Skip to content

C
clone-Linux

gsplhtlxg / clone-Linux

通知 2
Star 0
Fork 1
C
clone-Linux

体验新版 GitCode，发现更多精彩内容 >>

提交 4d460fd3 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge tag 'regulator-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator 

Pull regulator updates from Mark Brown:
 "Lots and lots of fixes from Axel and some others here, plus some
  framework enhancements which continue the theme of factoring code out
  of the drivers and into the core.

   - Initial framework support for GPIO controlled enable signals,
     saving a bunch of code in drivers.
   - Move fixed regulator enable time and voltage mapping table
     specifications to data.
   - Used some of the recent framework enhancements to make voltage
     change notifications more useful, passing the voltage in as an
     argument to the notification.
   - Fixed the pattern used for finding individual regulators on a
     device to not rely on the node name, supporting the use of multiple
     PMICs of the same type in the system.
   - New drivers for Maxim MAX77686, TI LP872x and LP8788, Samsung
     S2MPS11, and Wolfson Arizona microphone supplies and LDOs."

* tag 'regulator-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (176 commits)
  regulator: add new lp8788 regulator driver
  regulator: mc13xxx: Remove extern function declaration for mc13xxx_sw_regulator
  regulator: tps65910: set input_supply on desc unconditionally
  regulator: palmas: Fix calcuating selector in palmas_map_voltage_smps
  regulator: lp872x: Simplify implementation of lp872x_find_regulator_init_data()
  regulator: twl: Fix list_voltate for twl6030ldo_ops
  regulator: twl: Convert twl6030ldo_ops to [get|set]_voltage_sel
  regulator: twl: Fix the formula to calculate vsel and voltage for twl6030ldo
  regulator: s5m8767: Properly handle gpio_request failure
  regulator: max8997: Properly handle gpio_request failure
  regulator: tps62360: use devm_* for gpio request
  regulator: tps6586x: add support for input supply
  regulator: tps65217: Add device tree support
  regulator: aat2870: Remove unused min_uV and max_uV from struct aat2870_regulator
  regulator: aat2870: Convert to regulator_list_voltage_table
  regulator: da9052: initialize of_node param for regulator register
  regulator: Add REGULATOR_STATUS_UNDEFINED.
  regulator: Fix a typo in regulator_mode_to_status() core function.
  regulator: s2mps11: Use sec_reg_write rather than sec_reg_update when mask is 0xff
  regulator: s2mps11: Fix wrong setting for config.dev
  ...
上级 7cd58b0a 3384fb98
展开全部 隐藏空白更改
内联 并排
Showing with 5524 addition and 2650 deletion
Documentation/devicetree/bindings/mfd/tps65910.txt
浏览文件 @ 4d460fd3
......@@ -17,18 +17,46 @@ Required properties:
device need to be present. The definition for each of these nodes is defined
using the standard binding for regulators found at
Documentation/devicetree/bindings/regulator/regulator.txt.
The regulator is matched with the regulator-compatible.
The valid names for regulators are:
The valid regulator-compatible values are:
tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1,
vaux2, vaux33, vmmc
tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5,
ldo6, ldo7, ldo8
- xxx-supply: Input voltage supply regulator.
These entries are require if regulators are enabled for a device. Missing of these
properties can cause the regulator registration fails.
If some of input supply is powered through battery or always-on supply then
also it is require to have these parameters with proper node handle of always
on power supply.
tps65910:
vcc1-supply: VDD1 input.
vcc2-supply: VDD2 input.
vcc3-supply: VAUX33 and VMMC input.
vcc4-supply: VAUX1 and VAUX2 input.
vcc5-supply: VPLL and VDAC input.
vcc6-supply: VDIG1 and VDIG2 input.
vcc7-supply: VRTC input.
vccio-supply: VIO input.
tps65911:
vcc1-supply: VDD1 input.
vcc2-supply: VDD2 input.
vcc3-supply: LDO6, LDO7 and LDO8 input.
vcc4-supply: LDO5 input.
vcc5-supply: LDO3 and LDO4 input.
vcc6-supply: LDO1 and LDO2 input.
vcc7-supply: VRTC input.
vccio-supply: VIO input.
Optional properties:
- ti,vmbch-threshold: (tps65911) main battery charged threshold
comparator. (see VMBCH_VSEL in TPS65910 datasheet)
- ti,vmbch2-threshold: (tps65911) main battery discharged threshold
comparator. (see VMBCH_VSEL in TPS65910 datasheet)
- ti,en-ck32k-xtal: enable external 32-kHz crystal oscillator (see CK32K_CTRL
in TPS6591X datasheet)
- ti,en-gpio-sleep: enable sleep control for gpios
There should be 9 entries here, one for each gpio.
......@@ -56,74 +84,110 @@ Example:
ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
vcc1-supply = <&reg_parent>;
vcc2-supply = <&some_reg>;
vcc3-supply = <...>;
vcc4-supply = <...>;
vcc5-supply = <...>;
vcc6-supply = <...>;
vcc7-supply = <...>;
vccio-supply = <...>;
regulators {
vdd1_reg: vdd1 {
#address-cells = <1>;
#size-cells = <0>;
vdd1_reg: regulator@0 {
regulator-compatible = "vdd1";
reg = <0>;
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
ti,regulator-ext-sleep-control = <0>;
};
vdd2_reg: vdd2 {
vdd2_reg: regulator@1 {
regulator-compatible = "vdd2";
reg = <1>;
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
ti,regulator-ext-sleep-control = <4>;
};
vddctrl_reg: vddctrl {
vddctrl_reg: regulator@2 {
regulator-compatible = "vddctrl";
reg = <2>;
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
ti,regulator-ext-sleep-control = <0>;
};
vio_reg: vio {
vio_reg: regulator@3 {
regulator-compatible = "vio";
reg = <3>;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
ti,regulator-ext-sleep-control = <1>;
};
ldo1_reg: ldo1 {
ldo1_reg: regulator@4 {
regulator-compatible = "ldo1";
reg = <4>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
ti,regulator-ext-sleep-control = <0>;
};
ldo2_reg: ldo2 {
ldo2_reg: regulator@5 {
regulator-compatible = "ldo2";
reg = <5>;
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
ti,regulator-ext-sleep-control = <0>;
};
ldo3_reg: ldo3 {
ldo3_reg: regulator@6 {
regulator-compatible = "ldo3";
reg = <6>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
ti,regulator-ext-sleep-control = <0>;
};
ldo4_reg: ldo4 {
ldo4_reg: regulator@7 {
regulator-compatible = "ldo4";
reg = <7>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
ti,regulator-ext-sleep-control = <0>;
};
ldo5_reg: ldo5 {
ldo5_reg: regulator@8 {
regulator-compatible = "ldo5";
reg = <8>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
ti,regulator-ext-sleep-control = <0>;
};
ldo6_reg: ldo6 {
ldo6_reg: regulator@9 {
regulator-compatible = "ldo6";
reg = <9>;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
ti,regulator-ext-sleep-control = <0>;
};
ldo7_reg: ldo7 {
ldo7_reg: regulator@10 {
regulator-compatible = "ldo7";
reg = <10>;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
ti,regulator-ext-sleep-control = <1>;
};
ldo8_reg: ldo8 {
ldo8_reg: regulator@11 {
regulator-compatible = "ldo8";
reg = <11>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
......
Documentation/devicetree/bindings/regulator/fixed-regulator.txt
浏览文件 @ 4d460fd3
......@@ -10,6 +10,7 @@ Optional properties:
If this property is missing, the default assumed is Active low.
- gpio-open-drain: GPIO is open drain type.
If this property is missing then default assumption is false.
-vin-supply: Input supply name.
Any property defined as part of the core regulator
binding, defined in regulator.txt, can also be used.
......@@ -29,4 +30,5 @@ Example:
enable-active-high;
regulator-boot-on;
gpio-open-drain;
vin-supply = <&parent_reg>;
};
Documentation/devicetree/bindings/regulator/regulator.txt
浏览文件 @ 4d460fd3
......@@ -10,6 +10,11 @@ Optional properties:
- regulator-always-on: boolean, regulator should never be disabled
- regulator-boot-on: bootloader/firmware enabled regulator
- <name>-supply: phandle to the parent supply/regulator node
- regulator-ramp-delay: ramp delay for regulator(in uV/uS)
- regulator-compatible: If a regulator chip contains multiple
regulators, and if the chip's binding contains a child node that
describes each regulator, then this property indicates which regulator
this child node is intended to configure.
Example:
......
Documentation/devicetree/bindings/regulator/tps65217.txt 0 → 100644
浏览文件 @ 4d460fd3
TPS65217 family of regulators
Required properties:
- compatible: "ti,tps65217"
- reg: I2C slave address
- regulators: list of regulators provided by this controller, must be named
after their hardware counterparts: dcdc[1-3] and ldo[1-4]
- regulators: This is the list of child nodes that specify the regulator
initialization data for defined regulators. Not all regulators for the given
device need to be present. The definition for each of these nodes is defined
using the standard binding for regulators found at
Documentation/devicetree/bindings/regulator/regulator.txt.
The valid names for regulators are:
tps65217: dcdc1, dcdc2, dcdc3, ldo1, ldo2, ldo3 and ldo4
Each regulator is defined using the standard binding for regulators.
Example:
tps: tps@24 {
compatible = "ti,tps65217";
regulators {
#address-cells = <1>;
#size-cells = <0>;
dcdc1_reg: regulator@0 {
reg = <0>;
regulator-compatible = "dcdc1";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
dcdc2_reg: regulator@1 {
reg = <1>;
regulator-compatible = "dcdc2";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
dcdc3_reg: regulator@2 {
reg = <2>;
regulator-compatible = "dcdc3";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
ldo1_reg: regulator@3 {
reg = <3>;
regulator-compatible = "ldo1";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: regulator@4 {
reg = <4>;
regulator-compatible = "ldo2";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo3_reg: regulator@5 {
reg = <5>;
regulator-compatible = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo4_reg: regulator@6 {
reg = <6>;
regulator-compatible = "ldo4";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
};
};
Documentation/devicetree/bindings/regulator/tps6586x.txt
浏览文件 @ 4d460fd3
......@@ -6,8 +6,17 @@ Required properties:
- interrupts: the interrupt outputs of the controller
- #gpio-cells: number of cells to describe a GPIO
- gpio-controller: mark the device as a GPIO controller
- regulators: list of regulators provided by this controller, must be named
after their hardware counterparts: sm[0-2], ldo[0-9] and ldo_rtc
- regulators: list of regulators provided by this controller, must have
property "regulator-compatible" to match their hardware counterparts:
sm[0-2], ldo[0-9] and ldo_rtc
- sm0-supply: The input supply for the SM0.
- sm1-supply: The input supply for the SM1.
- sm2-supply: The input supply for the SM2.
- vinldo01-supply: The input supply for the LDO1 and LDO2
- vinldo23-supply: The input supply for the LDO2 and LDO3
- vinldo4-supply: The input supply for the LDO4
- vinldo678-supply: The input supply for the LDO6, LDO7 and LDO8
- vinldo9-supply: The input supply for the LDO9
Each regulator is defined using the standard binding for regulators.
......@@ -21,75 +30,113 @@ Example:
#gpio-cells = <2>;
gpio-controller;
sm0-supply = <&some_reg>;
sm1-supply = <&some_reg>;
sm2-supply = <&some_reg>;
vinldo01-supply = <...>;
vinldo23-supply = <...>;
vinldo4-supply = <...>;
vinldo678-supply = <...>;
vinldo9-supply = <...>;
regulators {
sm0_reg: sm0 {
#address-cells = <1>;
#size-cells = <0>;
sm0_reg: regulator@0 {
reg = <0>;
regulator-compatible = "sm0";
regulator-min-microvolt = < 725000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
sm1_reg: sm1 {
sm1_reg: regulator@1 {
reg = <1>;
regulator-compatible = "sm1";
regulator-min-microvolt = < 725000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
sm2_reg: sm2 {
sm2_reg: regulator@2 {
reg = <2>;
regulator-compatible = "sm2";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <4550000>;
regulator-boot-on;
regulator-always-on;
};
ldo0_reg: ldo0 {
ldo0_reg: regulator@3 {
reg = <3>;
regulator-compatible = "ldo0";
regulator-name = "PCIE CLK";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldo1_reg: ldo1 {
ldo1_reg: regulator@4 {
reg = <4>;
regulator-compatible = "ldo1";
regulator-min-microvolt = < 725000>;
regulator-max-microvolt = <1500000>;
};
ldo2_reg: ldo2 {
ldo2_reg: regulator@5 {
reg = <5>;
regulator-compatible = "ldo2";
regulator-min-microvolt = < 725000>;
regulator-max-microvolt = <1500000>;
};
ldo3_reg: ldo3 {
ldo3_reg: regulator@6 {
reg = <6>;
regulator-compatible = "ldo3";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
ldo4_reg: ldo4 {
ldo4_reg: regulator@7 {
reg = <7>;
regulator-compatible = "ldo4";
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <2475000>;
};
ldo5_reg: ldo5 {
ldo5_reg: regulator@8 {
reg = <8>;
regulator-compatible = "ldo5";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
ldo6_reg: ldo6 {
ldo6_reg: regulator@9 {
reg = <9>;
regulator-compatible = "ldo6";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
ldo7_reg: ldo7 {
ldo7_reg: regulator@10 {
reg = <10>;
regulator-compatible = "ldo7";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
ldo8_reg: ldo8 {
ldo8_reg: regulator@11 {
reg = <11>;
regulator-compatible = "ldo8";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
ldo9_reg: ldo9 {
ldo9_reg: regulator@12 {
reg = <12>;
regulator-compatible = "ldo9";
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3300000>;
};
......
Documentation/devicetree/bindings/regulator/twl-regulator.txt
浏览文件 @ 4d460fd3
......@@ -15,7 +15,6 @@ For twl6030 regulators/LDOs
- "ti,twl6030-vusb" for VUSB LDO
- "ti,twl6030-v1v8" for V1V8 LDO
- "ti,twl6030-v2v1" for V2V1 LDO
- "ti,twl6030-clk32kg" for CLK32KG RESOURCE
- "ti,twl6030-vdd1" for VDD1 SMPS
- "ti,twl6030-vdd2" for VDD2 SMPS
- "ti,twl6030-vdd3" for VDD3 SMPS
......
