提交 48fc7f7e 编写于 作者: A Adam Buchbinder 提交者: Jiri Kosina

Fix misspellings of "whether" in comments.

"Whether" is misspelled in various comments across the tree; this
fixes them. No code changes.
Signed-off-by: NAdam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
上级 53f698cd
......@@ -74,7 +74,7 @@
/* 0xE0000000 contains the IO space that is split by speed and
* wether the access is for 8 or 16bit IO... this ensures that
* whether the access is for 8 or 16bit IO... this ensures that
* the correct access is made
*
* 0x10000000 of space, partitioned as so:
......
......@@ -88,7 +88,7 @@ enum s3c2410_dma_state {
*
* This represents the state of the DMA engine, wrt to the loaded / running
* transfers. Since we don't have any way of knowing exactly the state of
* the DMA transfers, we need to know the state to make decisions on wether
* the DMA transfers, we need to know the state to make decisions on whether
* we can
*
* S3C2410_DMA_NONE
......
......@@ -51,7 +51,7 @@
#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000)
/* 0xE0000000 contains the IO space that is split by speed and
* wether the access is for 8 or 16bit IO... this ensures that
* whether the access is for 8 or 16bit IO... this ensures that
* the correct access is made
*
* 0x10000000 of space, partitioned as so:
......
......@@ -121,7 +121,7 @@ void s3c_pm_configure_extint(void)
int pin;
/* for each of the external interrupts (EINT0..EINT15) we
* need to check wether it is an external interrupt source,
* need to check whether it is an external interrupt source,
* and then configure it as an input if it is not
*/
......
......@@ -325,7 +325,7 @@ static int s3c2410_dma_start(struct s3c2410_dma_chan *chan)
chan->state = S3C2410_DMA_RUNNING;
/* check wether there is anything to load, and if not, see
/* check whether there is anything to load, and if not, see
* if we can find anything to load
*/
......
......@@ -50,7 +50,7 @@ fp_fsqrt(struct fp_ext *dest, struct fp_ext *src)
* sqrt(m*2^e) =
* sqrt(2*m) * 2^(p) , if e = 2*p + 1
*
* So we use the last bit of the exponent to decide wether to
* So we use the last bit of the exponent to decide whether to
* use the m or 2*m.
*
* Since only the fractional part of the mantissa is stored and
......
......@@ -23,7 +23,7 @@
/* Note the full page bits must be in the same location as for normal
* 4k pages as the same assembly will be used to insert 64K pages
* wether the kernel has CONFIG_PPC_64K_PAGES or not
* whether the kernel has CONFIG_PPC_64K_PAGES or not
*/
#define _PAGE_F_SECOND 0x00008000 /* full page: hidx bits */
#define _PAGE_F_GIX 0x00007000 /* full page: hidx bits */
......
......@@ -132,7 +132,7 @@
*
* At this point, the OF driver seems to have a limitation on transfer
* sizes of 0xd bytes on reads and 0x5 bytes on writes. I do not know
* wether this is just an OF limit due to some temporary buffer size
* whether this is just an OF limit due to some temporary buffer size
* or if this is an SMU imposed limit. This driver has the same limitation
* for now as I use a 0x10 bytes temporary buffer as well
*
......@@ -236,7 +236,7 @@
* 3 (optional): enable nmi? [0x00 or 0x01]
*
* Returns:
* If parameter 2 is 0x00 and parameter 3 is not specified, returns wether
* If parameter 2 is 0x00 and parameter 3 is not specified, returns whether
* NMI is enabled. Otherwise unknown.
*/
#define SMU_CMD_MISC_df_NMI_OPTION 0x04
......
......@@ -387,7 +387,7 @@ void __init find_legacy_serial_ports(void)
of_node_put(parent);
continue;
}
/* Check for known pciclass, and also check wether we have
/* Check for known pciclass, and also check whether we have
* a device with child nodes for ports or not
*/
if (of_device_is_compatible(np, "pciclass,0700") ||
......
......@@ -82,7 +82,7 @@ static int __devinit of_pci_phb_probe(struct platform_device *dev)
return -ENXIO;
/* Claim resources. This might need some rework as well depending
* wether we are doing probe-only or not, like assigning unassigned
* whether we are doing probe-only or not, like assigning unassigned
* resources etc...
*/
pcibios_claim_one_bus(phb->bus);
......
......@@ -83,7 +83,7 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
* the context). This is very important because we must ensure we
* don't lose the VRSAVE content that may have been set prior to
* the process doing its first vector operation
* Userland shall check AT_HWCAP to know wether it can rely on the
* Userland shall check AT_HWCAP to know whether it can rely on the
* v_regs pointer or not
*/
#ifdef CONFIG_ALTIVEC
......
