Skip to content

C
clone-Linux

gsplhtlxg / clone-Linux

通知 2
Star 0
Fork 1
C
clone-Linux

体验新版 GitCode，发现更多精彩内容 >>

提交 4d191868 编写于 作者: R Richard Zhao 提交者： Shawn Guo
浏览文件
操作

dts/imx: rename gpio labels to consistent with hw spec 

GPIO1/GPIO2/... is more readable than GPIO0/GPIO1/... .
Remove redundant gpio comments.
Signed-off-by: NRichard Zhao <richard.zhao@linaro.org>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
上级 dc47ce90
隐藏空白更改
内联 并排
Showing with 55 addition and 58 deletion
arch/arm/boot/dts/imx51-babbage.dts
浏览文件 @ 4d191868
......@@ -35,8 +35,8 @@ esdhc@70004000 { /* ESDHC1 */
};
esdhc@70008000 { /* ESDHC2 */
cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */
wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */
cd-gpios = <&gpio1 6 0>;
wp-gpios = <&gpio1 5 0>;
status = "okay";
};
......@@ -47,8 +47,7 @@ uart2: uart@7000c000 { /* UART3 */
ecspi@70010000 { /* ECSPI1 */
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */
<&gpio3 25 0>; /* GPIO4_25 */
cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
status = "okay";
pmic: mc13892@0 {
......@@ -57,7 +56,7 @@ pmic: mc13892@0 {
compatible = "fsl,mc13892";
spi-max-frequency = <6000000>;
reg = <0>;
mc13xxx-irq-gpios = <&gpio0 8 0>; /* GPIO1_8 */
mc13xxx-irq-gpios = <&gpio1 8 0>;
fsl,mc13xxx-uses-regulator;
};
......@@ -127,7 +126,7 @@ gpio-keys {
power {
label = "Power Button";
gpios = <&gpio1 21 0>;
gpios = <&gpio2 21 0>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
......
arch/arm/boot/dts/imx51.dtsi
浏览文件 @ 4d191868
......@@ -117,7 +117,7 @@ esdhc@70024000 { /* ESDHC4 */
};
};
gpio0: gpio@73f84000 { /* GPIO1 */
gpio1: gpio@73f84000 {
compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
reg = <0x73f84000 0x4000>;
interrupts = <50 51>;
......@@ -127,7 +127,7 @@ gpio0: gpio@73f84000 { /* GPIO1 */
#interrupt-cells = <1>;
};
gpio1: gpio@73f88000 { /* GPIO2 */
gpio2: gpio@73f88000 {
compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
reg = <0x73f88000 0x4000>;
interrupts = <52 53>;
......@@ -137,7 +137,7 @@ gpio1: gpio@73f88000 { /* GPIO2 */
#interrupt-cells = <1>;
};
gpio2: gpio@73f8c000 { /* GPIO3 */
gpio3: gpio@73f8c000 {
compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
reg = <0x73f8c000 0x4000>;
interrupts = <54 55>;
......@@ -147,7 +147,7 @@ gpio2: gpio@73f8c000 { /* GPIO3 */
#interrupt-cells = <1>;
};
gpio3: gpio@73f90000 { /* GPIO4 */
gpio4: gpio@73f90000 {
compatible = "fsl,imx51-gpio", "fsl,imx31-gpio";
reg = <0x73f90000 0x4000>;
interrupts = <56 57>;
......
arch/arm/boot/dts/imx53-ard.dts
浏览文件 @ 4d191868
......@@ -29,8 +29,8 @@ soc {
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
cd-gpios = <&gpio0 1 0>; /* GPIO1_1 */
wp-gpios = <&gpio0 9 0>; /* GPIO1_9 */
cd-gpios = <&gpio1 1 0>;
wp-gpios = <&gpio1 9 0>;
status = "okay";
};
};