arch/arm/boot/dts/db8500.dtsi
浏览文件 @ 4d460fd3
......@@ -206,62 +206,74 @@ db8500-prcmu-regulators {
// DB8500_REGULATOR_VAPE
db8500_vape_reg: db8500_vape {
regulator-compatible = "db8500_vape";
regulator-name = "db8500-vape";
regulator-always-on;
};
// DB8500_REGULATOR_VARM
db8500_varm_reg: db8500_varm {
regulator-compatible = "db8500_varm";
regulator-name = "db8500-varm";
};
// DB8500_REGULATOR_VMODEM
db8500_vmodem_reg: db8500_vmodem {
regulator-compatible = "db8500_vmodem";
regulator-name = "db8500-vmodem";
};
// DB8500_REGULATOR_VPLL
db8500_vpll_reg: db8500_vpll {
regulator-compatible = "db8500_vpll";
regulator-name = "db8500-vpll";
};
// DB8500_REGULATOR_VSMPS1
db8500_vsmps1_reg: db8500_vsmps1 {
regulator-compatible = "db8500_vsmps1";
regulator-name = "db8500-vsmps1";
};
// DB8500_REGULATOR_VSMPS2
db8500_vsmps2_reg: db8500_vsmps2 {
regulator-compatible = "db8500_vsmps2";
regulator-name = "db8500-vsmps2";
};
// DB8500_REGULATOR_VSMPS3
db8500_vsmps3_reg: db8500_vsmps3 {
regulator-compatible = "db8500_vsmps3";
regulator-name = "db8500-vsmps3";
};
// DB8500_REGULATOR_VRF1
db8500_vrf1_reg: db8500_vrf1 {
regulator-compatible = "db8500_vrf1";
regulator-name = "db8500-vrf1";
};
// DB8500_REGULATOR_SWITCH_SVAMMDSP
db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
regulator-compatible = "db8500_sva_mmdsp";
regulator-name = "db8500-sva-mmdsp";
};
// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
regulator-compatible = "db8500_sva_mmdsp_ret";
regulator-name = "db8500-sva-mmdsp-ret";
};
// DB8500_REGULATOR_SWITCH_SVAPIPE
db8500_sva_pipe_reg: db8500_sva_pipe {
regulator-compatible = "db8500_sva_pipe";
regulator-name = "db8500_sva_pipe";
};
// DB8500_REGULATOR_SWITCH_SIAMMDSP
db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
regulator-compatible = "db8500_sia_mmdsp";
regulator-name = "db8500_sia_mmdsp";
};
......@@ -272,38 +284,45 @@ db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
// DB8500_REGULATOR_SWITCH_SIAPIPE
db8500_sia_pipe_reg: db8500_sia_pipe {
regulator-compatible = "db8500_sia_pipe";
regulator-name = "db8500-sia-pipe";
};
// DB8500_REGULATOR_SWITCH_SGA
db8500_sga_reg: db8500_sga {
regulator-compatible = "db8500_sga";
regulator-name = "db8500-sga";
vin-supply = <&db8500_vape_reg>;
};
// DB8500_REGULATOR_SWITCH_B2R2_MCDE
db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
regulator-compatible = "db8500_b2r2_mcde";
regulator-name = "db8500-b2r2-mcde";
vin-supply = <&db8500_vape_reg>;
};
// DB8500_REGULATOR_SWITCH_ESRAM12
db8500_esram12_reg: db8500_esram12 {
regulator-compatible = "db8500_esram12";
regulator-name = "db8500-esram12";
};
// DB8500_REGULATOR_SWITCH_ESRAM12RET
db8500_esram12_ret_reg: db8500_esram12_ret {
regulator-compatible = "db8500_esram12_ret";
regulator-name = "db8500-esram12-ret";
};
// DB8500_REGULATOR_SWITCH_ESRAM34
db8500_esram34_reg: db8500_esram34 {
regulator-compatible = "db8500_esram34";
regulator-name = "db8500-esram34";
};
// DB8500_REGULATOR_SWITCH_ESRAM34RET
db8500_esram34_ret_reg: db8500_esram34_ret {
regulator-compatible = "db8500_esram34_ret";
regulator-name = "db8500-esram34-ret";
};
};
......@@ -318,6 +337,7 @@ ab8500-regulators {
// supplies to the display/camera
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-compatible = "ab8500_ldo_aux1";
regulator-name = "V-DISPLAY";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2900000>;
......@@ -328,6 +348,7 @@ ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
// supplies to the on-board eMMC
ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
regulator-compatible = "ab8500_ldo_aux2";
regulator-name = "V-eMMC1";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <3300000>;
......@@ -335,6 +356,7 @@ ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
// supply for VAUX3; SDcard slots
ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
regulator-compatible = "ab8500_ldo_aux3";
regulator-name = "V-MMC-SD";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <3300000>;
......@@ -342,41 +364,49 @@ ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
// supply for v-intcore12; VINTCORE12 LDO
ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
regulator-compatible = "ab8500_ldo_initcore";
regulator-name = "V-INTCORE";
};
// supply for tvout; gpadc; TVOUT LDO
ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
regulator-compatible = "ab8500_ldo_tvout";
regulator-name = "V-TVOUT";
};
// supply for ab8500-usb; USB LDO
ab8500_ldo_usb_reg: ab8500_ldo_usb {
regulator-compatible = "ab8500_ldo_usb";
regulator-name = "dummy";
};
// supply for ab8500-vaudio; VAUDIO LDO
ab8500_ldo_audio_reg: ab8500_ldo_audio {
regulator-compatible = "ab8500_ldo_audio";
regulator-name = "V-AUD";
};
// supply for v-anamic1 VAMic1-LDO
ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
regulator-compatible = "ab8500_ldo_anamic1";
regulator-name = "V-AMIC1";
};
// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
regulator-compatible = "ab8500_ldo_amamic2";
regulator-name = "V-AMIC2";
};
// supply for v-dmic; VDMIC LDO
ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
regulator-compatible = "ab8500_ldo_dmic";
regulator-name = "V-DMIC";
};
// supply for U8500 CSI/DSI; VANA LDO
ab8500_ldo_ana_reg: ab8500_ldo_ana {
regulator-compatible = "ab8500_ldo_ana";
regulator-name = "V-CSI/DSI";
};
};
......
drivers/mfd/tps65217.c
浏览文件 @ 4d460fd3
......@@ -24,6 +24,7 @@
#include <linux/slab.h>
#include <linux/regmap.h>
#include <linux/err.h>
#include <linux/regulator/of_regulator.h>
#include <linux/mfd/core.h>
#include <linux/mfd/tps65217.h>
......@@ -132,6 +133,61 @@ int tps65217_clear_bits(struct tps65217 *tps, unsigned int reg,
}
EXPORT_SYMBOL_GPL(tps65217_clear_bits);
#ifdef CONFIG_OF
static struct of_regulator_match reg_matches[] = {
{ .name = "dcdc1", .driver_data = (void *)TPS65217_DCDC_1 },
{ .name = "dcdc2", .driver_data = (void *)TPS65217_DCDC_2 },
{ .name = "dcdc3", .driver_data = (void *)TPS65217_DCDC_3 },
{ .name = "ldo1", .driver_data = (void *)TPS65217_LDO_1 },
{ .name = "ldo2", .driver_data = (void *)TPS65217_LDO_2 },
{ .name = "ldo3", .driver_data = (void *)TPS65217_LDO_3 },
{ .name = "ldo4", .driver_data = (void *)TPS65217_LDO_4 },
};
static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client)
{
struct device_node *node = client->dev.of_node;
struct tps65217_board *pdata;
struct device_node *regs;
int count = ARRAY_SIZE(reg_matches);
int ret, i;
regs = of_find_node_by_name(node, "regulators");
if (!regs)
return NULL;
ret = of_regulator_match(&client->dev, regs, reg_matches, count);
of_node_put(regs);
if ((ret < 0) || (ret > count))
return NULL;
count = ret;
pdata = devm_kzalloc(&client->dev, count * sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return NULL;
for (i = 0; i < count; i++) {
if (!reg_matches[i].init_data || !reg_matches[i].of_node)
continue;
pdata->tps65217_init_data[i] = reg_matches[i].init_data;
pdata->of_node[i] = reg_matches[i].of_node;
}
return pdata;
}
static struct of_device_id tps65217_of_match[] = {
{ .compatible = "ti,tps65217", },
{ },
};
#else
static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client)
{
return NULL;
}
#endif
static struct regmap_config tps65217_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
......@@ -141,10 +197,14 @@ static int __devinit tps65217_probe(struct i2c_client *client,
const struct i2c_device_id *ids)
{
struct tps65217 *tps;
struct regulator_init_data *reg_data;
struct tps65217_board *pdata = client->dev.platform_data;
int i, ret;
unsigned int version;
if (!pdata && client->dev.of_node)
pdata = tps65217_parse_dt(client);
tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
if (!tps)
return -ENOMEM;
......@@ -182,8 +242,9 @@ static int __devinit tps65217_probe(struct i2c_client *client,
}
pdev->dev.parent = tps->dev;
platform_device_add_data(pdev, &pdata->tps65217_init_data[i],
sizeof(pdata->tps65217_init_data[i]));
pdev->dev.of_node = pdata->of_node[i];
reg_data = pdata->tps65217_init_data[i];
platform_device_add_data(pdev, reg_data, sizeof(*reg_data));
tps->regulator_pdev[i] = pdev;
platform_device_add(pdev);
......@@ -212,6 +273,8 @@ MODULE_DEVICE_TABLE(i2c, tps65217_id_table);
static struct i2c_driver tps65217_driver = {
.driver = {
.name = "tps65217",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(tps65217_of_match),
},
.id_table = tps65217_id_table,
.probe = tps65217_probe,
......
drivers/regulator/Kconfig
浏览文件 @ 4d460fd3
......@@ -20,6 +20,7 @@ menuconfig REGULATOR
If unsure, say no.
if REGULATOR
config REGULATOR_DEBUG
......@@ -88,6 +89,13 @@ config REGULATOR_AAT2870
If you have a AnalogicTech AAT2870 say Y to enable the
regulator driver.
config REGULATOR_ARIZONA
tristate "Wolfson Arizona class devices"
depends on MFD_ARIZONA
help
Support for the regulators found on Wolfson Arizona class
devices.
config REGULATOR_DA903X
tristate "Dialog Semiconductor DA9030/DA9034 regulators"
depends on PMIC_DA903X
......@@ -195,6 +203,14 @@ config REGULATOR_MAX8998
via I2C bus. The provided regulator is suitable for S3C6410
and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
config REGULATOR_MAX77686
tristate "Maxim 77686 regulator"
depends on MFD_MAX77686
help
This driver controls a Maxim 77686 regulator
via I2C bus. The provided regulator is suitable for
Exynos-4 chips to control VARM and VINT voltages.
config REGULATOR_PCAP
tristate "Motorola PCAP2 regulator driver"
depends on EZX_PCAP
......@@ -216,6 +232,19 @@ config REGULATOR_LP3972
Say Y here to support the voltage regulators and convertors
on National Semiconductors LP3972 PMIC
config REGULATOR_LP872X
bool "TI/National Semiconductor LP8720/LP8725 voltage regulators"
depends on I2C=y
select REGMAP_I2C
help
This driver supports LP8720/LP8725 PMIC
config REGULATOR_LP8788
bool "TI LP8788 Power Regulators"
depends on MFD_LP8788
help
This driver supports LP8788 voltage regulator chip.
config REGULATOR_PCF50633
tristate "NXP PCF50633 regulator driver"
depends on MFD_PCF50633
......@@ -233,6 +262,14 @@ config REGULATOR_RC5T583
through regulator interface. The device supports multiple DCDC/LDO
outputs which can be controlled by i2c communication.
config REGULATOR_S2MPS11
tristate "Samsung S2MPS11 voltage regulator"
depends on MFD_SEC_CORE
help
This driver supports a Samsung S2MPS11 voltage output regulator
via I2C bus. S2MPS11 is comprised of high efficient Buck converters
including Dual-Phase Buck converter, Buck-Boost converter, various LDOs.
config REGULATOR_S5M8767
tristate "Samsung S5M8767A voltage regulator"
depends on MFD_S5M_CORE
......
drivers/regulator/Makefile
浏览文件 @ 4d460fd3
......@@ -15,6 +15,7 @@ obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o
obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o
obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o
......@@ -23,6 +24,9 @@ obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o
obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o
obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o
obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o
obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
......@@ -30,6 +34,7 @@ obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o
obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o
obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o
obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
......@@ -37,6 +42,7 @@ obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o
obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o
obj-$(CONFIG_REGULATOR_TPS62360) += tps62360-regulator.o
......
drivers/regulator/aat2870-regulator.c
浏览文件 @ 4d460fd3
......@@ -33,11 +33,6 @@ struct aat2870_regulator {
struct aat2870_data *aat2870;
struct regulator_desc desc;
const int *voltages; /* uV */
int min_uV;
int max_uV;
u8 enable_addr;
u8 enable_shift;
u8 enable_mask;
......@@ -47,14 +42,6 @@ struct aat2870_regulator {
u8 voltage_mask;
};
static int aat2870_ldo_list_voltage(struct regulator_dev *rdev,
unsigned selector)
{
struct aat2870_regulator *ri = rdev_get_drvdata(rdev);
return ri->voltages[selector];
}
static int aat2870_ldo_set_voltage_sel(struct regulator_dev *rdev,
unsigned selector)
{
......@@ -111,7 +98,7 @@ static int aat2870_ldo_is_enabled(struct regulator_dev *rdev)
}
static struct regulator_ops aat2870_ldo_ops = {
.list_voltage = aat2870_ldo_list_voltage,
.list_voltage = regulator_list_voltage_table,
.set_voltage_sel = aat2870_ldo_set_voltage_sel,
.get_voltage_sel = aat2870_ldo_get_voltage_sel,
.enable = aat2870_ldo_enable,
......@@ -119,7 +106,7 @@ static struct regulator_ops aat2870_ldo_ops = {
.is_enabled = aat2870_ldo_is_enabled,
};
static const int aat2870_ldo_voltages[] = {
static const unsigned int aat2870_ldo_voltages[] = {
1200000, 1300000, 1500000, 1600000,
1800000, 2000000, 2200000, 2500000,
2600000, 2700000, 2800000, 2900000,
......@@ -132,13 +119,11 @@ static const int aat2870_ldo_voltages[] = {
.name = #ids, \
.id = AAT2870_ID_##ids, \
.n_voltages = ARRAY_SIZE(aat2870_ldo_voltages), \
.volt_table = aat2870_ldo_voltages, \
.ops = &aat2870_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
}, \
.voltages = aat2870_ldo_voltages, \
.min_uV = 1200000, \
.max_uV = 3300000, \
}
static struct aat2870_regulator aat2870_regulators[] = {
......
drivers/regulator/ab3100.c
浏览文件 @ 4d460fd3
......@@ -43,20 +43,12 @@
* @dev: handle to the device
* @plfdata: AB3100 platform data passed in at probe time
* @regreg: regulator register number in the AB3100
* @fixed_voltage: a fixed voltage for this regulator, if this
* 0 the voltages array is used instead.
* @typ_voltages: an array of available typical voltages for
* this regulator
* @voltages_len: length of the array of available voltages
*/
struct ab3100_regulator {
struct regulator_dev *rdev;
struct device *dev;
struct ab3100_platform_data *plfdata;
u8 regreg;
int fixed_voltage;
int const *typ_voltages;
u8 voltages_len;
};
/* The order in which registers are initialized */
......@@ -80,7 +72,7 @@ static const u8 ab3100_reg_init_order[AB3100_NUM_REGULATORS+2] = {
#define LDO_C_VOLTAGE 2650000
#define LDO_D_VOLTAGE 2650000
static const int ldo_e_buck_typ_voltages[] = {
static const unsigned int ldo_e_buck_typ_voltages[] = {
1800000,
1400000,
1300000,
......@@ -90,7 +82,7 @@ static const int ldo_e_buck_typ_voltages[] = {
900000,
};
static const int ldo_f_typ_voltages[] = {
static const unsigned int ldo_f_typ_voltages[] = {
1800000,
1400000,
1300000,
......@@ -101,21 +93,21 @@ static const int ldo_f_typ_voltages[] = {
2650000,
};
static const int ldo_g_typ_voltages[] = {
static const unsigned int ldo_g_typ_voltages[] = {
2850000,
2750000,
1800000,
1500000,
};
static const int ldo_h_typ_voltages[] = {
static const unsigned int ldo_h_typ_voltages[] = {
2750000,
1800000,
1500000,
1200000,
};
static const int ldo_k_typ_voltages[] = {
static const unsigned int ldo_k_typ_voltages[] = {
2750000,
1800000,
};
......@@ -126,40 +118,27 @@ static struct ab3100_regulator
ab3100_regulators[AB3100_NUM_REGULATORS] = {
{
.regreg = AB3100_LDO_A,
.fixed_voltage = LDO_A_VOLTAGE,
},
{
.regreg = AB3100_LDO_C,
.fixed_voltage = LDO_C_VOLTAGE,
},
{
.regreg = AB3100_LDO_D,
.fixed_voltage = LDO_D_VOLTAGE,
},
{
.regreg = AB3100_LDO_E,
.typ_voltages = ldo_e_buck_typ_voltages,
.voltages_len = ARRAY_SIZE(ldo_e_buck_typ_voltages),
},
{
.regreg = AB3100_LDO_F,
.typ_voltages = ldo_f_typ_voltages,
.voltages_len = ARRAY_SIZE(ldo_f_typ_voltages),
},
{
.regreg = AB3100_LDO_G,
.typ_voltages = ldo_g_typ_voltages,
.voltages_len = ARRAY_SIZE(ldo_g_typ_voltages),
},
{
.regreg = AB3100_LDO_H,
.typ_voltages = ldo_h_typ_voltages,
.voltages_len = ARRAY_SIZE(ldo_h_typ_voltages),
},
{
.regreg = AB3100_LDO_K,
.typ_voltages = ldo_k_typ_voltages,
.voltages_len = ARRAY_SIZE(ldo_k_typ_voltages),
},
{
.regreg = AB3100_LDO_EXT,
......@@ -167,8 +146,6 @@ ab3100_regulators[AB3100_NUM_REGULATORS] = {
},
{
.regreg = AB3100_BUCK,
.typ_voltages = ldo_e_buck_typ_voltages,
.voltages_len = ARRAY_SIZE(ldo_e_buck_typ_voltages),
},
};
......@@ -178,7 +155,7 @@ ab3100_regulators[AB3100_NUM_REGULATORS] = {
*/
static int ab3100_enable_regulator(struct regulator_dev *reg)
{
struct ab3100_regulator *abreg = reg->reg_data;
struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
int err;
u8 regval;
......@@ -209,7 +186,7 @@ static int ab3100_enable_regulator(struct regulator_dev *reg)
static int ab3100_disable_regulator(struct regulator_dev *reg)
{
struct ab3100_regulator *abreg = reg->reg_data;
struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
int err;
u8 regval;
......@@ -242,7 +219,7 @@ static int ab3100_disable_regulator(struct regulator_dev *reg)
static int ab3100_is_enabled_regulator(struct regulator_dev *reg)
{
struct ab3100_regulator *abreg = reg->reg_data;
struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
u8 regval;
int err;
......@@ -257,26 +234,12 @@ static int ab3100_is_enabled_regulator(struct regulator_dev *reg)
return regval & AB3100_REG_ON_MASK;
}
static int ab3100_list_voltage_regulator(struct regulator_dev *reg,
unsigned selector)
{
struct ab3100_regulator *abreg = reg->reg_data;
if (selector >= abreg->voltages_len)
return -EINVAL;
return abreg->typ_voltages[selector];
}
static int ab3100_get_voltage_regulator(struct regulator_dev *reg)
{
struct ab3100_regulator *abreg = reg->reg_data;
struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
u8 regval;
int err;
/* Return the voltage for fixed regulators immediately */
if (abreg->fixed_voltage)
return abreg->fixed_voltage;
/*
* For variable types, read out setting and index into
* supplied voltage list.
