提交 5753c082 编写于 作者: K Kumar Gala

powerpc/85xx: Kconfig cleanup

Introduce new FSL_SOC_BOOKE Kconfig to handle both 85xx and QorIQ
based chips.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
上级 2e9d546e
menuconfig MPC85xx
bool "Machine Type"
depends on PPC_85xx
menuconfig FSL_SOC_BOOKE
bool "Freescale Book-E Machine Type"
depends on PPC_85xx || PPC_BOOK3E
select FSL_SOC
select PPC_UDBG_16550
select MPIC
select PPC_PCI_CHOICE
......@@ -8,7 +9,7 @@ menuconfig MPC85xx
select SERIAL_8250_SHARE_IRQ if SERIAL_8250
default y
if MPC85xx
if FSL_SOC_BOOKE
config MPC8540_ADS
bool "Freescale MPC8540 ADS"
......@@ -144,7 +145,7 @@ config SBC8560
help
This option enables support for the Wind River SBC8560 board
endif # MPC85xx
endif # FSL_SOC_BOOKE
config TQM85xx
bool
......@@ -260,7 +260,7 @@ config QE_GPIO
config CPM2
bool "Enable support for the CPM2 (Communications Processor Module)"
depends on MPC85xx || 8260
depends on (FSL_SOC_BOOKE && PPC32) || 8260
select CPM
select PPC_LIB_RHEAP
select PPC_PCI_CHOICE
......@@ -305,7 +305,7 @@ source "arch/powerpc/sysdev/bestcomm/Kconfig"
config MPC8xxx_GPIO
bool "MPC8xxx GPIO support"
depends on PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || PPC_85xx || PPC_86xx
depends on PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || FSL_SOC_BOOKE || PPC_86xx
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
......
......@@ -28,8 +28,6 @@ config PPC_BOOK3S_32
config PPC_85xx
bool "Freescale 85xx"
select E500
select FSL_SOC
select MPC85xx
config PPC_8xx
bool "Freescale 8xx"
......@@ -138,6 +136,14 @@ config PPC_FPU
bool
default y if PPC64
config FSL_EMB_PERFMON
bool "Freescale Embedded Perfmon"
depends on E500 || PPC_83xx
help
This is the Performance Monitor support found on the e500 core
and some e300 cores (c3 and c4). Select this only if your
core supports the Embedded Performance Monitor APU
config 4xx
bool
depends on 40x || 44x
......@@ -153,13 +159,6 @@ config FSL_BOOKE
depends on E200 || E500
default y
config FSL_EMB_PERFMON
bool "Freescale Embedded Perfmon"
depends on E500 || PPC_83xx
help
This is the Performance Monitor support found on the e500 core
and some e300 cores (c3 and c4). Select this only if your
core supports the Embedded Performance Monitor APU
config PTE_64BIT
bool
......
......@@ -12,7 +12,7 @@ obj-$(CONFIG_PPC_MPC52xx) += 52xx/
obj-$(CONFIG_PPC_8xx) += 8xx/
obj-$(CONFIG_PPC_82xx) += 82xx/
obj-$(CONFIG_PPC_83xx) += 83xx/
obj-$(CONFIG_PPC_85xx) += 85xx/
obj-$(CONFIG_FSL_SOC_BOOKE) += 85xx/
obj-$(CONFIG_PPC_86xx) += 86xx/
obj-$(CONFIG_PPC_PSERIES) += pseries/
obj-$(CONFIG_PPC_ISERIES) += iseries/
......
......@@ -56,7 +56,7 @@ static int __init fsl_pcie_check_link(struct pci_controller *hose)
return 0;
}
#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
static int __init setup_one_atmu(struct ccsr_pci __iomem *pci,
unsigned int index, const struct resource *res,
resource_size_t offset)
......@@ -394,7 +394,7 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020E, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020, quirk_fsl_pcie_header);
#endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */
#endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */
#if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314E, quirk_fsl_pcie_header);
......
......@@ -372,7 +372,7 @@ static int __init fsl_usb_of_init(void)
arch_initcall(fsl_usb_of_init);
#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
static __be32 __iomem *rstcr;
static int __init setup_rstcr(void)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册