......@@ -722,7 +722,7 @@ void slice_set_range_psize(struct mm_struct *mm, unsigned long start,
}
/*
* is_hugepage_only_range() is used by generic code to verify wether
* is_hugepage_only_range() is used by generic code to verify whether
* a normal mmap mapping (non hugetlbfs) is valid on a given area.
*
* until the generic code provides a more generic hook and/or starts
......
......@@ -526,7 +526,7 @@ EXPORT_SYMBOL(mpc52xx_gpt_timer_period);
#define WDT_IDENTITY "mpc52xx watchdog on GPT0"
/* wdt_is_active stores wether or not the /dev/watchdog device is opened */
/* wdt_is_active stores whether or not the /dev/watchdog device is opened */
static unsigned long wdt_is_active;
/* wdt-capable gpt */
......
......@@ -728,7 +728,7 @@ static struct cbe_iommu * __init cell_iommu_alloc(struct device_node *np)
nid, np->full_name);
/* XXX todo: If we can have multiple windows on the same IOMMU, which
* isn't the case today, we probably want here to check wether the
* isn't the case today, we probably want here to check whether the
* iommu for that node is already setup.
* However, there might be issue with getting the size right so let's
* ignore that for now. We might want to completely get rid of the
......
......@@ -148,7 +148,7 @@ static int spider_set_irq_type(struct irq_data *d, unsigned int type)
/* Configure the source. One gross hack that was there before and
* that I've kept around is the priority to the BE which I set to
* be the same as the interrupt source number. I don't know wether
* be the same as the interrupt source number. I don't know whether
* that's supposed to make any kind of sense however, we'll have to
* decide that, but for now, I'm not changing the behaviour.
*/
......@@ -220,7 +220,7 @@ static void spider_irq_cascade(unsigned int irq, struct irq_desc *desc)
/* For hooking up the cascace we have a problem. Our device-tree is
* crap and we don't know on which BE iic interrupt we are hooked on at
* least not the "standard" way. We can reconstitute it based on two
* informations though: which BE node we are connected to and wether
* informations though: which BE node we are connected to and whether
* we are connected to IOIF0 or IOIF1. Right now, we really only care
* about the IBM cell blade and we know that its firmware gives us an
* interrupt-map property which is pretty strange.
......@@ -232,7 +232,7 @@ static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic)
int imaplen, intsize, unit;
struct device_node *iic;
/* First, we check wether we have a real "interrupts" in the device
/* First, we check whether we have a real "interrupts" in the device
* tree in case the device-tree is ever fixed
*/
struct of_irq oirq;
......
......@@ -529,7 +529,7 @@ static int __init pmac_pic_probe_mpic(void)
void __init pmac_pic_init(void)
{
/* We configure the OF parsing based on our oldworld vs. newworld
* platform type and wether we were booted by BootX.
* platform type and whether we were booted by BootX.
*/
#ifdef CONFIG_PPC32
if (!pmac_newworld)
......
......@@ -1648,7 +1648,7 @@ static int evergreen_cp_resume(struct radeon_device *rdev)
ring->wptr = 0;
WREG32(CP_RB_WPTR, ring->wptr);
/* set the wb address wether it's enabled or not */
/* set the wb address whether it's enabled or not */
WREG32(CP_RB_RPTR_ADDR,
((rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFFFFFFFC));
WREG32(CP_RB_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFF);
......
......@@ -1059,7 +1059,7 @@ static int cayman_cp_resume(struct radeon_device *rdev)
WREG32(CP_DEBUG, (1 << 27));
/* set the wb address wether it's enabled or not */
/* set the wb address whether it's enabled or not */
WREG32(SCRATCH_ADDR, ((rdev->wb.gpu_addr + RADEON_WB_SCRATCH_OFFSET) >> 8) & 0xFFFFFFFF);
WREG32(SCRATCH_UMSK, 0xff);
......@@ -1076,7 +1076,7 @@ static int cayman_cp_resume(struct radeon_device *rdev)
#endif
WREG32(cp_rb_cntl[i], rb_cntl);
/* set the wb address wether it's enabled or not */
/* set the wb address whether it's enabled or not */
addr = rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET;
WREG32(cp_rb_rptr_addr[i], addr & 0xFFFFFFFC);
WREG32(cp_rb_rptr_addr_hi[i], upper_32_bits(addr) & 0xFF);
......