......@@ -294,20 +257,20 @@ static int ab3100_get_voltage_regulator(struct regulator_dev *reg)
regval &= 0xE0;
regval >>= 5;
if (regval >= abreg->voltages_len) {
if (regval >= reg->desc->n_voltages) {
dev_err(&reg->dev,
"regulator register %02x contains an illegal voltage setting\n",
abreg->regreg);
return -EINVAL;
}
return abreg->typ_voltages[regval];
return reg->desc->volt_table[regval];
}
static int ab3100_set_voltage_regulator_sel(struct regulator_dev *reg,
unsigned selector)
{
struct ab3100_regulator *abreg = reg->reg_data;
struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
u8 regval;
int err;
......@@ -336,7 +299,7 @@ static int ab3100_set_voltage_regulator_sel(struct regulator_dev *reg,
static int ab3100_set_suspend_voltage_regulator(struct regulator_dev *reg,
int uV)
{
struct ab3100_regulator *abreg = reg->reg_data;
struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
u8 regval;
int err;
int bestindex;
......@@ -379,42 +342,22 @@ static int ab3100_set_suspend_voltage_regulator(struct regulator_dev *reg,
*/
static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg)
{
struct ab3100_regulator *abreg = reg->reg_data;
struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
return abreg->plfdata->external_voltage;
}
static int ab3100_enable_time_regulator(struct regulator_dev *reg)
static int ab3100_get_fixed_voltage_regulator(struct regulator_dev *reg)
{
struct ab3100_regulator *abreg = reg->reg_data;
/* Per-regulator power on delay from spec */
switch (abreg->regreg) {
case AB3100_LDO_A: /* Fallthrough */
case AB3100_LDO_C: /* Fallthrough */
case AB3100_LDO_D: /* Fallthrough */
case AB3100_LDO_E: /* Fallthrough */
case AB3100_LDO_H: /* Fallthrough */
case AB3100_LDO_K:
return 200;
case AB3100_LDO_F:
return 600;
case AB3100_LDO_G:
return 400;
case AB3100_BUCK:
return 1000;
default:
break;
}
return 0;
return reg->desc->min_uV;
}
static struct regulator_ops regulator_ops_fixed = {
.list_voltage = regulator_list_voltage_linear,
.enable = ab3100_enable_regulator,
.disable = ab3100_disable_regulator,
.is_enabled = ab3100_is_enabled_regulator,
.get_voltage = ab3100_get_voltage_regulator,
.enable_time = ab3100_enable_time_regulator,
.get_voltage = ab3100_get_fixed_voltage_regulator,
};
static struct regulator_ops regulator_ops_variable = {
......@@ -423,8 +366,7 @@ static struct regulator_ops regulator_ops_variable = {
.is_enabled = ab3100_is_enabled_regulator,
.get_voltage = ab3100_get_voltage_regulator,
.set_voltage_sel = ab3100_set_voltage_regulator_sel,
.list_voltage = ab3100_list_voltage_regulator,
.enable_time = ab3100_enable_time_regulator,
.list_voltage = regulator_list_voltage_table,
};
static struct regulator_ops regulator_ops_variable_sleepable = {
......@@ -434,8 +376,7 @@ static struct regulator_ops regulator_ops_variable_sleepable = {
.get_voltage = ab3100_get_voltage_regulator,
.set_voltage_sel = ab3100_set_voltage_regulator_sel,
.set_suspend_voltage = ab3100_set_suspend_voltage_regulator,
.list_voltage = ab3100_list_voltage_regulator,
.enable_time = ab3100_enable_time_regulator,
.list_voltage = regulator_list_voltage_table,
};
/*
......@@ -457,62 +398,81 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
.name = "LDO_A",
.id = AB3100_LDO_A,
.ops = &regulator_ops_fixed,
.n_voltages = 1,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.min_uV = LDO_A_VOLTAGE,
.enable_time = 200,
},
{
.name = "LDO_C",
.id = AB3100_LDO_C,
.ops = &regulator_ops_fixed,
.n_voltages = 1,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.min_uV = LDO_C_VOLTAGE,
.enable_time = 200,
},
{
.name = "LDO_D",
.id = AB3100_LDO_D,
.ops = &regulator_ops_fixed,
.n_voltages = 1,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.min_uV = LDO_D_VOLTAGE,
.enable_time = 200,
},
{
.name = "LDO_E",
.id = AB3100_LDO_E,
.ops = &regulator_ops_variable_sleepable,
.n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages),
.volt_table = ldo_e_buck_typ_voltages,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_time = 200,
},
{
.name = "LDO_F",
.id = AB3100_LDO_F,
.ops = &regulator_ops_variable,
.n_voltages = ARRAY_SIZE(ldo_f_typ_voltages),
.volt_table = ldo_f_typ_voltages,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_time = 600,
},
{
.name = "LDO_G",
.id = AB3100_LDO_G,
.ops = &regulator_ops_variable,
.n_voltages = ARRAY_SIZE(ldo_g_typ_voltages),
.volt_table = ldo_g_typ_voltages,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_time = 400,
},
{
.name = "LDO_H",
.id = AB3100_LDO_H,
.ops = &regulator_ops_variable,
.n_voltages = ARRAY_SIZE(ldo_h_typ_voltages),
.volt_table = ldo_h_typ_voltages,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_time = 200,
},
{
.name = "LDO_K",
.id = AB3100_LDO_K,
.ops = &regulator_ops_variable,
.n_voltages = ARRAY_SIZE(ldo_k_typ_voltages),
.volt_table = ldo_k_typ_voltages,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_time = 200,
},
{
.name = "LDO_EXT",
......@@ -528,6 +488,7 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
.n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages),
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_time = 1000,
},
};
......
drivers/regulator/ab8500.c
浏览文件 @ 4d460fd3
......@@ -30,9 +30,6 @@
* @dev: device pointer
* @desc: regulator description
* @regulator_dev: regulator device
* @max_uV: maximum voltage (for variable voltage supplies)
* @min_uV: minimum voltage (for variable voltage supplies)
* @fixed_uV: typical voltage (for fixed voltage supplies)
* @update_bank: bank to control on/off
* @update_reg: register to control on/off
* @update_mask: mask to enable/disable regulator
......@@ -40,17 +37,12 @@
* @voltage_bank: bank to control regulator voltage
* @voltage_reg: register to control regulator voltage
* @voltage_mask: mask to control regulator voltage
* @voltages: supported voltage table
* @voltages_len: number of supported voltages for the regulator
* @delay: startup/set voltage delay in us
*/
struct ab8500_regulator_info {
struct device *dev;
struct regulator_desc desc;
struct regulator_dev *regulator;
int max_uV;
int min_uV;
int fixed_uV;
u8 update_bank;
u8 update_reg;
u8 update_mask;
......@@ -58,13 +50,11 @@ struct ab8500_regulator_info {
u8 voltage_bank;
u8 voltage_reg;
u8 voltage_mask;
int const *voltages;
int voltages_len;
unsigned int delay;
};
/* voltage tables for the vauxn/vintcore supplies */
static const int ldo_vauxn_voltages[] = {
static const unsigned int ldo_vauxn_voltages[] = {
1100000,
1200000,
1300000,
......@@ -83,7 +73,7 @@ static const int ldo_vauxn_voltages[] = {
3300000,
};
static const int ldo_vaux3_voltages[] = {
static const unsigned int ldo_vaux3_voltages[] = {
1200000,
1500000,
1800000,
......@@ -94,7 +84,7 @@ static const int ldo_vaux3_voltages[] = {
2910000,
};
static const int ldo_vintcore_voltages[] = {
static const unsigned int ldo_vintcore_voltages[] = {
1200000,
1225000,
1250000,
......@@ -185,25 +175,6 @@ static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
return false;
}
static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector)
{
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
if (info == NULL) {
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
return -EINVAL;
}
/* return the uV for the fixed regulators */
if (info->fixed_uV)
return info->fixed_uV;
if (selector >= info->voltages_len)
return -EINVAL;
return info->voltages[selector];
}
static int ab8500_regulator_get_voltage_sel(struct regulator_dev *rdev)
{
int ret, val;
......@@ -279,14 +250,7 @@ static int ab8500_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
unsigned int new_sel)
{
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
int ret;
/* If the regulator isn't on, it won't take time here */
ret = ab8500_regulator_is_enabled(rdev);
if (ret < 0)
return ret;
if (!ret)
return 0;
return info->delay;
}
......@@ -296,21 +260,14 @@ static struct regulator_ops ab8500_regulator_ops = {
.is_enabled = ab8500_regulator_is_enabled,
.get_voltage_sel = ab8500_regulator_get_voltage_sel,
.set_voltage_sel = ab8500_regulator_set_voltage_sel,
.list_voltage = ab8500_list_voltage,
.list_voltage = regulator_list_voltage_table,
.enable_time = ab8500_regulator_enable_time,
.set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
};
static int ab8500_fixed_get_voltage(struct regulator_dev *rdev)
{
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
if (info == NULL) {
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
return -EINVAL;
}
return info->fixed_uV;
return rdev->desc->min_uV;
}
static struct regulator_ops ab8500_regulator_fixed_ops = {
......@@ -318,9 +275,8 @@ static struct regulator_ops ab8500_regulator_fixed_ops = {
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
.get_voltage = ab8500_fixed_get_voltage,
.list_voltage = ab8500_list_voltage,
.list_voltage = regulator_list_voltage_linear,
.enable_time = ab8500_regulator_enable_time,
.set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
};
static struct ab8500_regulator_info
......@@ -329,7 +285,7 @@ static struct ab8500_regulator_info
* Variable Voltage Regulators
* name, min mV, max mV,
* update bank, reg, mask, enable val
* volt bank, reg, mask, table, table length
* volt bank, reg, mask
*/
[AB8500_LDO_AUX1] = {
.desc = {
......@@ -339,9 +295,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_AUX1,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
},
.min_uV = 1100000,
.max_uV = 3300000,
.update_bank = 0x04,
.update_reg = 0x09,
.update_mask = 0x03,
......@@ -349,8 +304,6 @@ static struct ab8500_regulator_info
.voltage_bank = 0x04,
.voltage_reg = 0x1f,
.voltage_mask = 0x0f,
.voltages = ldo_vauxn_voltages,
.voltages_len = ARRAY_SIZE(ldo_vauxn_voltages),
},
[AB8500_LDO_AUX2] = {
.desc = {
......@@ -360,9 +313,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_AUX2,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
},
.min_uV = 1100000,
.max_uV = 3300000,
.update_bank = 0x04,
.update_reg = 0x09,
.update_mask = 0x0c,
......@@ -370,8 +322,6 @@ static struct ab8500_regulator_info
.voltage_bank = 0x04,
.voltage_reg = 0x20,
.voltage_mask = 0x0f,
.voltages = ldo_vauxn_voltages,
.voltages_len = ARRAY_SIZE(ldo_vauxn_voltages),
},
[AB8500_LDO_AUX3] = {
.desc = {
......@@ -381,9 +331,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_AUX3,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
.volt_table = ldo_vaux3_voltages,
},
.min_uV = 1100000,
.max_uV = 3300000,
.update_bank = 0x04,
.update_reg = 0x0a,
.update_mask = 0x03,
......@@ -391,8 +340,6 @@ static struct ab8500_regulator_info
.voltage_bank = 0x04,
.voltage_reg = 0x21,
.voltage_mask = 0x07,
.voltages = ldo_vaux3_voltages,
.voltages_len = ARRAY_SIZE(ldo_vaux3_voltages),
},
[AB8500_LDO_INTCORE] = {
.desc = {
......@@ -402,9 +349,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_INTCORE,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
.volt_table = ldo_vintcore_voltages,
},
.min_uV = 1100000,
.max_uV = 3300000,
.update_bank = 0x03,
.update_reg = 0x80,
.update_mask = 0x44,
......@@ -412,8 +358,6 @@ static struct ab8500_regulator_info
.voltage_bank = 0x03,
.voltage_reg = 0x80,
.voltage_mask = 0x38,
.voltages = ldo_vintcore_voltages,
.voltages_len = ARRAY_SIZE(ldo_vintcore_voltages),
},
/*
......@@ -429,9 +373,9 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_TVOUT,
.owner = THIS_MODULE,
.n_voltages = 1,
.min_uV = 2000000,
},
.delay = 10000,
.fixed_uV = 2000000,
.update_bank = 0x03,
.update_reg = 0x80,
.update_mask = 0x82,
......@@ -445,8 +389,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_USB,
.owner = THIS_MODULE,
.n_voltages = 1,
.min_uV = 3300000,
},
.fixed_uV = 3300000,
.update_bank = 0x03,
.update_reg = 0x82,
.update_mask = 0x03,
......@@ -460,8 +404,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_AUDIO,
.owner = THIS_MODULE,
.n_voltages = 1,
.min_uV = 2000000,
},
.fixed_uV = 2000000,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x02,
......@@ -475,8 +419,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_ANAMIC1,
.owner = THIS_MODULE,
.n_voltages = 1,
.min_uV = 2050000,
},
.fixed_uV = 2050000,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x08,
......@@ -490,8 +434,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_ANAMIC2,
.owner = THIS_MODULE,
.n_voltages = 1,
.min_uV = 2050000,
},
.fixed_uV = 2050000,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x10,
......@@ -505,8 +449,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_DMIC,
.owner = THIS_MODULE,
.n_voltages = 1,
.min_uV = 1800000,
},
.fixed_uV = 1800000,
.update_bank = 0x03,
.update_reg = 0x83,
.update_mask = 0x04,
......@@ -520,8 +464,8 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_ANA,
.owner = THIS_MODULE,
.n_voltages = 1,
.min_uV = 1200000,
},
.fixed_uV = 1200000,
.update_bank = 0x04,
.update_reg = 0x06,
.update_mask = 0x0c,
......@@ -769,9 +713,7 @@ static __devinit int ab8500_regulator_register(struct platform_device *pdev,
if (info->desc.id == AB8500_LDO_AUX3) {
info->desc.n_voltages =
ARRAY_SIZE(ldo_vauxn_voltages);
info->voltages = ldo_vauxn_voltages;
info->voltages_len =
ARRAY_SIZE(ldo_vauxn_voltages);
info->desc.volt_table = ldo_vauxn_voltages;
info->voltage_mask = 0xf;
}
}
......
drivers/regulator/ad5398.c
浏览文件 @ 4d460fd3
......@@ -89,9 +89,12 @@ static int ad5398_set_current_limit(struct regulator_dev *rdev, int min_uA, int
unsigned short data;
int ret;
if (min_uA > chip->max_uA || min_uA < chip->min_uA)
return -EINVAL;
if (max_uA > chip->max_uA || max_uA < chip->min_uA)
if (min_uA < chip->min_uA)
min_uA = chip->min_uA;
if (max_uA > chip->max_uA)
max_uA = chip->max_uA;
if (min_uA > chip->max_uA || max_uA < chip->min_uA)
return -EINVAL;
selector = DIV_ROUND_UP((min_uA - chip->min_uA) * chip->current_level,
......
drivers/regulator/anatop-regulator.c
浏览文件 @ 4d460fd3
......@@ -43,33 +43,15 @@ struct anatop_regulator {
struct regulator_init_data *initdata;
};
static int anatop_set_voltage(struct regulator_dev *reg, int min_uV,
int max_uV, unsigned *selector)
static int anatop_set_voltage_sel(struct regulator_dev *reg, unsigned selector)
{
struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
u32 val, sel, mask;
int uv;
uv = min_uV;
dev_dbg(&reg->dev, "%s: uv %d, min %d, max %d\n", __func__,
uv, anatop_reg->min_voltage,
anatop_reg->max_voltage);
if (uv < anatop_reg->min_voltage) {
if (max_uV > anatop_reg->min_voltage)
uv = anatop_reg->min_voltage;
else
return -EINVAL;
}
u32 val, mask;
if (!anatop_reg->control_reg)
return -ENOTSUPP;
sel = DIV_ROUND_UP(uv - anatop_reg->min_voltage, 25000);
if (sel * 25000 + anatop_reg->min_voltage > anatop_reg->max_voltage)
return -EINVAL;
val = anatop_reg->min_bit_val + sel;
*selector = sel;
val = anatop_reg->min_bit_val + selector;
dev_dbg(&reg->dev, "%s: calculated val %d\n", __func__, val);
mask = ((1 << anatop_reg->vol_bit_width) - 1) <<
anatop_reg->vol_bit_shift;
......@@ -94,21 +76,11 @@ static int anatop_get_voltage_sel(struct regulator_dev *reg)
return val - anatop_reg->min_bit_val;
}
static int anatop_list_voltage(struct regulator_dev *reg, unsigned selector)
{
struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
int uv;
uv = anatop_reg->min_voltage + selector * 25000;
dev_dbg(&reg->dev, "vddio = %d, selector = %u\n", uv, selector);
return uv;
}
static struct regulator_ops anatop_rops = {
.set_voltage = anatop_set_voltage,
.set_voltage_sel = anatop_set_voltage_sel,
.get_voltage_sel = anatop_get_voltage_sel,
.list_voltage = anatop_list_voltage,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
};
static int __devinit anatop_regulator_probe(struct platform_device *pdev)
......@@ -176,6 +148,8 @@ static int __devinit anatop_regulator_probe(struct platform_device *pdev)
rdesc->n_voltages = (sreg->max_voltage - sreg->min_voltage)
/ 25000 + 1;
rdesc->min_uV = sreg->min_voltage;
rdesc->uV_step = 25000;
config.dev = &pdev->dev;
config.init_data = initdata;
......