......@@ -67,7 +67,7 @@ lan9220@f4000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0xf4000000 0x2000000>;
phy-mode = "mii";
interrupt-parent = <&gpio1>;
interrupt-parent = <&gpio2>;
interrupts = <31>;
reg-io-width = <4>;
smsc,irq-push-pull;
......@@ -79,34 +79,34 @@ gpio-keys {
home {
label = "Home";
gpios = <&gpio4 10 0>; /* GPIO5_10 */
gpios = <&gpio5 10 0>;
linux,code = <102>; /* KEY_HOME */
gpio-key,wakeup;
};
back {
label = "Back";
gpios = <&gpio4 11 0>; /* GPIO5_11 */
gpios = <&gpio5 11 0>;
linux,code = <158>; /* KEY_BACK */
gpio-key,wakeup;
};
program {
label = "Program";
gpios = <&gpio4 12 0>; /* GPIO5_12 */
gpios = <&gpio5 12 0>;
linux,code = <362>; /* KEY_PROGRAM */
gpio-key,wakeup;
};
volume-up {
label = "Volume Up";
gpios = <&gpio4 13 0>; /* GPIO5_13 */
gpios = <&gpio5 13 0>;
linux,code = <115>; /* KEY_VOLUMEUP */
};
volume-down {
label = "Volume Down";
gpios = <&gpio3 0 0>; /* GPIO4_0 */
gpios = <&gpio4 0 0>;
linux,code = <114>; /* KEY_VOLUMEDOWN */
};
};
......
arch/arm/boot/dts/imx53-evk.dts
浏览文件 @ 4d191868
......@@ -29,15 +29,14 @@ soc {
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
wp-gpios = <&gpio2 14 0>; /* GPIO3_14 */
cd-gpios = <&gpio3 13 0>;
wp-gpios = <&gpio3 14 0>;
status = "okay";
};
ecspi@50010000 { /* ECSPI1 */
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio1 30 0>, /* GPIO2_30 */
<&gpio2 19 0>; /* GPIO3_19 */
cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
status = "okay";
flash: at45db321d@1 {
......@@ -61,8 +60,8 @@ partition@40000 {
};
esdhc@50020000 { /* ESDHC3 */
cd-gpios = <&gpio2 11 0>; /* GPIO3_11 */
wp-gpios = <&gpio2 12 0>; /* GPIO3_12 */
cd-gpios = <&gpio3 11 0>;
wp-gpios = <&gpio3 12 0>;
status = "okay";
};
};
......@@ -102,7 +101,7 @@ codec: sgtl5000@0a {
fec@63fec000 {
phy-mode = "rmii";
phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
};
};
......@@ -113,7 +112,7 @@ leds {
green {
label = "Heartbeat";
gpios = <&gpio6 7 0>; /* GPIO7_7 */
gpios = <&gpio7 7 0>;
linux,default-trigger = "heartbeat";
};
};
......
arch/arm/boot/dts/imx53-qsb.dts
浏览文件 @ 4d191868
......@@ -29,13 +29,13 @@ soc {
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
cd-gpios = <&gpio3 13 0>;
status = "okay";
};
esdhc@50020000 { /* ESDHC3 */
cd-gpios = <&gpio2 11 0>; /* GPIO3_11 */
wp-gpios = <&gpio2 12 0>; /* GPIO3_12 */
cd-gpios = <&gpio3 11 0>;
wp-gpios = <&gpio3 12 0>;
status = "okay";
};
};
......@@ -84,7 +84,7 @@ pmic: dialog@48 {
fec@63fec000 {
phy-mode = "rmii";
phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
};
};
......@@ -95,20 +95,20 @@ gpio-keys {
power {
label = "Power Button";
gpios = <&gpio0 8 0>; /* GPIO1_8 */
gpios = <&gpio1 8 0>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
volume-up {
label = "Volume Up";
gpios = <&gpio1 14 0>; /* GPIO2_14 */
gpios = <&gpio2 14 0>;
linux,code = <115>; /* KEY_VOLUMEUP */
