提交 46e2856b 编写于 作者: I Ilia Lin 提交者: Rafael J. Wysocki

cpufreq: Add Kryo CPU scaling driver

In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors,
the CPU frequency subset and voltage value of each OPP varies
based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables
defines the voltage and frequency value based on the msm-id in SMEM
and speedbin blown in the efuse combination.
The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
to provide the OPP framework with required information.
This is used to determine the voltage and frequency value for each OPP of
operating-points-v2 table when it is parsed by the OPP framework.
Signed-off-by: NIlia Lin <ilialin@codeaurora.org>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NAmit Kucheria <amit.kucheria@linaro.org>
Tested-by: NAmit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
上级 cc85de36
......@@ -11653,6 +11653,13 @@ F: Documentation/devicetree/bindings/media/qcom,camss.txt
F: Documentation/media/v4l-drivers/qcom_camss.rst
F: drivers/media/platform/qcom/camss-8x16/
QUALCOMM CPUFREQ DRIVER MSM8996/APQ8096
M: Ilia Lin <ilia.lin@gmail.com>
L: linux-pm@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/opp/kryo-cpufreq.txt
F: drivers/cpufreq/qcom-cpufreq-kryo.c
QUALCOMM EMAC GIGABIT ETHERNET DRIVER
M: Timur Tabi <timur@codeaurora.org>
L: netdev@vger.kernel.org
......
......@@ -124,6 +124,17 @@ config ARM_OMAP2PLUS_CPUFREQ
depends on ARCH_OMAP2PLUS
default ARCH_OMAP2PLUS
config ARM_QCOM_CPUFREQ_KRYO
bool "Qualcomm Kryo based CPUFreq"
depends on ARM64
depends on QCOM_QFPROM
depends on QCOM_SMEM
select PM_OPP
help
This adds the CPUFreq driver for Qualcomm Kryo SoC based boards.
If in doubt, say N.
config ARM_S3C_CPUFREQ
bool
help
......
......@@ -65,6 +65,7 @@ obj-$(CONFIG_MACH_MVEBU_V7) += mvebu-cpufreq.o
obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o
obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
obj-$(CONFIG_ARM_QCOM_CPUFREQ_KRYO) += qcom-cpufreq-kryo.o
obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o
obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o
obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
......
......@@ -116,6 +116,9 @@ static const struct of_device_id blacklist[] __initconst = {
{ .compatible = "nvidia,tegra124", },
{ .compatible = "qcom,apq8096", },
{ .compatible = "qcom,msm8996", },
{ .compatible = "st,stih407", },
{ .compatible = "st,stih410", },
......
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2018, The Linux Foundation. All rights reserved.
*/
/*
* In Certain QCOM SoCs like apq8096 and msm8996 that have KRYO processors,
* the CPU frequency subset and voltage value of each OPP varies
* based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables
* defines the voltage and frequency value based on the msm-id in SMEM
* and speedbin blown in the efuse combination.
* The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
* to provide the OPP framework with required information.
* This is used to determine the voltage and frequency value for each OPP of
* operating-points-v2 table when it is parsed by the OPP framework.