drivers/regulator/arizona-ldo1.c 0 → 100644
浏览文件 @ 4d460fd3
/*
* arizona-ldo1.c -- LDO1 supply for Arizona devices
*
* Copyright 2012 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/mfd/arizona/core.h>
#include <linux/mfd/arizona/pdata.h>
#include <linux/mfd/arizona/registers.h>
struct arizona_ldo1 {
struct regulator_dev *regulator;
struct arizona *arizona;
struct regulator_consumer_supply supply;
struct regulator_init_data init_data;
};
static struct regulator_ops arizona_ldo1_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
};
static const struct regulator_desc arizona_ldo1 = {
.name = "LDO1",
.supply_name = "LDOVDD",
.type = REGULATOR_VOLTAGE,
.ops = &arizona_ldo1_ops,
.vsel_reg = ARIZONA_LDO1_CONTROL_1,
.vsel_mask = ARIZONA_LDO1_VSEL_MASK,
.min_uV = 900000,
.uV_step = 50000,
.n_voltages = 7,
.owner = THIS_MODULE,
};
static const struct regulator_init_data arizona_ldo1_default = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
};
static __devinit int arizona_ldo1_probe(struct platform_device *pdev)
{
struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
struct regulator_config config = { };
struct arizona_ldo1 *ldo1;
int ret;
ldo1 = devm_kzalloc(&pdev->dev, sizeof(*ldo1), GFP_KERNEL);
if (ldo1 == NULL) {
dev_err(&pdev->dev, "Unable to allocate private data\n");
return -ENOMEM;
}
ldo1->arizona = arizona;
/*
* Since the chip usually supplies itself we provide some
* default init_data for it. This will be overridden with
* platform data if provided.
*/
ldo1->init_data = arizona_ldo1_default;
ldo1->init_data.consumer_supplies = &ldo1->supply;
ldo1->supply.supply = "DCVDD";
ldo1->supply.dev_name = dev_name(arizona->dev);
config.dev = arizona->dev;
config.driver_data = ldo1;
config.regmap = arizona->regmap;
config.ena_gpio = arizona->pdata.ldoena;
if (arizona->pdata.ldo1)
config.init_data = arizona->pdata.ldo1;
else
config.init_data = &ldo1->init_data;
ldo1->regulator = regulator_register(&arizona_ldo1, &config);
if (IS_ERR(ldo1->regulator)) {
ret = PTR_ERR(ldo1->regulator);
dev_err(arizona->dev, "Failed to register LDO1 supply: %d\n",
ret);
return ret;
}
platform_set_drvdata(pdev, ldo1);
return 0;
}
static __devexit int arizona_ldo1_remove(struct platform_device *pdev)
{
struct arizona_ldo1 *ldo1 = platform_get_drvdata(pdev);
regulator_unregister(ldo1->regulator);
return 0;
}
static struct platform_driver arizona_ldo1_driver = {
.probe = arizona_ldo1_probe,
.remove = __devexit_p(arizona_ldo1_remove),
.driver = {
.name = "arizona-ldo1",
.owner = THIS_MODULE,
},
};
module_platform_driver(arizona_ldo1_driver);
/* Module information */
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_DESCRIPTION("Arizona LDO1 driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:arizona-ldo1");
drivers/regulator/arizona-micsupp.c 0 → 100644
浏览文件 @ 4d460fd3
/*
* arizona-micsupp.c -- Microphone supply for Arizona devices
*
* Copyright 2012 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/mfd/arizona/core.h>
#include <linux/mfd/arizona/pdata.h>
#include <linux/mfd/arizona/registers.h>
#define ARIZONA_MICSUPP_MAX_SELECTOR 0x1f
struct arizona_micsupp {
struct regulator_dev *regulator;
struct arizona *arizona;
struct regulator_consumer_supply supply;
struct regulator_init_data init_data;
};
static int arizona_micsupp_list_voltage(struct regulator_dev *rdev,
unsigned int selector)
{
if (selector > ARIZONA_MICSUPP_MAX_SELECTOR)
return -EINVAL;
if (selector == ARIZONA_MICSUPP_MAX_SELECTOR)
return 3300000;
else
return (selector * 50000) + 1700000;
}
static int arizona_micsupp_map_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV)
{
unsigned int voltage;
int selector;
if (min_uV < 1700000)
min_uV = 1700000;
if (min_uV > 3200000)
selector = ARIZONA_MICSUPP_MAX_SELECTOR;
else
selector = DIV_ROUND_UP(min_uV - 1700000, 50000);
if (selector < 0)
return -EINVAL;
voltage = arizona_micsupp_list_voltage(rdev, selector);
if (voltage < min_uV || voltage > max_uV)
return -EINVAL;
return selector;
}
static struct regulator_ops arizona_micsupp_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.list_voltage = arizona_micsupp_list_voltage,
.map_voltage = arizona_micsupp_map_voltage,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
};
static const struct regulator_desc arizona_micsupp = {
.name = "MICVDD",
.supply_name = "CPVDD",
.type = REGULATOR_VOLTAGE,
.n_voltages = ARIZONA_MICSUPP_MAX_SELECTOR + 1,
.ops = &arizona_micsupp_ops,
.vsel_reg = ARIZONA_LDO2_CONTROL_1,
.vsel_mask = ARIZONA_LDO2_VSEL_MASK,
.enable_reg = ARIZONA_MIC_CHARGE_PUMP_1,
.enable_mask = ARIZONA_CPMIC_ENA,
.owner = THIS_MODULE,
};
static const struct regulator_init_data arizona_micsupp_default = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS |
REGULATOR_CHANGE_VOLTAGE,
.min_uV = 1700000,
.max_uV = 3300000,
},
.num_consumer_supplies = 1,
};
static __devinit int arizona_micsupp_probe(struct platform_device *pdev)
{
struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
struct regulator_config config = { };
struct arizona_micsupp *micsupp;
int ret;
micsupp = devm_kzalloc(&pdev->dev, sizeof(*micsupp), GFP_KERNEL);
if (micsupp == NULL) {
dev_err(&pdev->dev, "Unable to allocate private data\n");
return -ENOMEM;
}
micsupp->arizona = arizona;
/*
* Since the chip usually supplies itself we provide some
* default init_data for it. This will be overridden with
* platform data if provided.
*/
micsupp->init_data = arizona_micsupp_default;
micsupp->init_data.consumer_supplies = &micsupp->supply;
micsupp->supply.supply = "MICVDD";
micsupp->supply.dev_name = dev_name(arizona->dev);
config.dev = arizona->dev;
config.driver_data = micsupp;
config.regmap = arizona->regmap;
if (arizona->pdata.micvdd)
config.init_data = arizona->pdata.micvdd;
else
config.init_data = &micsupp->init_data;
/* Default to regulated mode until the API supports bypass */
regmap_update_bits(arizona->regmap, ARIZONA_MIC_CHARGE_PUMP_1,
ARIZONA_CPMIC_BYPASS, 0);
micsupp->regulator = regulator_register(&arizona_micsupp, &config);
if (IS_ERR(micsupp->regulator)) {
ret = PTR_ERR(micsupp->regulator);
dev_err(arizona->dev, "Failed to register mic supply: %d\n",
ret);
return ret;
}
platform_set_drvdata(pdev, micsupp);
return 0;
}
static __devexit int arizona_micsupp_remove(struct platform_device *pdev)
{
struct arizona_micsupp *micsupp = platform_get_drvdata(pdev);
regulator_unregister(micsupp->regulator);
return 0;
}
static struct platform_driver arizona_micsupp_driver = {
.probe = arizona_micsupp_probe,
.remove = __devexit_p(arizona_micsupp_remove),
.driver = {
.name = "arizona-micsupp",
.owner = THIS_MODULE,
},
};
module_platform_driver(arizona_micsupp_driver);
/* Module information */
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_DESCRIPTION("Arizona microphone supply driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:arizona-micsupp");
drivers/regulator/core.c
浏览文件 @ 4d460fd3
......@@ -23,6 +23,7 @@
#include <linux/mutex.h>
#include <linux/suspend.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/regulator/of_regulator.h>
......@@ -108,28 +109,6 @@ static const char *rdev_get_name(struct regulator_dev *rdev)
return "";
}
/* gets the regulator for a given consumer device */
static struct regulator *get_device_regulator(struct device *dev)
{
struct regulator *regulator = NULL;
struct regulator_dev *rdev;
mutex_lock(&regulator_list_mutex);
list_for_each_entry(rdev, &regulator_list, list) {
mutex_lock(&rdev->mutex);
list_for_each_entry(regulator, &rdev->consumer_list, list) {
if (regulator->dev == dev) {
mutex_unlock(&rdev->mutex);
mutex_unlock(&regulator_list_mutex);
return regulator;
}
}
mutex_unlock(&rdev->mutex);
}
mutex_unlock(&regulator_list_mutex);
return NULL;
}
/**
* of_get_regulator - get a regulator device node based on supply name
* @dev: Device pointer for the consumer (of regulator) device
......@@ -303,18 +282,6 @@ static int regulator_check_drms(struct regulator_dev *rdev)
return 0;
}
static ssize_t device_requested_uA_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct regulator *regulator;
regulator = get_device_regulator(dev);
if (regulator == NULL)
return 0;
return sprintf(buf, "%d\n", regulator->uA_load);
}
static ssize_t regulator_uV_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
......@@ -427,6 +394,9 @@ static ssize_t regulator_status_show(struct device *dev,
case REGULATOR_STATUS_STANDBY:
label = "standby";
break;
case REGULATOR_STATUS_UNDEFINED:
label = "undefined";
break;
default:
return -ERANGE;
}
......@@ -967,6 +937,14 @@ static int set_machine_constraints(struct regulator_dev *rdev,
}
}
if (rdev->constraints->ramp_delay && ops->set_ramp_delay) {
ret = ops->set_ramp_delay(rdev, rdev->constraints->ramp_delay);
if (ret < 0) {
rdev_err(rdev, "failed to set ramp_delay\n");
goto out;
}
}
print_constraints(rdev);
return 0;
out:
......@@ -1097,48 +1075,29 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
list_add(&regulator->list, &rdev->consumer_list);
if (dev) {
/* create a 'requested_microamps_name' sysfs entry */
size = scnprintf(buf, REG_STR_SIZE,
"microamps_requested_%s-%s",
dev_name(dev), supply_name);
if (size >= REG_STR_SIZE)
goto overflow_err;
regulator->dev = dev;
sysfs_attr_init(&regulator->dev_attr.attr);
regulator->dev_attr.attr.name = kstrdup(buf, GFP_KERNEL);
if (regulator->dev_attr.attr.name == NULL)
goto attr_name_err;
regulator->dev_attr.attr.mode = 0444;
regulator->dev_attr.show = device_requested_uA_show;
err = device_create_file(dev, &regulator->dev_attr);
if (err < 0) {
rdev_warn(rdev, "could not add regulator_dev requested microamps sysfs entry\n");
goto attr_name_err;
}
/* also add a link to the device sysfs entry */
/* Add a link to the device sysfs entry */
size = scnprintf(buf, REG_STR_SIZE, "%s-%s",
dev->kobj.name, supply_name);
if (size >= REG_STR_SIZE)
goto attr_err;
goto overflow_err;
regulator->supply_name = kstrdup(buf, GFP_KERNEL);
if (regulator->supply_name == NULL)
goto attr_err;
goto overflow_err;
err = sysfs_create_link(&rdev->dev.kobj, &dev->kobj,
buf);
if (err) {
rdev_warn(rdev, "could not add device link %s err %d\n",
dev->kobj.name, err);
goto link_name_err;
/* non-fatal */
}
} else {
regulator->supply_name = kstrdup(supply_name, GFP_KERNEL);
if (regulator->supply_name == NULL)
goto attr_err;
goto overflow_err;
}
regulator->debugfs = debugfs_create_dir(regulator->supply_name,
......@@ -1165,12 +1124,6 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
mutex_unlock(&rdev->mutex);
return regulator;
link_name_err:
kfree(regulator->supply_name);
attr_err:
device_remove_file(regulator->dev, &regulator->dev_attr);
attr_name_err:
kfree(regulator->dev_attr.attr.name);
overflow_err:
list_del(&regulator->list);
kfree(regulator);
......@@ -1181,7 +1134,7 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
static int _regulator_get_enable_time(struct regulator_dev *rdev)
{
if (!rdev->desc->ops->enable_time)
return 0;
return rdev->desc->enable_time;
return rdev->desc->ops->enable_time(rdev);
}
......@@ -1420,11 +1373,8 @@ void regulator_put(struct regulator *regulator)
debugfs_remove_recursive(regulator->debugfs);
/* remove any sysfs entries */
if (regulator->dev) {
if (regulator->dev)
sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name);
device_remove_file(regulator->dev, &regulator->dev_attr);
kfree(regulator->dev_attr.attr.name);
}
kfree(regulator->supply_name);
list_del(&regulator->list);
kfree(regulator);
......@@ -1459,19 +1409,61 @@ void devm_regulator_put(struct regulator *regulator)
{
int rc;
rc = devres_destroy(regulator->dev, devm_regulator_release,
rc = devres_release(regulator->dev, devm_regulator_release,
devm_regulator_match, regulator);
if (rc == 0)
regulator_put(regulator);
else
if (rc != 0)
WARN_ON(rc);
}
EXPORT_SYMBOL_GPL(devm_regulator_put);
static int _regulator_do_enable(struct regulator_dev *rdev)
{
int ret, delay;
/* Query before enabling in case configuration dependent. */
ret = _regulator_get_enable_time(rdev);
if (ret >= 0) {
delay = ret;
} else {
rdev_warn(rdev, "enable_time() failed: %d\n", ret);
delay = 0;
}
trace_regulator_enable(rdev_get_name(rdev));
if (rdev->ena_gpio) {
gpio_set_value_cansleep(rdev->ena_gpio,
!rdev->ena_gpio_invert);
rdev->ena_gpio_state = 1;
} else if (rdev->desc->ops->enable) {
ret = rdev->desc->ops->enable(rdev);
if (ret < 0)
return ret;
} else {
return -EINVAL;
}
/* Allow the regulator to ramp; it would be useful to extend
* this for bulk operations so that the regulators can ramp
* together. */
trace_regulator_enable_delay(rdev_get_name(rdev));
if (delay >= 1000) {
mdelay(delay / 1000);
udelay(delay % 1000);
} else if (delay) {
udelay(delay);
}
trace_regulator_enable_complete(rdev_get_name(rdev));
return 0;
}
/* locks held by regulator_enable() */
static int _regulator_enable(struct regulator_dev *rdev)
{
int ret, delay;
int ret;
/* check voltage and requested load before enabling */
if (rdev->constraints &&
......@@ -1485,40 +1477,10 @@ static int _regulator_enable(struct regulator_dev *rdev)
if (!_regulator_can_change_status(rdev))
return -EPERM;
if (!rdev->desc->ops->enable)
return -EINVAL;
/* Query before enabling in case configuration
* dependent. */
ret = _regulator_get_enable_time(rdev);
if (ret >= 0) {
delay = ret;
} else {
rdev_warn(rdev, "enable_time() failed: %d\n",
ret);
delay = 0;
}
trace_regulator_enable(rdev_get_name(rdev));
/* Allow the regulator to ramp; it would be useful
* to extend this for bulk operations so that the
* regulators can ramp together. */
ret = rdev->desc->ops->enable(rdev);
ret = _regulator_do_enable(rdev);
if (ret < 0)
return ret;
trace_regulator_enable_delay(rdev_get_name(rdev));
if (delay >= 1000) {
mdelay(delay / 1000);
udelay(delay % 1000);
} else if (delay) {
udelay(delay);
}
trace_regulator_enable_complete(rdev_get_name(rdev));
} else if (ret < 0) {
rdev_err(rdev, "is_enabled() failed: %d\n", ret);
return ret;
......@@ -1567,6 +1529,30 @@ int regulator_enable(struct regulator *regulator)
}
EXPORT_SYMBOL_GPL(regulator_enable);
static int _regulator_do_disable(struct regulator_dev *rdev)
{
int ret;
trace_regulator_disable(rdev_get_name(rdev));
if (rdev->ena_gpio) {
gpio_set_value_cansleep(rdev->ena_gpio,
rdev->ena_gpio_invert);
rdev->ena_gpio_state = 0;
} else if (rdev->desc->ops->disable) {
ret = rdev->desc->ops->disable(rdev);
if (ret != 0)
return ret;
}
trace_regulator_disable_complete(rdev_get_name(rdev));
_notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE,
NULL);
return 0;
}
/* locks held by regulator_disable() */
static int _regulator_disable(struct regulator_dev *rdev)
{
......@@ -1581,20 +1567,12 @@ static int _regulator_disable(struct regulator_dev *rdev)
(rdev->constraints && !rdev->constraints->always_on)) {
/* we are last user */
if (_regulator_can_change_status(rdev) &&
rdev->desc->ops->disable) {
trace_regulator_disable(rdev_get_name(rdev));
ret = rdev->desc->ops->disable(rdev);
if (_regulator_can_change_status(rdev)) {
ret = _regulator_do_disable(rdev);
if (ret < 0) {
rdev_err(rdev, "failed to disable\n");
return ret;
}
trace_regulator_disable_complete(rdev_get_name(rdev));
_notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE,
NULL);
}
rdev->use_count = 0;
......@@ -1812,6 +1790,10 @@ EXPORT_SYMBOL_GPL(regulator_disable_regmap);
static int _regulator_is_enabled(struct regulator_dev *rdev)
{
/* A GPIO control always takes precedence */
if (rdev->ena_gpio)
return rdev->ena_gpio_state;
/* If we don't know then assume that the regulator is always on */
if (!rdev->desc->ops->is_enabled)
return 1;
......@@ -1882,6 +1864,31 @@ int regulator_list_voltage_linear(struct regulator_dev *rdev,
}
EXPORT_SYMBOL_GPL(regulator_list_voltage_linear);
/**
* regulator_list_voltage_table - List voltages with table based mapping
*
* @rdev: Regulator device
* @selector: Selector to convert into a voltage
*
* Regulators with table based mapping between voltages and
* selectors can set volt_table in the regulator descriptor
* and then use this function as their list_voltage() operation.