};
volume-down {
label = "Volume Down";
gpios = <&gpio1 15 0>; /* GPIO2_15 */
gpios = <&gpio2 15 0>;
linux,code = <114>; /* KEY_VOLUMEDOWN */
};
};
......@@ -118,7 +118,7 @@ leds {
user {
label = "Heartbeat";
gpios = <&gpio6 7 0>; /* GPIO7_7 */
gpios = <&gpio7 7 0>;
linux,default-trigger = "heartbeat";
};
};
......
arch/arm/boot/dts/imx53-smd.dts
浏览文件 @ 4d191868
......@@ -29,8 +29,8 @@ soc {
aips@50000000 { /* AIPS1 */
spba@50000000 {
esdhc@50004000 { /* ESDHC1 */
cd-gpios = <&gpio2 13 0>; /* GPIO3_13 */
wp-gpios = <&gpio3 11 0>; /* GPIO4_11 */
cd-gpios = <&gpio3 13 0>;
wp-gpios = <&gpio4 11 0>;
status = "okay";
};
......@@ -46,8 +46,7 @@ uart2: uart@5000c000 { /* UART3 */
ecspi@50010000 { /* ECSPI1 */
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio1 30 0>, /* GPIO2_30 */
<&gpio2 19 0>; /* GPIO3_19 */
cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
status = "okay";
zigbee: mc1323@0 {
......@@ -145,7 +144,7 @@ pmic: dialog@48 {
fec@63fec000 {
phy-mode = "rmii";
phy-reset-gpios = <&gpio6 6 0>; /* GPIO7_6 */
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
};
};
......@@ -156,13 +155,13 @@ gpio-keys {
volume-up {
label = "Volume Up";
gpios = <&gpio1 14 0>; /* GPIO2_14 */
gpios = <&gpio2 14 0>;
linux,code = <115>; /* KEY_VOLUMEUP */
};
volume-down {
label = "Volume Down";
gpios = <&gpio1 15 0>; /* GPIO2_15 */
gpios = <&gpio2 15 0>;
linux,code = <114>; /* KEY_VOLUMEDOWN */
};
};
......
arch/arm/boot/dts/imx53.dtsi
浏览文件 @ 4d191868
......@@ -119,7 +119,7 @@ esdhc@50024000 { /* ESDHC4 */
};
};
gpio0: gpio@53f84000 { /* GPIO1 */
gpio1: gpio@53f84000 {
compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
reg = <0x53f84000 0x4000>;
interrupts = <50 51>;
......@@ -129,7 +129,7 @@ gpio0: gpio@53f84000 { /* GPIO1 */
#interrupt-cells = <1>;
};
gpio1: gpio@53f88000 { /* GPIO2 */
gpio2: gpio@53f88000 {
compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
reg = <0x53f88000 0x4000>;
interrupts = <52 53>;
......@@ -139,7 +139,7 @@ gpio1: gpio@53f88000 { /* GPIO2 */
#interrupt-cells = <1>;
};
gpio2: gpio@53f8c000 { /* GPIO3 */
gpio3: gpio@53f8c000 {
compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
reg = <0x53f8c000 0x4000>;
interrupts = <54 55>;
......@@ -149,7 +149,7 @@ gpio2: gpio@53f8c000 { /* GPIO3 */
#interrupt-cells = <1>;
};
gpio3: gpio@53f90000 { /* GPIO4 */
gpio4: gpio@53f90000 {
compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
reg = <0x53f90000 0x4000>;
interrupts = <56 57>;
......@@ -187,7 +187,7 @@ uart1: uart@53fc0000 { /* UART2 */
status = "disabled";
};
gpio4: gpio@53fdc000 { /* GPIO5 */
gpio5: gpio@53fdc000 {
compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
reg = <0x53fdc000 0x4000>;
interrupts = <103 104>;
......@@ -197,7 +197,7 @@ gpio4: gpio@53fdc000 { /* GPIO5 */
#interrupt-cells = <1>;
};