......@@ -2007,7 +2007,7 @@ static int si_cp_resume(struct radeon_device *rdev)
ring->wptr = 0;
WREG32(CP_RB0_WPTR, ring->wptr);
/* set the wb address wether it's enabled or not */
/* set the wb address whether it's enabled or not */
WREG32(CP_RB0_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFFFFFFFC);
WREG32(CP_RB0_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFF);
......@@ -2040,7 +2040,7 @@ static int si_cp_resume(struct radeon_device *rdev)
ring->wptr = 0;
WREG32(CP_RB1_WPTR, ring->wptr);
/* set the wb address wether it's enabled or not */
/* set the wb address whether it's enabled or not */
WREG32(CP_RB1_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP1_RPTR_OFFSET) & 0xFFFFFFFC);
WREG32(CP_RB1_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP1_RPTR_OFFSET) & 0xFF);
......@@ -2066,7 +2066,7 @@ static int si_cp_resume(struct radeon_device *rdev)
ring->wptr = 0;
WREG32(CP_RB2_WPTR, ring->wptr);
/* set the wb address wether it's enabled or not */
/* set the wb address whether it's enabled or not */
WREG32(CP_RB2_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP2_RPTR_OFFSET) & 0xFFFFFFFC);
WREG32(CP_RB2_RPTR_ADDR_HI, upper_32_bits(rdev->wb.gpu_addr + RADEON_WB_CP2_RPTR_OFFSET) & 0xFF);
......
......@@ -304,7 +304,7 @@ static void i2c_nuc900_irq_nextbyte(struct nuc900_i2c *i2c,
case STATE_READ:
/* we have a byte of data in the data register, do
* something with it, and then work out wether we are
* something with it, and then work out whether we are
* going to do any more read/write
*/
......
......@@ -208,7 +208,7 @@ static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
if (msg->flags & I2C_M_REV_DIR_ADDR)
addr ^= 1;
/* todo - check for wether ack wanted or not */
/* todo - check for whether ack wanted or not */
s3c24xx_i2c_enable_ack(i2c);
iiccon = readl(i2c->regs + S3C2410_IICCON);
......@@ -397,7 +397,7 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
case STATE_READ:
/* we have a byte of data in the data register, do
* something with it, and then work out wether we are
* something with it, and then work out whether we are
* going to do any more read/write
*/
......
......@@ -219,7 +219,7 @@ static int platram_probe(struct platform_device *pdev)
platram_setrw(info, PLATRAM_RW);
/* check to see if there are any available partitions, or wether
/* check to see if there are any available partitions, or whether
* to add this device whole */
err = mtd_device_parse_register(info->mtd, pdata->probes, NULL,
......
......@@ -879,7 +879,7 @@ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
if (chip->ecc.mode != NAND_ECC_HW)
return;
/* change the behaviour depending on wether we are using
/* change the behaviour depending on whether we are using
* the large or small page nand device */
if (chip->page_shift > 10) {
......
......@@ -109,7 +109,7 @@ static inline struct ax_device *to_ax_dev(struct net_device *dev)
/*
* ax_initial_check
*
* do an initial probe for the card to check wether it exists
* do an initial probe for the card to check whether it exists
* and is functional
*/
static int ax_initial_check(struct net_device *dev)
......
......@@ -27,7 +27,7 @@ struct mcp_gen_header {
*
* Fields below this comment are extensions added in later versions
* of this struct, drivers should compare the header_length against
* offsetof(field) to check wether a given MCP implements them.
* offsetof(field) to check whether a given MCP implements them.
*
* Never remove any field. Keep everything naturally align.
*/
......
......@@ -608,7 +608,7 @@ static int bcm5421_poll_link(struct mii_phy* phy)
if ( mode == BCM54XX_COPPER)
return genmii_poll_link(phy);
/* try to find out wether we have a link */
/* try to find out whether we have a link */
phy_write(phy, MII_NCONFIG, 0x2000);
phy_reg = phy_read(phy, MII_NCONFIG);
......@@ -634,7 +634,7 @@ static int bcm5421_read_link(struct mii_phy* phy)
phy->speed = SPEED_1000;
/* find out wether we are running half- or full duplex */
/* find out whether we are running half- or full duplex */
phy_write(phy, MII_NCONFIG, 0x2000);
phy_reg = phy_read(phy, MII_NCONFIG);
......@@ -681,7 +681,7 @@ static int bcm5461_poll_link(struct mii_phy* phy)
if ( mode == BCM54XX_COPPER)
return genmii_poll_link(phy);
/* find out wether we have a link */
/* find out whether we have a link */
phy_write(phy, MII_NCONFIG, 0x7000);
phy_reg = phy_read(phy, MII_NCONFIG);
......@@ -710,7 +710,7 @@ static int bcm5461_read_link(struct mii_phy* phy)
phy->speed = SPEED_1000;
/* find out wether we are running half- or full duplex */
/* find out whether we are running half- or full duplex */
phy_write(phy, MII_NCONFIG, 0x7000);
phy_reg = phy_read(phy, MII_NCONFIG);
......