*/
int regulator_list_voltage_table(struct regulator_dev *rdev,
unsigned int selector)
{
if (!rdev->desc->volt_table) {
BUG_ON(!rdev->desc->volt_table);
return -EINVAL;
}
if (selector >= rdev->desc->n_voltages)
return -EINVAL;
return rdev->desc->volt_table[selector];
}
EXPORT_SYMBOL_GPL(regulator_list_voltage_table);
/**
* regulator_list_voltage - enumerate supported voltages
* @regulator: regulator source
......@@ -1928,8 +1935,18 @@ EXPORT_SYMBOL_GPL(regulator_list_voltage);
int regulator_is_supported_voltage(struct regulator *regulator,
int min_uV, int max_uV)
{
struct regulator_dev *rdev = regulator->rdev;
int i, voltages, ret;
/* If we can't change voltage check the current voltage */
if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
ret = regulator_get_voltage(regulator);
if (ret >= 0)
return (min_uV >= ret && ret <= max_uV);
else
return ret;
}
ret = regulator_count_voltages(regulator);
if (ret < 0)
return ret;
......@@ -2045,6 +2062,14 @@ int regulator_map_voltage_linear(struct regulator_dev *rdev,
{
int ret, voltage;
/* Allow uV_step to be 0 for fixed voltage */
if (rdev->desc->n_voltages == 1 && rdev->desc->uV_step == 0) {
if (min_uV <= rdev->desc->min_uV && rdev->desc->min_uV <= max_uV)
return 0;
else
return -EINVAL;
}
if (!rdev->desc->uV_step) {
BUG_ON(!rdev->desc->uV_step);
return -EINVAL;
......@@ -2071,7 +2096,7 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
{
int ret;
int delay = 0;
int best_val;
int best_val = 0;
unsigned int selector;
int old_selector = -1;
......@@ -2084,7 +2109,8 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
* If we can't obtain the old selector there is not enough
* info to call set_voltage_time_sel().
*/
if (rdev->desc->ops->set_voltage_time_sel &&
if (_regulator_is_enabled(rdev) &&
rdev->desc->ops->set_voltage_time_sel &&
rdev->desc->ops->get_voltage_sel) {
old_selector = rdev->desc->ops->get_voltage_sel(rdev);
if (old_selector < 0)
......@@ -2094,29 +2120,45 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
if (rdev->desc->ops->set_voltage) {
ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV,
&selector);
if (ret >= 0) {
if (rdev->desc->ops->list_voltage)
best_val = rdev->desc->ops->list_voltage(rdev,
selector);
else
best_val = _regulator_get_voltage(rdev);
}
} else if (rdev->desc->ops->set_voltage_sel) {
if (rdev->desc->ops->map_voltage)
if (rdev->desc->ops->map_voltage) {
ret = rdev->desc->ops->map_voltage(rdev, min_uV,
max_uV);
else
ret = regulator_map_voltage_iterate(rdev, min_uV,
max_uV);
} else {
if (rdev->desc->ops->list_voltage ==
regulator_list_voltage_linear)
ret = regulator_map_voltage_linear(rdev,
min_uV, max_uV);
else
ret = regulator_map_voltage_iterate(rdev,
min_uV, max_uV);
}
if (ret >= 0) {
selector = ret;
ret = rdev->desc->ops->set_voltage_sel(rdev, ret);
best_val = rdev->desc->ops->list_voltage(rdev, ret);
if (min_uV <= best_val && max_uV >= best_val) {
selector = ret;
ret = rdev->desc->ops->set_voltage_sel(rdev,
ret);
} else {
ret = -EINVAL;
}
}
} else {
ret = -EINVAL;
}
if (rdev->desc->ops->list_voltage)
best_val = rdev->desc->ops->list_voltage(rdev, selector);
else
best_val = -1;
/* Call set_voltage_time_sel if successfully obtained old_selector */
if (ret == 0 && old_selector >= 0 &&
if (ret == 0 && _regulator_is_enabled(rdev) && old_selector >= 0 &&
rdev->desc->ops->set_voltage_time_sel) {
delay = rdev->desc->ops->set_voltage_time_sel(rdev,
......@@ -2126,19 +2168,19 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
delay);
delay = 0;
}
}
/* Insert any necessary delays */
if (delay >= 1000) {
mdelay(delay / 1000);
udelay(delay % 1000);
} else if (delay) {
udelay(delay);
/* Insert any necessary delays */
if (delay >= 1000) {
mdelay(delay / 1000);
udelay(delay % 1000);
} else if (delay) {
udelay(delay);
}
}
if (ret == 0)
if (ret == 0 && best_val >= 0)
_notifier_call_chain(rdev, REGULATOR_EVENT_VOLTAGE_CHANGE,
NULL);
(void *)best_val);
trace_regulator_set_voltage_complete(rdev_get_name(rdev), best_val);
......@@ -2248,6 +2290,46 @@ int regulator_set_voltage_time(struct regulator *regulator,
}
EXPORT_SYMBOL_GPL(regulator_set_voltage_time);
/**
*regulator_set_voltage_time_sel - get raise/fall time
* @regulator: regulator source
* @old_selector: selector for starting voltage
* @new_selector: selector for target voltage
*
* Provided with the starting and target voltage selectors, this function
* returns time in microseconds required to rise or fall to this new voltage
*
* Drivers providing ramp_delay in regulation_constraints can use this as their
* set_voltage_time_sel() operation.
*/
int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
unsigned int old_selector,
unsigned int new_selector)
{
unsigned int ramp_delay = 0;
int old_volt, new_volt;
if (rdev->constraints->ramp_delay)
ramp_delay = rdev->constraints->ramp_delay;
else if (rdev->desc->ramp_delay)
ramp_delay = rdev->desc->ramp_delay;
if (ramp_delay == 0) {
rdev_warn(rdev, "ramp_delay not set\n");
return 0;
}
/* sanity check */
if (!rdev->desc->ops->list_voltage)
return -EINVAL;
old_volt = rdev->desc->ops->list_voltage(rdev, old_selector);
new_volt = rdev->desc->ops->list_voltage(rdev, new_selector);
return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay);
}
EXPORT_SYMBOL_GPL(regulator_set_voltage_time_sel);
/**
* regulator_sync_voltage - re-apply last regulator output voltage
* @regulator: regulator source
......@@ -2628,7 +2710,7 @@ static void _notifier_call_chain(struct regulator_dev *rdev,
unsigned long event, void *data)
{
/* call rdev chain first */
blocking_notifier_call_chain(&rdev->notifier, event, NULL);
blocking_notifier_call_chain(&rdev->notifier, event, data);
}
/**
......@@ -2909,10 +2991,10 @@ int regulator_mode_to_status(unsigned int mode)
return REGULATOR_STATUS_NORMAL;
case REGULATOR_MODE_IDLE:
return REGULATOR_STATUS_IDLE;
case REGULATOR_STATUS_STANDBY:
case REGULATOR_MODE_STANDBY:
return REGULATOR_STATUS_STANDBY;
default:
return 0;
return REGULATOR_STATUS_UNDEFINED;
}
}
EXPORT_SYMBOL_GPL(regulator_mode_to_status);
......@@ -3105,7 +3187,10 @@ regulator_register(const struct regulator_desc *regulator_desc,
rdev->reg_data = config->driver_data;
rdev->owner = regulator_desc->owner;
rdev->desc = regulator_desc;
rdev->regmap = config->regmap;
if (config->regmap)
rdev->regmap = config->regmap;
else
rdev->regmap = dev_get_regmap(dev, NULL);
INIT_LIST_HEAD(&rdev->consumer_list);
INIT_LIST_HEAD(&rdev->list);
BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier);
......@@ -3132,6 +3217,26 @@ regulator_register(const struct regulator_desc *regulator_desc,
dev_set_drvdata(&rdev->dev, rdev);
if (config->ena_gpio) {
ret = gpio_request_one(config->ena_gpio,
GPIOF_DIR_OUT | config->ena_gpio_flags,
rdev_get_name(rdev));
if (ret != 0) {
rdev_err(rdev, "Failed to request enable GPIO%d: %d\n",
config->ena_gpio, ret);
goto clean;
}
rdev->ena_gpio = config->ena_gpio;
rdev->ena_gpio_invert = config->ena_gpio_invert;
if (config->ena_gpio_flags & GPIOF_OUT_INIT_HIGH)
rdev->ena_gpio_state = 1;
if (rdev->ena_gpio_invert)
rdev->ena_gpio_state = !rdev->ena_gpio_state;
}
/* set regulator constraints */
if (init_data)
constraints = &init_data->constraints;
......@@ -3200,6 +3305,8 @@ regulator_register(const struct regulator_desc *regulator_desc,
scrub:
if (rdev->supply)
regulator_put(rdev->supply);
if (rdev->ena_gpio)
gpio_free(rdev->ena_gpio);
kfree(rdev->constraints);
device_unregister(&rdev->dev);
/* device core frees rdev */
......@@ -3233,6 +3340,8 @@ void regulator_unregister(struct regulator_dev *rdev)
unset_regulator_supplies(rdev);
list_del(&rdev->list);
kfree(rdev->constraints);
if (rdev->ena_gpio)
gpio_free(rdev->ena_gpio);
device_unregister(&rdev->dev);
mutex_unlock(&regulator_list_mutex);
}
......@@ -3472,6 +3581,15 @@ static int __init regulator_init_complete(void)
struct regulation_constraints *c;
int enabled, ret;
/*
* Since DT doesn't provide an idiomatic mechanism for
* enabling full constraints and since it's much more natural
* with DT to provide them just assume that a DT enabled
* system has full constraints.
*/
if (of_have_populated_dt())
has_full_constraints = true;
mutex_lock(&regulator_list_mutex);
/* If we have a full configuration then disable any regulators
......
drivers/regulator/da903x.c
浏览文件 @ 4d460fd3
......@@ -107,6 +107,9 @@ static int da903x_set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
struct device *da9034_dev = to_da903x_dev(rdev);
uint8_t val, mask;
if (rdev->desc->n_voltages == 1)
return -EINVAL;
val = selector << info->vol_shift;
mask = ((1 << info->vol_nbits) - 1) << info->vol_shift;
......@@ -120,6 +123,9 @@ static int da903x_get_voltage_sel(struct regulator_dev *rdev)
uint8_t val, mask;
int ret;
if (rdev->desc->n_voltages == 1)
return 0;
ret = da903x_read(da9034_dev, info->vol_reg, &val);
if (ret)
return ret;
......
drivers/regulator/da9052-regulator.c
浏览文件 @ 4d460fd3
......@@ -405,12 +405,12 @@ static int __devinit da9052_regulator_probe(struct platform_device *pdev)
if (!nproot)
return -ENODEV;
for (np = of_get_next_child(nproot, NULL); np;
np = of_get_next_child(nproot, np)) {
for_each_child_of_node(nproot, np) {
if (!of_node_cmp(np->name,
regulator->info->reg_desc.name)) {
config.init_data = of_get_regulator_init_data(
&pdev->dev, np);
config.of_node = np;
break;
}
}
......
drivers/regulator/fixed-helper.c
浏览文件 @ 4d460fd3
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/platform_device.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
......@@ -13,17 +14,20 @@ static void regulator_fixed_release(struct device *dev)
{
struct fixed_regulator_data *data = container_of(dev,
struct fixed_regulator_data, pdev.dev);
kfree(data->cfg.supply_name);
kfree(data);
}
/**
* regulator_register_fixed - register a no-op fixed regulator
* regulator_register_fixed_name - register a no-op fixed regulator
* @id: platform device id
* @name: name to be used for the regulator
* @supplies: consumers for this regulator
* @num_supplies: number of consumers
* @uv: voltage in microvolts
*/
struct platform_device *regulator_register_fixed(int id,
struct regulator_consumer_supply *supplies, int num_supplies)
struct platform_device *regulator_register_always_on(int id, const char *name,
struct regulator_consumer_supply *supplies, int num_supplies, int uv)
{
struct fixed_regulator_data *data;
......@@ -31,8 +35,13 @@ struct platform_device *regulator_register_fixed(int id,
if (!data)
return NULL;
data->cfg.supply_name = "fixed-dummy";
data->cfg.microvolts = 0;
data->cfg.supply_name = kstrdup(name, GFP_KERNEL);
if (!data->cfg.supply_name) {
kfree(data);
return NULL;
}
data->cfg.microvolts = uv;
data->cfg.gpio = -EINVAL;
data->cfg.enabled_at_boot = 1;
data->cfg.init_data = &data->init_data;
......
drivers/regulator/fixed.c
浏览文件 @ 4d460fd3
......@@ -35,10 +35,6 @@ struct fixed_voltage_data {
struct regulator_desc desc;
struct regulator_dev *dev;
int microvolts;
int gpio;
unsigned startup_delay;
bool enable_high;
bool is_enabled;
};
......@@ -61,11 +57,11 @@ of_get_fixed_voltage_config(struct device *dev)
config = devm_kzalloc(dev, sizeof(struct fixed_voltage_config),
GFP_KERNEL);
if (!config)
return NULL;
return ERR_PTR(-ENOMEM);
config->init_data = of_get_regulator_init_data(dev, dev->of_node);
if (!config->init_data)
return NULL;
return ERR_PTR(-EINVAL);
init_data = config->init_data;
init_data->constraints.apply_uV = 0;
......@@ -76,13 +72,26 @@ of_get_fixed_voltage_config(struct device *dev)
} else {
dev_err(dev,
"Fixed regulator specified with variable voltages\n");
return NULL;
return ERR_PTR(-EINVAL);
}
if (init_data->constraints.boot_on)
config->enabled_at_boot = true;
config->gpio = of_get_named_gpio(np, "gpio", 0);
/*
* of_get_named_gpio() currently returns ENODEV rather than
* EPROBE_DEFER. This code attempts to be compatible with both
* for now; the ENODEV check can be removed once the API is fixed.
* of_get_named_gpio() doesn't differentiate between a missing
* property (which would be fine here, since the GPIO is optional)
* and some other error. Patches have been posted for both issues.