gpio5: gpio@53fe0000 { /* GPIO6 */
gpio6: gpio@53fe0000 {
compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
reg = <0x53fe0000 0x4000>;
interrupts = <105 106>;
......@@ -207,7 +207,7 @@ gpio5: gpio@53fe0000 { /* GPIO6 */
#interrupt-cells = <1>;
};
gpio6: gpio@53fe4000 { /* GPIO7 */
gpio7: gpio@53fe4000 {
compatible = "fsl,imx53-gpio", "fsl,imx31-gpio";
reg = <0x53fe4000 0x4000>;
interrupts = <107 108>;
......
arch/arm/boot/dts/imx6q-sabreauto.dts
浏览文件 @ 4d191868
......@@ -34,8 +34,8 @@ enet@02188000 {
};
usdhc@02198000 { /* uSDHC3 */
cd-gpios = <&gpio5 11 0>; /* GPIO6_11 */
wp-gpios = <&gpio5 14 0>; /* GPIO6_14 */
cd-gpios = <&gpio6 11 0>;
wp-gpios = <&gpio6 14 0>;
status = "okay";
};
......@@ -55,7 +55,7 @@ leds {
debug-led {
label = "Heartbeat";
gpios = <&gpio2 25 0>; /* GPIO3_25 */
gpios = <&gpio3 25 0>;
linux,default-trigger = "heartbeat";
};
};
......
arch/arm/boot/dts/imx6q.dtsi
浏览文件 @ 4d191868
......@@ -247,7 +247,7 @@ gpt@02098000 {
interrupts = <0 55 0x04>;
};
gpio0: gpio@0209c000 { /* GPIO1 */
gpio1: gpio@0209c000 {
compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
reg = <0x0209c000 0x4000>;
interrupts = <0 66 0x04 0 67 0x04>;
......@@ -257,7 +257,7 @@ gpio0: gpio@0209c000 { /* GPIO1 */
#interrupt-cells = <1>;
};
gpio1: gpio@020a0000 { /* GPIO2 */
gpio2: gpio@020a0000 {
compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
reg = <0x020a0000 0x4000>;
interrupts = <0 68 0x04 0 69 0x04>;
......@@ -267,7 +267,7 @@ gpio1: gpio@020a0000 { /* GPIO2 */
#interrupt-cells = <1>;
};
gpio2: gpio@020a4000 { /* GPIO3 */
gpio3: gpio@020a4000 {
compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
reg = <0x020a4000 0x4000>;
interrupts = <0 70 0x04 0 71 0x04>;
......@@ -277,7 +277,7 @@ gpio2: gpio@020a4000 { /* GPIO3 */
#interrupt-cells = <1>;
};
gpio3: gpio@020a8000 { /* GPIO4 */
gpio4: gpio@020a8000 {
compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
reg = <0x020a8000 0x4000>;
interrupts = <0 72 0x04 0 73 0x04>;
......@@ -287,7 +287,7 @@ gpio3: gpio@020a8000 { /* GPIO4 */
#interrupt-cells = <1>;
};
gpio4: gpio@020ac000 { /* GPIO5 */
gpio5: gpio@020ac000 {
compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
reg = <0x020ac000 0x4000>;
interrupts = <0 74 0x04 0 75 0x04>;
......@@ -297,7 +297,7 @@ gpio4: gpio@020ac000 { /* GPIO5 */
#interrupt-cells = <1>;
};
gpio5: gpio@020b0000 { /* GPIO6 */
gpio6: gpio@020b0000 {
compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
reg = <0x020b0000 0x4000>;
interrupts = <0 76 0x04 0 77 0x04>;
......@@ -307,7 +307,7 @@ gpio5: gpio@020b0000 { /* GPIO6 */
#interrupt-cells = <1>;
};
gpio6: gpio@020b4000 { /* GPIO7 */
gpio7: gpio@020b4000 {
compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
reg = <0x020b4000 0x4000>;
interrupts = <0 78 0x04 0 79 0x04>;
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或