......@@ -118,7 +118,7 @@ isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[],
return ret;
}
/* simple check to see wether we have a isl1208 */
/* simple check to see whether we have a isl1208 */
static int
isl1208_i2c_validate_client(struct i2c_client *client)
{
......
......@@ -186,7 +186,7 @@ static int s3c_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
rtc_tm->tm_year = readb(base + S3C2410_RTCYEAR);
rtc_tm->tm_sec = readb(base + S3C2410_RTCSEC);
/* the only way to work out wether the system was mid-update
/* the only way to work out whether the system was mid-update
* when we read it is to check the second counter, and if it
* is zero, then we re-try the entire read
*/
......
......@@ -1344,7 +1344,7 @@ dasd_get_feature(struct ccw_device *cdev, int feature)
/*
* Set / reset given feature.
* Flag indicates wether to set (!=0) or the reset (=0) the feature.
* Flag indicates whether to set (!=0) or the reset (=0) the feature.
*/
int
dasd_set_feature(struct ccw_device *cdev, int feature, int flag)
......
......@@ -883,7 +883,7 @@ static void rts51x_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
} else {
US_DEBUGP("%s: NOT working scsi, not SS\n", __func__);
chip->proto_handler_backup(srb, us);
/* Check wether card is plugged in */
/* Check whether card is plugged in */
if (srb->cmnd[0] == TEST_UNIT_READY) {
if (srb->result == SAM_STAT_GOOD) {
SET_LUN_READY(chip, srb->device->lun);
......
......@@ -212,7 +212,7 @@ static long booke_wdt_ioctl(struct file *file,
return 0;
}
/* wdt_is_active stores wether or not the /dev/watchdog device is opened */
/* wdt_is_active stores whether or not the /dev/watchdog device is opened */
static unsigned long wdt_is_active;
static int booke_wdt_open(struct inode *inode, struct file *file)
......
......@@ -3888,7 +3888,7 @@ static int flush_space(struct btrfs_root *root,
* @root - the root we're allocating for
* @block_rsv - the block_rsv we're allocating for
* @orig_bytes - the number of bytes we want
* @flush - wether or not we can flush to make our reservation
* @flush - whether or not we can flush to make our reservation
*
* This will reserve orgi_bytes number of bytes from the space info associated
* with the block_rsv. If there is not enough space it will make an attempt to
......
......@@ -76,7 +76,7 @@ struct btrfs_ordered_sum {
#define BTRFS_ORDERED_IOERR 6 /* We had an io error when writing this out */
#define BTRFS_ORDERED_UPDATED_ISIZE 7 /* indicates wether this ordered extent
#define BTRFS_ORDERED_UPDATED_ISIZE 7 /* indicates whether this ordered extent
* has done its due diligence in updating
* the isize. */
......
......@@ -2455,7 +2455,7 @@ TAS_BUFFER_FNS(Uninit, uninit)
BUFFER_FNS(Da_Mapped, da_mapped)
/*
* Add new method to test wether block and inode bitmaps are properly
* Add new method to test whether block and inode bitmaps are properly
* initialized. With uninit_bg reading the block from disk is not enough
* to mark the bitmap uptodate. We need to also zero-out the bitmap
*/
......
......@@ -22,7 +22,7 @@ static long do_sys_name_to_handle(struct path *path,
struct file_handle *handle = NULL;
/*
* We need t make sure wether the file system
* We need to make sure whether the file system
* support decoding of the file handle
*/
if (!path->dentry->d_sb->s_export_op ||
......@@ -40,7 +40,7 @@ static long do_sys_name_to_handle(struct path *path,
if (!handle)
return -ENOMEM;
/* convert handle size to multiple of sizeof(u32) */
/* convert handle size to multiple of sizeof(u32) */
handle_dwords = f_handle.handle_bytes >> 2;
/* we ask for a non connected handle */
......
......@@ -1259,7 +1259,7 @@ int journal_forget (handle_t *handle, struct buffer_head *bh)
goto not_jbd;
}
/* keep track of wether or not this transaction modified us */
/* keep track of whether or not this transaction modified us */
was_modified = jh->b_modified;
/*
......