* Once they are check in, we should replace this with:
* if (config->gpio < 0 && config->gpio != -ENOENT)
*/
if ((config->gpio == -ENODEV) || (config->gpio == -EPROBE_DEFER))
return ERR_PTR(-EPROBE_DEFER);
delay = of_get_property(np, "startup-delay-us", NULL);
if (delay)
config->startup_delay = be32_to_cpu(*delay);
......@@ -93,41 +102,10 @@ of_get_fixed_voltage_config(struct device *dev)
if (of_find_property(np, "gpio-open-drain", NULL))
config->gpio_is_open_drain = true;
return config;
}
static int fixed_voltage_is_enabled(struct regulator_dev *dev)
{
struct fixed_voltage_data *data = rdev_get_drvdata(dev);
return data->is_enabled;
}
static int fixed_voltage_enable(struct regulator_dev *dev)
{
struct fixed_voltage_data *data = rdev_get_drvdata(dev);
gpio_set_value_cansleep(data->gpio, data->enable_high);
data->is_enabled = true;
return 0;
}
static int fixed_voltage_disable(struct regulator_dev *dev)
{
struct fixed_voltage_data *data = rdev_get_drvdata(dev);
gpio_set_value_cansleep(data->gpio, !data->enable_high);
data->is_enabled = false;
return 0;
}
if (of_find_property(np, "vin-supply", NULL))
config->input_supply = "vin";
static int fixed_voltage_enable_time(struct regulator_dev *dev)
{
struct fixed_voltage_data *data = rdev_get_drvdata(dev);
return data->startup_delay;
return config;
}
static int fixed_voltage_get_voltage(struct regulator_dev *dev)
......@@ -151,15 +129,6 @@ static int fixed_voltage_list_voltage(struct regulator_dev *dev,
return data->microvolts;
}
static struct regulator_ops fixed_voltage_gpio_ops = {
.is_enabled = fixed_voltage_is_enabled,
.enable = fixed_voltage_enable,
.disable = fixed_voltage_disable,
.enable_time = fixed_voltage_enable_time,
.get_voltage = fixed_voltage_get_voltage,
.list_voltage = fixed_voltage_list_voltage,
};
static struct regulator_ops fixed_voltage_ops = {
.get_voltage = fixed_voltage_get_voltage,
.list_voltage = fixed_voltage_list_voltage,
......@@ -172,10 +141,13 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
struct regulator_config cfg = { };
int ret;
if (pdev->dev.of_node)
if (pdev->dev.of_node) {
config = of_get_fixed_voltage_config(&pdev->dev);
else
if (IS_ERR(config))
return PTR_ERR(config);
} else {
config = pdev->dev.platform_data;
}
if (!config)
return -ENOMEM;
......@@ -196,59 +168,44 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
}
drvdata->desc.type = REGULATOR_VOLTAGE;
drvdata->desc.owner = THIS_MODULE;
drvdata->desc.ops = &fixed_voltage_ops;
if (config->microvolts)
drvdata->desc.n_voltages = 1;
drvdata->desc.enable_time = config->startup_delay;
drvdata->microvolts = config->microvolts;
drvdata->gpio = config->gpio;
drvdata->startup_delay = config->startup_delay;
if (gpio_is_valid(config->gpio)) {
int gpio_flag;
drvdata->enable_high = config->enable_high;
/* FIXME: Remove below print warning
*
* config->gpio must be set to -EINVAL by platform code if
* GPIO control is not required. However, early adopters
* not requiring GPIO control may forget to initialize
* config->gpio to -EINVAL. This will cause GPIO 0 to be used
* for GPIO control.
*
* This warning will be removed once there are a couple of users
* for this driver.
*/
if (!config->gpio)
dev_warn(&pdev->dev,
"using GPIO 0 for regulator enable control\n");
/*
* set output direction without changing state
* to prevent glitch
*/
drvdata->is_enabled = config->enabled_at_boot;
ret = drvdata->is_enabled ?
config->enable_high : !config->enable_high;
gpio_flag = ret ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
if (config->gpio_is_open_drain)
gpio_flag |= GPIOF_OPEN_DRAIN;
ret = gpio_request_one(config->gpio, gpio_flag,
config->supply_name);
if (ret) {
if (config->input_supply) {
drvdata->desc.supply_name = kstrdup(config->input_supply,
GFP_KERNEL);
if (!drvdata->desc.supply_name) {
dev_err(&pdev->dev,
"Could not obtain regulator enable GPIO %d: %d\n",
config->gpio, ret);
"Failed to allocate input supply\n");
ret = -ENOMEM;
goto err_name;
}
}
if (config->microvolts)
drvdata->desc.n_voltages = 1;
drvdata->desc.ops = &fixed_voltage_gpio_ops;
drvdata->microvolts = config->microvolts;
if (config->gpio >= 0)
cfg.ena_gpio = config->gpio;
cfg.ena_gpio_invert = !config->enable_high;
if (config->enabled_at_boot) {
if (config->enable_high) {
cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
} else {
cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
}
} else {
drvdata->desc.ops = &fixed_voltage_ops;
if (config->enable_high) {
cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
} else {
cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
}
}
if (config->gpio_is_open_drain)
cfg.ena_gpio_flags |= GPIOF_OPEN_DRAIN;
cfg.dev = &pdev->dev;
cfg.init_data = config->init_data;
......@@ -259,7 +216,7 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
if (IS_ERR(drvdata->dev)) {
ret = PTR_ERR(drvdata->dev);
dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret);
goto err_gpio;
goto err_input;
}
platform_set_drvdata(pdev, drvdata);
......@@ -269,9 +226,8 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
return 0;
err_gpio:
if (gpio_is_valid(config->gpio))
gpio_free(config->gpio);
err_input:
kfree(drvdata->desc.supply_name);
err_name:
kfree(drvdata->desc.name);
err:
......@@ -283,8 +239,7 @@ static int __devexit reg_fixed_voltage_remove(struct platform_device *pdev)
struct fixed_voltage_data *drvdata = platform_get_drvdata(pdev);
regulator_unregister(drvdata->dev);
if (gpio_is_valid(drvdata->gpio))
gpio_free(drvdata->gpio);
kfree(drvdata->desc.supply_name);
kfree(drvdata->desc.name);
return 0;
......@@ -296,8 +251,6 @@ static const struct of_device_id fixed_of_match[] __devinitconst = {
{},
};
MODULE_DEVICE_TABLE(of, fixed_of_match);
#else
#define fixed_of_match NULL
#endif
static struct platform_driver regulator_fixed_voltage_driver = {
......@@ -306,7 +259,7 @@ static struct platform_driver regulator_fixed_voltage_driver = {
.driver = {
.name = "reg-fixed-voltage",
.owner = THIS_MODULE,
.of_match_table = fixed_of_match,
.of_match_table = of_match_ptr(fixed_of_match),
},
};
......
drivers/regulator/gpio-regulator.c
浏览文件 @ 4d460fd3
......@@ -36,11 +36,6 @@ struct gpio_regulator_data {
struct regulator_desc desc;
struct regulator_dev *dev;
int enable_gpio;
bool enable_high;
bool is_enabled;
unsigned startup_delay;
struct gpio *gpios;
int nr_gpios;
......@@ -50,44 +45,6 @@ struct gpio_regulator_data {
int state;
};
static int gpio_regulator_is_enabled(struct regulator_dev *dev)
{
struct gpio_regulator_data *data = rdev_get_drvdata(dev);
return data->is_enabled;
}
static int gpio_regulator_enable(struct regulator_dev *dev)
{
struct gpio_regulator_data *data = rdev_get_drvdata(dev);
if (gpio_is_valid(data->enable_gpio)) {
gpio_set_value_cansleep(data->enable_gpio, data->enable_high);
data->is_enabled = true;
}
return 0;
}
static int gpio_regulator_disable(struct regulator_dev *dev)
{
struct gpio_regulator_data *data = rdev_get_drvdata(dev);
if (gpio_is_valid(data->enable_gpio)) {
gpio_set_value_cansleep(data->enable_gpio, !data->enable_high);
data->is_enabled = false;
}
return 0;
}
static int gpio_regulator_enable_time(struct regulator_dev *dev)
{
struct gpio_regulator_data *data = rdev_get_drvdata(dev);
return data->startup_delay;
}
static int gpio_regulator_get_value(struct regulator_dev *dev)
{
struct gpio_regulator_data *data = rdev_get_drvdata(dev);
......@@ -153,20 +110,12 @@ static int gpio_regulator_set_current_limit(struct regulator_dev *dev,
}
static struct regulator_ops gpio_regulator_voltage_ops = {
.is_enabled = gpio_regulator_is_enabled,
.enable = gpio_regulator_enable,
.disable = gpio_regulator_disable,
.enable_time = gpio_regulator_enable_time,
.get_voltage = gpio_regulator_get_value,
.set_voltage = gpio_regulator_set_voltage,
.list_voltage = gpio_regulator_list_voltage,
};
static struct regulator_ops gpio_regulator_current_ops = {
.is_enabled = gpio_regulator_is_enabled,
.enable = gpio_regulator_enable,
.disable = gpio_regulator_disable,
.enable_time = gpio_regulator_enable_time,
.get_current_limit = gpio_regulator_get_value,
.set_current_limit = gpio_regulator_set_current_limit,
};
......@@ -213,6 +162,7 @@ static int __devinit gpio_regulator_probe(struct platform_device *pdev)
drvdata->nr_states = config->nr_states;
drvdata->desc.owner = THIS_MODULE;
drvdata->desc.enable_time = config->startup_delay;
/* handle regulator type*/
switch (config->type) {
......@@ -232,52 +182,12 @@ static int __devinit gpio_regulator_probe(struct platform_device *pdev)
break;
}
drvdata->enable_gpio = config->enable_gpio;
drvdata->startup_delay = config->startup_delay;
if (gpio_is_valid(config->enable_gpio)) {
drvdata->enable_high = config->enable_high;
ret = gpio_request(config->enable_gpio, config->supply_name);
if (ret) {
dev_err(&pdev->dev,
"Could not obtain regulator enable GPIO %d: %d\n",
config->enable_gpio, ret);
goto err_memstate;
}
/* set output direction without changing state
* to prevent glitch
*/
if (config->enabled_at_boot) {
drvdata->is_enabled = true;
ret = gpio_direction_output(config->enable_gpio,
config->enable_high);
} else {
drvdata->is_enabled = false;
ret = gpio_direction_output(config->enable_gpio,
!config->enable_high);
}
if (ret) {
dev_err(&pdev->dev,
"Could not configure regulator enable GPIO %d direction: %d\n",
config->enable_gpio, ret);
goto err_enablegpio;
}
} else {
/* Regulator without GPIO control is considered
* always enabled
*/
drvdata->is_enabled = true;
}
drvdata->nr_gpios = config->nr_gpios;
ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios);
if (ret) {
dev_err(&pdev->dev,
"Could not obtain regulator setting GPIOs: %d\n", ret);
goto err_enablegpio;
goto err_memstate;
}
/* build initial state from gpio init data. */
......@@ -292,6 +202,21 @@ static int __devinit gpio_regulator_probe(struct platform_device *pdev)
cfg.init_data = config->init_data;
cfg.driver_data = drvdata;
if (config->enable_gpio >= 0)
cfg.ena_gpio = config->enable_gpio;
cfg.ena_gpio_invert = !config->enable_high;
if (config->enabled_at_boot) {
if (config->enable_high)
cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
else
cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
} else {
if (config->enable_high)
cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
else
cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
}
drvdata->dev = regulator_register(&drvdata->desc, &cfg);
if (IS_ERR(drvdata->dev)) {
ret = PTR_ERR(drvdata->dev);
......@@ -305,9 +230,6 @@ static int __devinit gpio_regulator_probe(struct platform_device *pdev)
err_stategpio:
gpio_free_array(drvdata->gpios, drvdata->nr_gpios);
err_enablegpio:
if (gpio_is_valid(config->enable_gpio))
gpio_free(config->enable_gpio);
err_memstate:
kfree(drvdata->states);
err_memgpio:
......@@ -329,9 +251,6 @@ static int __devexit gpio_regulator_remove(struct platform_device *pdev)
kfree(drvdata->states);
kfree(drvdata->gpios);
if (gpio_is_valid(drvdata->enable_gpio))
gpio_free(drvdata->enable_gpio);
kfree(drvdata->desc.name);
return 0;
......
drivers/regulator/isl6271a-regulator.c
浏览文件 @ 4d460fd3
......@@ -75,19 +75,12 @@ static struct regulator_ops isl_core_ops = {
static int isl6271a_get_fixed_voltage(struct regulator_dev *dev)
{
int id = rdev_get_id(dev);
return (id == 1) ? 1100000 : 1300000;
}
static int isl6271a_list_fixed_voltage(struct regulator_dev *dev, unsigned selector)
{
int id = rdev_get_id(dev);
return (id == 1) ? 1100000 : 1300000;
return dev->desc->min_uV;
}
static struct regulator_ops isl_fixed_ops = {
.get_voltage = isl6271a_get_fixed_voltage,
.list_voltage = isl6271a_list_fixed_voltage,
.list_voltage = regulator_list_voltage_linear,
};
static const struct regulator_desc isl_rd[] = {
......@@ -107,6 +100,7 @@ static const struct regulator_desc isl_rd[] = {
.ops = &isl_fixed_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.min_uV = 1100000,
}, {
.name = "LDO2",
.id = 2,
......@@ -114,6 +108,7 @@ static const struct regulator_desc isl_rd[] = {
.ops = &isl_fixed_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.min_uV = 1300000,
},
};
......
drivers/regulator/lp3971.c
浏览文件 @ 4d460fd3
......@@ -65,11 +65,11 @@ static const int buck_base_addr[] = {
#define LP3971_BUCK_TARGET_VOL1_REG(x) (buck_base_addr[x])
#define LP3971_BUCK_TARGET_VOL2_REG(x) (buck_base_addr[x]+1)
static const int buck_voltage_map[] = {
0, 800, 850, 900, 950, 1000, 1050, 1100,
1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500,
1550, 1600, 1650, 1700, 1800, 1900, 2500, 2800,
3000, 3300,
static const unsigned int buck_voltage_map[] = {
0, 800000, 850000, 900000, 950000, 1000000, 1050000, 1100000,
1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000,
1550000, 1600000, 1650000, 1700000, 1800000, 1900000, 2500000, 2800000,
3000000, 3300000,
};
#define BUCK_TARGET_VOL_MASK 0x3f
......@@ -98,39 +98,19 @@ static const int buck_voltage_map[] = {
#define LDO_VOL_CONTR_SHIFT(x) ((x & 1) << 2)
#define LDO_VOL_CONTR_MASK 0x0f
static const int ldo45_voltage_map[] = {
1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350,
1400, 1500, 1800, 1900, 2500, 2800, 3000, 3300,
static const unsigned int ldo45_voltage_map[] = {
1000000, 1050000, 1100000, 1150000, 1200000, 1250000, 1300000, 1350000,
1400000, 1500000, 1800000, 1900000, 2500000, 2800000, 3000000, 3300000,
};
static const int ldo123_voltage_map[] = {
1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500,
2600, 2700, 2800, 2900, 3000, 3100, 3200, 3300,
static const unsigned int ldo123_voltage_map[] = {
1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000,
2600000, 2700000, 2800000, 2900000, 3000000, 3100000, 3200000, 3300000,
};
static const int *ldo_voltage_map[] = {
ldo123_voltage_map, /* LDO1 */
ldo123_voltage_map, /* LDO2 */
ldo123_voltage_map, /* LDO3 */
ldo45_voltage_map, /* LDO4 */
ldo45_voltage_map, /* LDO5 */
};
#define LDO_VOL_VALUE_MAP(x) (ldo_voltage_map[(x - LP3971_LDO1)])
#define LDO_VOL_MIN_IDX 0x00
#define LDO_VOL_MAX_IDX 0x0f
static int lp3971_ldo_list_voltage(struct regulator_dev *dev, unsigned index)
{
int ldo = rdev_get_id(dev) - LP3971_LDO1;
if (index > LDO_VOL_MAX_IDX)
return -EINVAL;
return 1000 * LDO_VOL_VALUE_MAP(ldo)[index];
}
static int lp3971_ldo_is_enabled(struct regulator_dev *dev)
{
struct lp3971 *lp3971 = rdev_get_drvdata(dev);
......@@ -169,7 +149,7 @@ static int lp3971_ldo_get_voltage(struct regulator_dev *dev)
reg = lp3971_reg_read(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo));
val = (reg >> LDO_VOL_CONTR_SHIFT(ldo)) & LDO_VOL_CONTR_MASK;
return 1000 * LDO_VOL_VALUE_MAP(ldo)[val];
return dev->desc->volt_table[val];
}
static int lp3971_ldo_set_voltage_sel(struct regulator_dev *dev,
......@@ -184,7 +164,7 @@ static int lp3971_ldo_set_voltage_sel(struct regulator_dev *dev,
}
static struct regulator_ops lp3971_ldo_ops = {
.list_voltage = lp3971_ldo_list_voltage,
.list_voltage = regulator_list_voltage_table,
.is_enabled = lp3971_ldo_is_enabled,
.enable = lp3971_ldo_enable,
.disable = lp3971_ldo_disable,
......@@ -192,14 +172,6 @@ static struct regulator_ops lp3971_ldo_ops = {
.set_voltage_sel = lp3971_ldo_set_voltage_sel,
};
static int lp3971_dcdc_list_voltage(struct regulator_dev *dev, unsigned index)
{
if (index < BUCK_TARGET_VOL_MIN_IDX || index > BUCK_TARGET_VOL_MAX_IDX)
return -EINVAL;
return 1000 * buck_voltage_map[index];
}
static int lp3971_dcdc_is_enabled(struct regulator_dev *dev)
{
struct lp3971 *lp3971 = rdev_get_drvdata(dev);
......@@ -240,7 +212,7 @@ static int lp3971_dcdc_get_voltage(struct regulator_dev *dev)
reg &= BUCK_TARGET_VOL_MASK;
if (reg <= BUCK_TARGET_VOL_MAX_IDX)
val = 1000 * buck_voltage_map[reg];
val = buck_voltage_map[reg];
else {
val = 0;
dev_warn(&dev->dev, "chip reported incorrect voltage value.\n");
......@@ -273,7 +245,7 @@ static int lp3971_dcdc_set_voltage_sel(struct regulator_dev *dev,
}
static struct regulator_ops lp3971_dcdc_ops = {
.list_voltage = lp3971_dcdc_list_voltage,
.list_voltage = regulator_list_voltage_table,
.is_enabled = lp3971_dcdc_is_enabled,
.enable = lp3971_dcdc_enable,
.disable = lp3971_dcdc_disable,
......@@ -287,6 +259,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3971_LDO1,
.ops = &lp3971_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo123_voltage_map),
.volt_table = ldo123_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
......@@ -295,6 +268,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3971_LDO2,
.ops = &lp3971_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo123_voltage_map),
.volt_table = ldo123_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
......@@ -303,6 +277,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3971_LDO3,
.ops = &lp3971_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo123_voltage_map),
.volt_table = ldo123_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
......@@ -311,6 +286,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3971_LDO4,
.ops = &lp3971_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo45_voltage_map),
.volt_table = ldo45_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
......@@ -319,6 +295,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3971_LDO5,
.ops = &lp3971_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo45_voltage_map),
.volt_table = ldo45_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
......@@ -327,6 +304,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3971_DCDC1,
.ops = &lp3971_dcdc_ops,
.n_voltages = ARRAY_SIZE(buck_voltage_map),
.volt_table = buck_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
......@@ -335,6 +313,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3971_DCDC2,
.ops = &lp3971_dcdc_ops,
.n_voltages = ARRAY_SIZE(buck_voltage_map),
.volt_table = buck_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
......@@ -343,6 +322,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3971_DCDC3,
.ops = &lp3971_dcdc_ops,
.n_voltages = ARRAY_SIZE(buck_voltage_map),
.volt_table = buck_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
......
