currently working scenario.

In the second test (router_bridge_vlan.sh), a VLAN 555 pvid untagged is
added to the bridge CPU port, with that VLAN leaving the bridge tagged
through its sole member port. The traffic is therefore expected to come
out tagged at $h1. This tests the fix introduced in the previous
patches.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 567ad1a2
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
ALL_TESTS="
ping_ipv4
ping_ipv6
"
NUM_NETIFS=4
source lib.sh
h1_create()
{
simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
ip -4 route add 192.0.2.128/28 vrf v$h1 nexthop via 192.0.2.2
ip -6 route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2
}
h1_destroy()
{
ip -6 route del 2001:db8:2::/64 vrf v$h1
ip -4 route del 192.0.2.128/28 vrf v$h1
simple_if_fini $h1 192.0.2.1/28 2001:db8:1::1/64
}
h2_create()
{
simple_if_init $h2 192.0.2.130/28 2001:db8:2::2/64
ip -4 route add 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.129
ip -6 route add 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::1
}
h2_destroy()
{
ip -6 route del 2001:db8:1::/64 vrf v$h2
ip -4 route del 192.0.2.0/28 vrf v$h2
simple_if_fini $h2 192.0.2.130/28 2001:db8:2::2/64
}
router_create()
{
ip link add name br1 type bridge vlan_filtering 1
ip link set dev br1 up
ip link set dev $swp1 master br1
ip link set dev $swp1 up
__addr_add_del br1 add 192.0.2.2/28 2001:db8:1::2/64
ip link set dev $swp2 up
__addr_add_del $swp2 add 192.0.2.129/28 2001:db8:2::1/64
}
router_destroy()
{
__addr_add_del $swp2 del 192.0.2.129/28 2001:db8:2::1/64
ip link set dev $swp2 down
__addr_add_del br1 del 192.0.2.2/28 2001:db8:1::2/64
ip link set dev $swp1 down
ip link set dev $swp1 nomaster
ip link del dev br1
}
setup_prepare()
{
h1=${NETIFS[p1]}
swp1=${NETIFS[p2]}
swp2=${NETIFS[p3]}
h2=${NETIFS[p4]}
vrf_prepare
h1_create
h2_create
router_create
forwarding_enable
}
cleanup()
{
pre_cleanup
forwarding_restore
router_destroy
h2_destroy
h1_destroy
vrf_cleanup
}
ping_ipv4()
{
ping_test $h1 192.0.2.130
}
ping_ipv6()
{
ping6_test $h1 2001:db8:2::2
}
trap cleanup EXIT
setup_prepare
setup_wait
tests_run
exit $EXIT_STATUS
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
ALL_TESTS="
ping_ipv4
ping_ipv6
vlan
"
NUM_NETIFS=4
source lib.sh
h1_create()
{
simple_if_init $h1
vlan_create $h1 555 v$h1 192.0.2.1/28 2001:db8:1::1/64
ip -4 route add 192.0.2.128/28 vrf v$h1 nexthop via 192.0.2.2
ip -6 route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2
}
h1_destroy()
{
ip -6 route del 2001:db8:2::/64 vrf v$h1
ip -4 route del 192.0.2.128/28 vrf v$h1
vlan_destroy $h1 555
simple_if_fini $h1
}
h2_create()
{
simple_if_init $h2 192.0.2.130/28 2001:db8:2::2/64
ip -4 route add 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.129
ip -6 route add 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::1
}
h2_destroy()
{
ip -6 route del 2001:db8:1::/64 vrf v$h2
ip -4 route del 192.0.2.0/28 vrf v$h2
simple_if_fini $h2 192.0.2.130/28
}
router_create()
{
ip link add name br1 type bridge vlan_filtering 1
ip link set dev br1 up
ip link set dev $swp1 master br1
ip link set dev $swp1 up
bridge vlan add dev br1 vid 555 self pvid untagged
bridge vlan add dev $swp1 vid 555
__addr_add_del br1 add 192.0.2.2/28 2001:db8:1::2/64
ip link set dev $swp2 up
__addr_add_del $swp2 add 192.0.2.129/28 2001:db8:2::1/64
}
router_destroy()
{
__addr_add_del $swp2 del 192.0.2.129/28 2001:db8:2::1/64
ip link set dev $swp2 down
__addr_add_del br1 del 192.0.2.2/28 2001:db8:1::2/64
ip link set dev $swp1 down
ip link set dev $swp1 nomaster
ip link del dev br1
}
setup_prepare()
{
h1=${NETIFS[p1]}
swp1=${NETIFS[p2]}
swp2=${NETIFS[p3]}
h2=${NETIFS[p4]}
vrf_prepare
h1_create
h2_create
router_create
forwarding_enable
}
cleanup()
{
pre_cleanup
forwarding_restore
router_destroy
h2_destroy
h1_destroy
vrf_cleanup
}
vlan()
{
RET=0
bridge vlan add dev br1 vid 333 self
check_err $? "Can't add a non-PVID VLAN"
bridge vlan del dev br1 vid 333 self
check_err $? "Can't remove a non-PVID VLAN"
log_test "vlan"
}
ping_ipv4()
{
ping_test $h1 192.0.2.130
}
ping_ipv6()
{
ping6_test $h1 2001:db8:2::2
}
trap cleanup EXIT
setup_prepare
setup_wait
tests_run
exit $EXIT_STATUS
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册