......@@ -1261,7 +1261,7 @@ int jbd2_journal_forget (handle_t *handle, struct buffer_head *bh)
goto not_jbd;
}
/* keep track of wether or not this transaction modified us */
/* keep track of whether or not this transaction modified us */
was_modified = jh->b_modified;
/*
......
......@@ -33,7 +33,7 @@
* are being written out - and waiting for GC to make progress, naturally.
*
* So we cannot just call iget() or some variant of it, but first have to check
* wether the inode in question might be in I_FREEING state. Therefore we
* whether the inode in question might be in I_FREEING state. Therefore we
* maintain our own per-sb list of "almost deleted" inodes and check against
* that list first. Normally this should be at most 1-2 entries long.
*
......
......@@ -52,8 +52,8 @@ We replicate IO (more or less synchronously) to local and remote disk.
For crash recovery after replication node failure,
we need to resync all regions that have been target of in-flight WRITE IO
(in use, or "hot", regions), as we don't know wether or not those WRITEs have
made it to stable storage.
(in use, or "hot", regions), as we don't know whether or not those WRITEs
have made it to stable storage.
To avoid a "full resync", we need to persistently track these regions.
......
......@@ -78,7 +78,7 @@ extern void vga_set_legacy_decoding(struct pci_dev *pdev,
* This function acquires VGA resources for the given
* card and mark those resources locked. If the resource requested
* are "normal" (and not legacy) resources, the arbiter will first check
* wether the card is doing legacy decoding for that type of resource. If
* whether the card is doing legacy decoding for that type of resource. If
* yes, the lock is "converted" into a legacy resource lock.
* The arbiter will first look for all VGA cards that might conflict
* and disable their IOs and/or Memory access, including VGA forwarding
......@@ -89,7 +89,7 @@ extern void vga_set_legacy_decoding(struct pci_dev *pdev,
* This function will block if some conflicting card is already locking
* one of the required resources (or any resource on a different bus
* segment, since P2P bridges don't differenciate VGA memory and IO
* afaik). You can indicate wether this blocking should be interruptible
* afaik). You can indicate whether this blocking should be interruptible
* by a signal (for userland interface) or not.
* Must not be called at interrupt time or in atomic context.
* If the card already owns the resources, the function succeeds.
......
......@@ -105,7 +105,7 @@ struct watchdog_device {
#define WATCHDOG_NOWAYOUT_INIT_STATUS 0
#endif
/* Use the following function to check wether or not the watchdog is active */
/* Use the following function to check whether or not the watchdog is active */
static inline bool watchdog_active(struct watchdog_device *wdd)
{
return test_bit(WDOG_ACTIVE, &wdd->status);
......
......@@ -213,7 +213,7 @@ struct cg_proto;
* @sk_sndbuf: size of send buffer in bytes
* @sk_flags: %SO_LINGER (l_onoff), %SO_BROADCAST, %SO_KEEPALIVE,
* %SO_OOBINLINE settings, %SO_TIMESTAMPING settings
* @sk_no_check: %SO_NO_CHECK setting, wether or not checkup packets
* @sk_no_check: %SO_NO_CHECK setting, whether or not checkup packets
* @sk_route_caps: route capabilities (e.g. %NETIF_F_TSO)
* @sk_route_nocaps: forbidden route capabilities (e.g NETIF_F_GSO_MASK)
* @sk_gso_type: GSO type (e.g. %SKB_GSO_TCPV4)
......
......@@ -397,7 +397,7 @@ static inline void can_rcvlist_sff_proc_show_one(struct seq_file *m,
int i;
int all_empty = 1;
/* check wether at least one list is non-empty */
/* check whether at least one list is non-empty */
for (i = 0; i < 0x800; i++)
if (!hlist_empty(&d->rx_sff[i])) {
all_empty = 0;
......
......@@ -2291,7 +2291,7 @@ static void snd_es1968_chip_init(struct es1968 *chip)
outb(0x88, iobase+0x1f);
/* it appears some maestros (dell 7500) only work if these are set,
regardless of wether we use the assp or not. */
regardless of whether we use the assp or not. */
outb(0, iobase + ASSP_CONTROL_B);
outb(3, iobase + ASSP_CONTROL_A); /* M: Reserved bits... */
......
......@@ -675,7 +675,7 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev,
*/
int snd_usb_is_big_endian_format(struct snd_usb_audio *chip, struct audioformat *fp)
{
/* it depends on altsetting wether the device is big-endian or not */
/* it depends on altsetting whether the device is big-endian or not */
switch (chip->usb_id) {
case USB_ID(0x0763, 0x2001): /* M-Audio Quattro: captured data only */
if (fp->altsetting == 2 || fp->altsetting == 3 ||
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册