提交 497f050c 编写于 作者: A Alexey Dobriyan 提交者: Jeff Garzik

atl1: add netconsole support

Copied from b44 driver, but it works:

netconsole: device eth0 not up yet, forcing it
atl1: eth0 link is up 100 Mbps full duplex
netconsole: network logging started
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
上级 5bebf82f
......@@ -2038,6 +2038,15 @@ static int atl1_close(struct net_device *netdev)
return 0;
}
#ifdef CONFIG_NET_POLL_CONTROLLER
static void atl1_poll_controller(struct net_device *netdev)
{
disable_irq(netdev->irq);
atl1_intr(netdev->irq, netdev);
enable_irq(netdev->irq);
}
#endif
/*
* If TPD Buffer size equal to 0, PCIE DMAR_TO_INT
* will assert. We do soft reset <0x1400=1> according
......@@ -2190,6 +2199,9 @@ static int __devinit atl1_probe(struct pci_dev *pdev,
netdev->do_ioctl = &atl1_ioctl;
netdev->tx_timeout = &atl1_tx_timeout;
netdev->watchdog_timeo = 5 * HZ;
#ifdef CONFIG_NET_POLL_CONTROLLER
netdev->poll_controller = atl1_poll_controller;
#endif
netdev->vlan_rx_register = atl1_vlan_rx_register;
netdev->vlan_rx_add_vid = atl1_vlan_rx_add_vid;
netdev->vlan_rx_kill_vid = atl1_vlan_rx_kill_vid;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册