drivers/regulator/lp3972.c
浏览文件 @ 4d460fd3
......@@ -74,54 +74,40 @@ struct lp3972 {
#define LP3972_OVER2_LDO4_EN BIT(4)
#define LP3972_OVER1_S_EN BIT(2)
static const int ldo1_voltage_map[] = {
1700, 1725, 1750, 1775, 1800, 1825, 1850, 1875,
1900, 1925, 1950, 1975, 2000,
static const unsigned int ldo1_voltage_map[] = {
1700000, 1725000, 1750000, 1775000, 1800000, 1825000, 1850000, 1875000,
1900000, 1925000, 1950000, 1975000, 2000000,
};
static const int ldo23_voltage_map[] = {
1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500,
2600, 2700, 2800, 2900, 3000, 3100, 3200, 3300,
static const unsigned int ldo23_voltage_map[] = {
1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000,
2600000, 2700000, 2800000, 2900000, 3000000, 3100000, 3200000, 3300000,
};
static const int ldo4_voltage_map[] = {
1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350,
1400, 1500, 1800, 1900, 2500, 2800, 3000, 3300,
static const unsigned int ldo4_voltage_map[] = {
1000000, 1050000, 1100000, 1150000, 1200000, 1250000, 1300000, 1350000,
1400000, 1500000, 1800000, 1900000, 2500000, 2800000, 3000000, 3300000,
};
static const int ldo5_voltage_map[] = {
0, 0, 0, 0, 0, 850, 875, 900,
925, 950, 975, 1000, 1025, 1050, 1075, 1100,
1125, 1150, 1175, 1200, 1225, 1250, 1275, 1300,
1325, 1350, 1375, 1400, 1425, 1450, 1475, 1500,
static const unsigned int ldo5_voltage_map[] = {
0, 0, 0, 0, 0, 850000, 875000, 900000,
925000, 950000, 975000, 1000000, 1025000, 1050000, 1075000, 1100000,
1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000,
1325000, 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, 1500000,
};
static const int buck1_voltage_map[] = {
725, 750, 775, 800, 825, 850, 875, 900,
925, 950, 975, 1000, 1025, 1050, 1075, 1100,
1125, 1150, 1175, 1200, 1225, 1250, 1275, 1300,
1325, 1350, 1375, 1400, 1425, 1450, 1475, 1500,
static const unsigned int buck1_voltage_map[] = {
725000, 750000, 775000, 800000, 825000, 850000, 875000, 900000,
925000, 950000, 975000, 1000000, 1025000, 1050000, 1075000, 1100000,
1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000,
1325000, 1350000, 1375000, 1400000, 1425000, 1450000, 1475000, 1500000,
};
static const int buck23_voltage_map[] = {
0, 800, 850, 900, 950, 1000, 1050, 1100,
1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500,
1550, 1600, 1650, 1700, 1800, 1900, 2500, 2800,
3000, 3300,
};
static const int *ldo_voltage_map[] = {
ldo1_voltage_map,
ldo23_voltage_map,
ldo23_voltage_map,
ldo4_voltage_map,
ldo5_voltage_map,
};
static const int *buck_voltage_map[] = {
buck1_voltage_map,
buck23_voltage_map,
buck23_voltage_map,
static const unsigned int buck23_voltage_map[] = {
0, 800000, 850000, 900000, 950000, 1000000, 1050000, 1100000,
1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000,
1550000, 1600000, 1650000, 1700000, 1800000, 1900000, 2500000, 2800000,
3000000, 3300000,
};
static const int ldo_output_enable_mask[] = {
......@@ -160,7 +146,6 @@ static const int buck_base_addr[] = {
LP3972_B3TV_REG,
};
#define LP3972_LDO_VOL_VALUE_MAP(x) (ldo_voltage_map[x])
#define LP3972_LDO_OUTPUT_ENABLE_MASK(x) (ldo_output_enable_mask[x])
#define LP3972_LDO_OUTPUT_ENABLE_REG(x) (ldo_output_enable_addr[x])
......@@ -177,7 +162,6 @@ static const int buck_base_addr[] = {
#define LP3972_LDO_VOL_MIN_IDX(x) (((x) == 4) ? 0x05 : 0x00)
#define LP3972_LDO_VOL_MAX_IDX(x) ((x) ? (((x) == 4) ? 0x1f : 0x0f) : 0x0c)
#define LP3972_BUCK_VOL_VALUE_MAP(x) (buck_voltage_map[x])
#define LP3972_BUCK_VOL_ENABLE_REG(x) (buck_vol_enable_addr[x])
#define LP3972_BUCK_VOL1_REG(x) (buck_base_addr[x])
#define LP3972_BUCK_VOL_MASK 0x1f
......@@ -242,17 +226,6 @@ static int lp3972_set_bits(struct lp3972 *lp3972, u8 reg, u16 mask, u16 val)
return ret;
}
static int lp3972_ldo_list_voltage(struct regulator_dev *dev, unsigned index)
{
int ldo = rdev_get_id(dev) - LP3972_LDO1;
if (index < LP3972_LDO_VOL_MIN_IDX(ldo) ||
index > LP3972_LDO_VOL_MAX_IDX(ldo))
return -EINVAL;
return 1000 * LP3972_LDO_VOL_VALUE_MAP(ldo)[index];
}
static int lp3972_ldo_is_enabled(struct regulator_dev *dev)
{
struct lp3972 *lp3972 = rdev_get_drvdata(dev);
......@@ -294,7 +267,7 @@ static int lp3972_ldo_get_voltage(struct regulator_dev *dev)
reg = lp3972_reg_read(lp3972, LP3972_LDO_VOL_CONTR_REG(ldo));
val = (reg >> LP3972_LDO_VOL_CONTR_SHIFT(ldo)) & mask;
return 1000 * LP3972_LDO_VOL_VALUE_MAP(ldo)[val];
return dev->desc->volt_table[val];
}
static int lp3972_ldo_set_voltage_sel(struct regulator_dev *dev,
......@@ -337,7 +310,7 @@ static int lp3972_ldo_set_voltage_sel(struct regulator_dev *dev,
}
static struct regulator_ops lp3972_ldo_ops = {
.list_voltage = lp3972_ldo_list_voltage,
.list_voltage = regulator_list_voltage_table,
.is_enabled = lp3972_ldo_is_enabled,
.enable = lp3972_ldo_enable,
.disable = lp3972_ldo_disable,
......@@ -345,17 +318,6 @@ static struct regulator_ops lp3972_ldo_ops = {
.set_voltage_sel = lp3972_ldo_set_voltage_sel,
};
static int lp3972_dcdc_list_voltage(struct regulator_dev *dev, unsigned index)
{
int buck = rdev_get_id(dev) - LP3972_DCDC1;
if (index < LP3972_BUCK_VOL_MIN_IDX(buck) ||
index > LP3972_BUCK_VOL_MAX_IDX(buck))
return -EINVAL;
return 1000 * buck_voltage_map[buck][index];
}
static int lp3972_dcdc_is_enabled(struct regulator_dev *dev)
{
struct lp3972 *lp3972 = rdev_get_drvdata(dev);
......@@ -401,7 +363,7 @@ static int lp3972_dcdc_get_voltage(struct regulator_dev *dev)
reg = lp3972_reg_read(lp3972, LP3972_BUCK_VOL1_REG(buck));
reg &= LP3972_BUCK_VOL_MASK;
if (reg <= LP3972_BUCK_VOL_MAX_IDX(buck))
val = 1000 * buck_voltage_map[buck][reg];
val = dev->desc->volt_table[reg];
else {
val = 0;
dev_warn(&dev->dev, "chip reported incorrect voltage value."
......@@ -436,7 +398,7 @@ static int lp3972_dcdc_set_voltage_sel(struct regulator_dev *dev,
}
static struct regulator_ops lp3972_dcdc_ops = {
.list_voltage = lp3972_dcdc_list_voltage,
.list_voltage = regulator_list_voltage_table,
.is_enabled = lp3972_dcdc_is_enabled,
.enable = lp3972_dcdc_enable,
.disable = lp3972_dcdc_disable,
......@@ -450,6 +412,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3972_LDO1,
.ops = &lp3972_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo1_voltage_map),
.volt_table = ldo1_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
......@@ -458,6 +421,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3972_LDO2,
.ops = &lp3972_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo23_voltage_map),
.volt_table = ldo23_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
......@@ -466,6 +430,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3972_LDO3,
.ops = &lp3972_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo23_voltage_map),
.volt_table = ldo23_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
......@@ -474,6 +439,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3972_LDO4,
.ops = &lp3972_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo4_voltage_map),
.volt_table = ldo4_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
......@@ -482,6 +448,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3972_LDO5,
.ops = &lp3972_ldo_ops,
.n_voltages = ARRAY_SIZE(ldo5_voltage_map),
.volt_table = ldo5_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
......@@ -490,6 +457,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3972_DCDC1,
.ops = &lp3972_dcdc_ops,
.n_voltages = ARRAY_SIZE(buck1_voltage_map),
.volt_table = buck1_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
......@@ -498,6 +466,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3972_DCDC2,
.ops = &lp3972_dcdc_ops,
.n_voltages = ARRAY_SIZE(buck23_voltage_map),
.volt_table = buck23_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
......@@ -506,6 +475,7 @@ static const struct regulator_desc regulators[] = {
.id = LP3972_DCDC3,
.ops = &lp3972_dcdc_ops,
.n_voltages = ARRAY_SIZE(buck23_voltage_map),
.volt_table = buck23_voltage_map,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
},
......
drivers/regulator/lp872x.c 0 → 100644
浏览文件 @ 4d460fd3
此差异已折叠。
drivers/regulator/lp8788-buck.c 0 → 100644
浏览文件 @ 4d460fd3
此差异已折叠。
drivers/regulator/lp8788-ldo.c 0 → 100644
浏览文件 @ 4d460fd3
此差异已折叠。
drivers/regulator/max1586.c
浏览文件 @ 4d460fd3
......@@ -47,6 +47,14 @@ struct max1586_data {
struct regulator_dev *rdev[0];
};
/*
* V6 voltage
* On I2C bus, sending a "x" byte to the max1586 means :
* set V6 to either 0V, 1.8V, 2.5V, 3V depending on (x & 0x3)
* As regulator framework doesn't accept voltages to be 0V, we use 1uV.
*/
static int v6_voltages_uv[] = { 1, 1800000, 2500000, 3000000 };
/*
* V3 voltage
* On I2C bus, sending a "x" byte to the max1586 means :
......@@ -55,113 +63,49 @@ struct max1586_data {
* R24 and R25=100kOhm as described in the data sheet.
* The gain is approximately: 1 + R24/R25 + R24/185.5kOhm
*/
static int max1586_v3_calc_voltage(struct max1586_data *max1586,
unsigned selector)
{
unsigned range_uV = max1586->max_uV - max1586->min_uV;
return max1586->min_uV + (selector * range_uV / MAX1586_V3_MAX_VSEL);
}
static int max1586_v3_set(struct regulator_dev *rdev, int min_uV, int max_uV,
unsigned *selector)
static int max1586_v3_set_voltage_sel(struct regulator_dev *rdev,
unsigned selector)
{
struct max1586_data *max1586 = rdev_get_drvdata(rdev);
struct i2c_client *client = max1586->client;
unsigned range_uV = max1586->max_uV - max1586->min_uV;
u8 v3_prog;
if (min_uV > max1586->max_uV || max_uV < max1586->min_uV)
return -EINVAL;
if (min_uV < max1586->min_uV)
min_uV = max1586->min_uV;
*selector = DIV_ROUND_UP((min_uV - max1586->min_uV) *
MAX1586_V3_MAX_VSEL, range_uV);
if (max1586_v3_calc_voltage(max1586, *selector) > max_uV)
return -EINVAL;
dev_dbg(&client->dev, "changing voltage v3 to %dmv\n",
max1586_v3_calc_voltage(max1586, *selector) / 1000);
regulator_list_voltage_linear(rdev, selector) / 1000);
v3_prog = I2C_V3_SELECT | (u8) *selector;
v3_prog = I2C_V3_SELECT | (u8) selector;
return i2c_smbus_write_byte(client, v3_prog);
}
static int max1586_v3_list(struct regulator_dev *rdev, unsigned selector)
{
struct max1586_data *max1586 = rdev_get_drvdata(rdev);
if (selector > MAX1586_V3_MAX_VSEL)
return -EINVAL;
return max1586_v3_calc_voltage(max1586, selector);
}
/*
* V6 voltage
* On I2C bus, sending a "x" byte to the max1586 means :
* set V6 to either 0V, 1.8V, 2.5V, 3V depending on (x & 0x3)
* As regulator framework doesn't accept voltages to be 0V, we use 1uV.
*/
static int max1586_v6_calc_voltage(unsigned selector)
{
static int voltages_uv[] = { 1, 1800000, 2500000, 3000000 };
return voltages_uv[selector];
}
static int max1586_v6_set(struct regulator_dev *rdev, int min_uV, int max_uV,
unsigned int *selector)
static int max1586_v6_set_voltage_sel(struct regulator_dev *rdev,
unsigned int selector)
{
struct i2c_client *client = rdev_get_drvdata(rdev);
u8 v6_prog;
if (min_uV < MAX1586_V6_MIN_UV || min_uV > MAX1586_V6_MAX_UV)
return -EINVAL;
if (max_uV < MAX1586_V6_MIN_UV || max_uV > MAX1586_V6_MAX_UV)
return -EINVAL;
if (min_uV < 1800000)
*selector = 0;
else if (min_uV < 2500000)
*selector = 1;
else if (min_uV < 3000000)
*selector = 2;
else if (min_uV >= 3000000)
*selector = 3;
if (max1586_v6_calc_voltage(*selector) > max_uV)
return -EINVAL;
dev_dbg(&client->dev, "changing voltage v6 to %dmv\n",
max1586_v6_calc_voltage(*selector) / 1000);
rdev->desc->volt_table[selector] / 1000);
v6_prog = I2C_V6_SELECT | (u8) *selector;
v6_prog = I2C_V6_SELECT | (u8) selector;
return i2c_smbus_write_byte(client, v6_prog);
}
static int max1586_v6_list(struct regulator_dev *rdev, unsigned selector)
{
if (selector > MAX1586_V6_MAX_VSEL)
return -EINVAL;
return max1586_v6_calc_voltage(selector);
}
/*
* The Maxim 1586 controls V3 and V6 voltages, but offers no way of reading back
* the set up value.
*/
static struct regulator_ops max1586_v3_ops = {
.set_voltage = max1586_v3_set,
.list_voltage = max1586_v3_list,
.set_voltage_sel = max1586_v3_set_voltage_sel,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
};
static struct regulator_ops max1586_v6_ops = {
.set_voltage = max1586_v6_set,
.list_voltage = max1586_v6_list,
.set_voltage_sel = max1586_v6_set_voltage_sel,
.list_voltage = regulator_list_voltage_table,
};
static const struct regulator_desc max1586_reg[] = {
static struct regulator_desc max1586_reg[] = {
{
.name = "Output_V3",
.id = MAX1586_V3,
......@@ -176,6 +120,7 @@ static const struct regulator_desc max1586_reg[] = {
.ops = &max1586_v6_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = MAX1586_V6_MAX_VSEL + 1,
.volt_table = v6_voltages_uv,
.owner = THIS_MODULE,
},
};
......@@ -213,6 +158,13 @@ static int __devinit max1586_pmic_probe(struct i2c_client *client,
goto err;
}
if (id == MAX1586_V3) {
max1586_reg[id].min_uV = max1586->min_uV;
max1586_reg[id].uV_step =
(max1586->max_uV - max1586->min_uV) /
MAX1586_V3_MAX_VSEL;
}
config.dev = &client->dev;
config.init_data = pdata->subdevs[i].platform_data;
config.driver_data = max1586;
......
drivers/regulator/max77686.c 0 → 100644
浏览文件 @ 4d460fd3
/*
* max77686.c - Regulator driver for the Maxim 77686
*
* Copyright (C) 2012 Samsung Electronics
* Chiwoong Byun <woong.byun@smasung.com>
* Jonghwa Lee <jonghwa3.lee@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* This driver is based on max8997.c
*/
#include <linux/kernel.h>
#include <linux/bug.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/mfd/max77686.h>
#include <linux/mfd/max77686-private.h>
#define MAX77686_LDO_MINUV 800000
#define MAX77686_LDO_UVSTEP 50000
#define MAX77686_LDO_LOW_MINUV 800000
#define MAX77686_LDO_LOW_UVSTEP 25000
#define MAX77686_BUCK_MINUV 750000
#define MAX77686_BUCK_UVSTEP 50000
#define MAX77686_RAMP_DELAY 100000 /* uV/us */
#define MAX77686_DVS_RAMP_DELAY 27500 /* uV/us */
#define MAX77686_DVS_MINUV 600000
#define MAX77686_DVS_UVSTEP 12500
#define MAX77686_OPMODE_SHIFT 6
#define MAX77686_OPMODE_BUCK234_SHIFT 4
#define MAX77686_OPMODE_MASK 0x3
#define MAX77686_VSEL_MASK 0x3F
#define MAX77686_DVS_VSEL_MASK 0xFF
#define MAX77686_RAMP_RATE_MASK 0xC0
#define MAX77686_REGULATORS MAX77686_REG_MAX
#define MAX77686_LDOS 26
enum max77686_ramp_rate {
RAMP_RATE_13P75MV,
RAMP_RATE_27P5MV,
RAMP_RATE_55MV,
RAMP_RATE_NO_CTRL, /* 100mV/us */
};
struct max77686_data {
struct regulator_dev **rdev;
};
static int max77686_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
{
unsigned int ramp_value = RAMP_RATE_NO_CTRL;
switch (ramp_delay) {
case 1 ... 13750:
ramp_value = RAMP_RATE_13P75MV;
break;
case 13751 ... 27500:
ramp_value = RAMP_RATE_27P5MV;
break;
case 27501 ... 55000:
ramp_value = RAMP_RATE_55MV;
break;
case 55001 ... 100000:
break;
default:
pr_warn("%s: ramp_delay: %d not supported, setting 100000\n",
rdev->desc->name, ramp_delay);
}
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
MAX77686_RAMP_RATE_MASK, ramp_value << 6);
}
static struct regulator_ops max77686_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
};
static struct regulator_ops max77686_buck_dvs_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = max77686_set_ramp_delay,
};
#define regulator_desc_ldo(num) { \
.name = "LDO"#num, \
.id = MAX77686_LDO##num, \
.ops = &max77686_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = MAX77686_LDO_MINUV, \
.uV_step = MAX77686_LDO_UVSTEP, \
.ramp_delay = MAX77686_RAMP_DELAY, \
.n_voltages = MAX77686_VSEL_MASK + 1, \
.vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
.vsel_mask = MAX77686_VSEL_MASK, \
.enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
.enable_mask = MAX77686_OPMODE_MASK \
<< MAX77686_OPMODE_SHIFT, \
}
#define regulator_desc_ldo_low(num) { \
.name = "LDO"#num, \
.id = MAX77686_LDO##num, \
.ops = &max77686_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = MAX77686_LDO_LOW_MINUV, \
.uV_step = MAX77686_LDO_LOW_UVSTEP, \
.ramp_delay = MAX77686_RAMP_DELAY, \
.n_voltages = MAX77686_VSEL_MASK + 1, \
.vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
.vsel_mask = MAX77686_VSEL_MASK, \
.enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
.enable_mask = MAX77686_OPMODE_MASK \
<< MAX77686_OPMODE_SHIFT, \
}
#define regulator_desc_buck(num) { \
.name = "BUCK"#num, \
.id = MAX77686_BUCK##num, \
.ops = &max77686_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = MAX77686_BUCK_MINUV, \
.uV_step = MAX77686_BUCK_UVSTEP, \
.ramp_delay = MAX77686_RAMP_DELAY, \
.n_voltages = MAX77686_VSEL_MASK + 1, \
.vsel_reg = MAX77686_REG_BUCK5OUT + (num - 5) * 2, \
.vsel_mask = MAX77686_VSEL_MASK, \
.enable_reg = MAX77686_REG_BUCK5CTRL + (num - 5) * 2, \
.enable_mask = MAX77686_OPMODE_MASK, \
}
#define regulator_desc_buck1(num) { \
.name = "BUCK"#num, \
.id = MAX77686_BUCK##num, \
.ops = &max77686_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = MAX77686_BUCK_MINUV, \
.uV_step = MAX77686_BUCK_UVSTEP, \
.ramp_delay = MAX77686_RAMP_DELAY, \
.n_voltages = MAX77686_VSEL_MASK + 1, \
.vsel_reg = MAX77686_REG_BUCK1OUT, \
.vsel_mask = MAX77686_VSEL_MASK, \
.enable_reg = MAX77686_REG_BUCK1CTRL, \
.enable_mask = MAX77686_OPMODE_MASK, \
}
#define regulator_desc_buck_dvs(num) { \
.name = "BUCK"#num, \
.id = MAX77686_BUCK##num, \
.ops = &max77686_buck_dvs_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = MAX77686_DVS_MINUV, \
.uV_step = MAX77686_DVS_UVSTEP, \
.ramp_delay = MAX77686_DVS_RAMP_DELAY, \
.n_voltages = MAX77686_DVS_VSEL_MASK + 1, \
.vsel_reg = MAX77686_REG_BUCK2DVS1 + (num - 2) * 10, \
.vsel_mask = MAX77686_DVS_VSEL_MASK, \
.enable_reg = MAX77686_REG_BUCK2CTRL1 + (num - 2) * 10, \
.enable_mask = MAX77686_OPMODE_MASK \
<< MAX77686_OPMODE_BUCK234_SHIFT, \
}
static struct regulator_desc regulators[] = {
regulator_desc_ldo_low(1),
regulator_desc_ldo_low(2),
regulator_desc_ldo(3),
regulator_desc_ldo(4),
regulator_desc_ldo(5),
regulator_desc_ldo_low(6),
regulator_desc_ldo_low(7),
regulator_desc_ldo_low(8),
regulator_desc_ldo(9),
regulator_desc_ldo(10),
regulator_desc_ldo(11),
regulator_desc_ldo(12),
regulator_desc_ldo(13),
regulator_desc_ldo(14),
regulator_desc_ldo_low(15),
regulator_desc_ldo(16),
regulator_desc_ldo(17),
regulator_desc_ldo(18),
regulator_desc_ldo(19),
regulator_desc_ldo(20),
regulator_desc_ldo(21),
regulator_desc_ldo(22),
regulator_desc_ldo(23),
regulator_desc_ldo(24),
regulator_desc_ldo(25),
regulator_desc_ldo(26),
regulator_desc_buck1(1),
regulator_desc_buck_dvs(2),
regulator_desc_buck_dvs(3),
regulator_desc_buck_dvs(4),
regulator_desc_buck(5),
regulator_desc_buck(6),
regulator_desc_buck(7),
regulator_desc_buck(8),
regulator_desc_buck(9),
};
#ifdef CONFIG_OF
static int max77686_pmic_dt_parse_pdata(struct max77686_dev *iodev,
struct max77686_platform_data *pdata)
{
struct device_node *pmic_np, *regulators_np;
struct max77686_regulator_data *rdata;
struct of_regulator_match rmatch;
unsigned int i;
pmic_np = iodev->dev->of_node;
regulators_np = of_find_node_by_name(pmic_np, "voltage-regulators");
if (!regulators_np) {
dev_err(iodev->dev, "could not find regulators sub-node\n");
return -EINVAL;
}
pdata->num_regulators = ARRAY_SIZE(regulators);
rdata = devm_kzalloc(iodev->dev, sizeof(*rdata) *
pdata->num_regulators, GFP_KERNEL);
if (!rdata) {
dev_err(iodev->dev,
"could not allocate memory for regulator data\n");
return -ENOMEM;
}
for (i = 0; i < pdata->num_regulators; i++) {
rmatch.name = regulators[i].name;
rmatch.init_data = NULL;
rmatch.of_node = NULL;
of_regulator_match(iodev->dev, regulators_np, &rmatch, 1);
rdata[i].initdata = rmatch.init_data;
}
pdata->regulators = rdata;
return 0;
}
#else
static int max77686_pmic_dt_parse_pdata(struct max77686_dev *iodev,
struct max77686_platform_data *pdata)
{
return 0;
}
#endif /* CONFIG_OF */
static __devinit int max77686_pmic_probe(struct platform_device *pdev)
{
struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct max77686_platform_data *pdata = dev_get_platdata(iodev->dev);
struct regulator_dev **rdev;
struct max77686_data *max77686;
int i, size;
int ret = 0;
struct regulator_config config = { };
dev_dbg(&pdev->dev, "%s\n", __func__);
if (!pdata) {
dev_err(&pdev->dev, "no platform data found for regulator\n");
return -ENODEV;
}
if (iodev->dev->of_node) {
ret = max77686_pmic_dt_parse_pdata(iodev, pdata);
if (ret)
return ret;
}
if (pdata->num_regulators != MAX77686_REGULATORS) {
dev_err(&pdev->dev,
"Invalid initial data for regulator's initialiation\n");
return -EINVAL;
}
max77686 = devm_kzalloc(&pdev->dev, sizeof(struct max77686_data),
GFP_KERNEL);
if (!max77686)
return -ENOMEM;
size = sizeof(struct regulator_dev *) * MAX77686_REGULATORS;
max77686->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
if (!max77686->rdev)
return -ENOMEM;
rdev = max77686->rdev;
config.dev = &pdev->dev;
config.regmap = iodev->regmap;
platform_set_drvdata(pdev, max77686);
for (i = 0; i < MAX77686_REGULATORS; i++) {
config.init_data = pdata->regulators[i].initdata;
rdev[i] = regulator_register(&regulators[i], &config);
if (IS_ERR(rdev[i])) {
ret = PTR_ERR(rdev[i]);
dev_err(&pdev->dev,
"regulator init failed for %d\n", i);
rdev[i] = NULL;
goto err;
}
}
return 0;
err:
while (--i >= 0)
regulator_unregister(rdev[i]);
return ret;
}
static int __devexit max77686_pmic_remove(struct platform_device *pdev)
{
struct max77686_data *max77686 = platform_get_drvdata(pdev);
struct regulator_dev **rdev = max77686->rdev;
int i;
for (i = 0; i < MAX77686_REGULATORS; i++)
if (rdev[i])
regulator_unregister(rdev[i]);
return 0;
}
static const struct platform_device_id max77686_pmic_id[] = {
{"max77686-pmic", 0},
{ },
};
MODULE_DEVICE_TABLE(platform, max77686_pmic_id);
static struct platform_driver max77686_pmic_driver = {
.driver = {
.name = "max77686-pmic",
.owner = THIS_MODULE,
},
.probe = max77686_pmic_probe,
.remove = __devexit_p(max77686_pmic_remove),
.id_table = max77686_pmic_id,
};
static int __init max77686_pmic_init(void)
{
return platform_driver_register(&max77686_pmic_driver);
}
subsys_initcall(max77686_pmic_init);
static void __exit max77686_pmic_cleanup(void)
{
platform_driver_unregister(&max77686_pmic_driver);
}
module_exit(max77686_pmic_cleanup);
MODULE_DESCRIPTION("MAXIM 77686 Regulator Driver");
MODULE_AUTHOR("Chiwoong Byun <woong.byun@samsung.com>");
MODULE_LICENSE("GPL");
drivers/regulator/max8952.c
浏览文件 @ 4d460fd3
此差异已折叠。
drivers/regulator/max8997.c
浏览文件 @ 4d460fd3
此差异已折叠。
drivers/regulator/max8998.c
浏览文件 @ 4d460fd3
此差异已折叠。
drivers/regulator/mc13xxx.h
浏览文件 @ 4d460fd3
此差异已折叠。
drivers/regulator/of_regulator.c
浏览文件 @ 4d460fd3
此差异已折叠。
drivers/regulator/pcap-regulator.c
浏览文件 @ 4d460fd3
此差异已折叠。
drivers/regulator/s2mps11.c 0 → 100644
浏览文件 @ 4d460fd3
此差异已折叠。
drivers/regulator/s5m8767.c
浏览文件 @ 4d460fd3
此差异已折叠。
drivers/regulator/tps6105x-regulator.c
浏览文件 @ 4d460fd3
......@@ -20,7 +20,7 @@
#include <linux/mfd/core.h>
#include <linux/mfd/tps6105x.h>
static const int tps6105x_voltages[] = {
static const unsigned int tps6105x_voltages[] = {
4500000,
5000000,
5250000,
......@@ -105,22 +105,13 @@ static int tps6105x_regulator_set_voltage_sel(struct regulator_dev *rdev,
return 0;
}
static int tps6105x_regulator_list_voltage(struct regulator_dev *rdev,
unsigned selector)
{
if (selector >= ARRAY_SIZE(tps6105x_voltages))
return -EINVAL;
return tps6105x_voltages[selector];
}
static struct regulator_ops tps6105x_regulator_ops = {
.enable = tps6105x_regulator_enable,
.disable = tps6105x_regulator_disable,
.is_enabled = tps6105x_regulator_is_enabled,
.get_voltage_sel = tps6105x_regulator_get_voltage_sel,
.set_voltage_sel = tps6105x_regulator_set_voltage_sel,
.list_voltage = tps6105x_regulator_list_voltage,
.list_voltage = regulator_list_voltage_table,
};
static const struct regulator_desc tps6105x_regulator_desc = {
......@@ -130,6 +121,7 @@ static const struct regulator_desc tps6105x_regulator_desc = {
.id = 0,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(tps6105x_voltages),
.volt_table = tps6105x_voltages,
};
/*
......
drivers/regulator/twl-regulator.c
浏览文件 @ 4d460fd3
此差异已折叠。
drivers/regulator/wm831x-dcdc.c
浏览文件 @ 4d460fd3
此差异已折叠。
drivers/regulator/wm831x-ldo.c
浏览文件 @ 4d460fd3
此差异已折叠。
include/linux/mfd/tps65217.h
浏览文件 @ 4d460fd3
此差异已折叠。
include/linux/mfd/tps65910.h
浏览文件 @ 4d460fd3
......@@ -880,4 +880,10 @@ static inline int tps65910_reg_clear_bits(struct tps65910 *tps65910, u8 reg,
return regmap_update_bits(tps65910->regmap, reg, mask, 0);
}
static inline int tps65910_reg_update_bits(struct tps65910 *tps65910, u8 reg,
u8 mask, u8 val)
{
return regmap_update_bits(tps65910->regmap, reg, mask, val);
}
#endif /* __LINUX_MFD_TPS65910_H */
include/linux/regulator/consumer.h
浏览文件 @ 4d460fd3
此差异已折叠。
include/linux/regulator/driver.h
浏览文件 @ 4d460fd3
此差异已折叠。
include/linux/regulator/fixed.h
浏览文件 @ 4d460fd3
此差异已折叠。
include/linux/regulator/lp872x.h 0 → 100644
浏览文件 @ 4d460fd3
此差异已折叠。
include/linux/regulator/machine.h
浏览文件 @ 4d460fd3
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或