*/
#include <linux/cpu.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/nvmem-consumer.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_opp.h>
#include <linux/slab.h>
#include <linux/soc/qcom/smem.h>
#define MSM_ID_SMEM 137
enum _msm_id {
MSM8996V3 = 0xF6ul,
APQ8096V3 = 0x123ul,
MSM8996SG = 0x131ul,
APQ8096SG = 0x138ul,
};
enum _msm8996_version {
MSM8996_V3,
MSM8996_SG,
NUM_OF_MSM8996_VERSIONS,
};
static enum _msm8996_version __init qcom_cpufreq_kryo_get_msm_id(void)
{
size_t len;
u32 *msm_id;
enum _msm8996_version version;
msm_id = qcom_smem_get(QCOM_SMEM_HOST_ANY, MSM_ID_SMEM, &len);
if (IS_ERR(msm_id))
return NUM_OF_MSM8996_VERSIONS;
/* The first 4 bytes are format, next to them is the actual msm-id */
msm_id++;
switch ((enum _msm_id)*msm_id) {
case MSM8996V3:
case APQ8096V3:
version = MSM8996_V3;
break;
case MSM8996SG:
case APQ8096SG:
version = MSM8996_SG;
break;
default:
version = NUM_OF_MSM8996_VERSIONS;
}
return version;
}
static int qcom_cpufreq_kryo_probe(struct platform_device *pdev)
{
struct opp_table *opp_tables[NR_CPUS] = {0};
struct platform_device *cpufreq_dt_pdev;
enum _msm8996_version msm8996_version;
struct nvmem_cell *speedbin_nvmem;
struct device_node *np;
struct device *cpu_dev;
unsigned cpu;
u8 *speedbin;
u32 versions;
size_t len;
int ret;
cpu_dev = get_cpu_device(0);
if (NULL == cpu_dev)
ret = -ENODEV;
msm8996_version = qcom_cpufreq_kryo_get_msm_id();
if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
dev_err(cpu_dev, "Not Snapdragon 820/821!");
return -ENODEV;
}
np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
if (IS_ERR(np))
return PTR_ERR(np);
ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu");
if (!ret) {
of_node_put(np);
return -ENOENT;
}
speedbin_nvmem = of_nvmem_cell_get(np, NULL);
of_node_put(np);
if (IS_ERR(speedbin_nvmem)) {
dev_err(cpu_dev, "Could not get nvmem cell: %ld\n",
PTR_ERR(speedbin_nvmem));
return PTR_ERR(speedbin_nvmem);
}
speedbin = nvmem_cell_read(speedbin_nvmem, &len);
nvmem_cell_put(speedbin_nvmem);
switch (msm8996_version) {
case MSM8996_V3:
versions = 1 << (unsigned int)(*speedbin);
break;
case MSM8996_SG:
versions = 1 << ((unsigned int)(*speedbin) + 4);
break;
default:
BUG();
break;
}
for_each_possible_cpu(cpu) {
cpu_dev = get_cpu_device(cpu);
if (NULL == cpu_dev) {
ret = -ENODEV;
goto free_opp;
}
opp_tables[cpu] = dev_pm_opp_set_supported_hw(cpu_dev,
&versions, 1);
if (IS_ERR(opp_tables[cpu])) {
ret = PTR_ERR(opp_tables[cpu]);
dev_err(cpu_dev, "Failed to set supported hardware\n");
goto free_opp;
}
}
cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1,
NULL, 0);
if (!IS_ERR(cpufreq_dt_pdev))
return 0;
ret = PTR_ERR(cpufreq_dt_pdev);
dev_err(cpu_dev, "Failed to register platform device\n");
free_opp:
for_each_possible_cpu(cpu) {
if (IS_ERR_OR_NULL(opp_tables[cpu]))
break;
dev_pm_opp_put_supported_hw(opp_tables[cpu]);
}
return ret;
}
static struct platform_driver qcom_cpufreq_kryo_driver = {
.probe = qcom_cpufreq_kryo_probe,
.driver = {
.name = "qcom-cpufreq-kryo",
},
};
static const struct of_device_id qcom_cpufreq_kryo_match_list[] __initconst = {
{ .compatible = "qcom,apq8096", },
{ .compatible = "qcom,msm8996", },
};
/*
* Since the driver depends on smem and nvmem drivers, which may
* return EPROBE_DEFER, all the real activity is done in the probe,
* which may be defered as well. The init here is only registering
* the driver and the platform device.
*/
static int __init qcom_cpufreq_kryo_init(void)
{
struct device_node *np = of_find_node_by_path("/");
const struct of_device_id *match;
int ret;
if (!np)
return -ENODEV;
match = of_match_node(qcom_cpufreq_kryo_match_list, np);
of_node_put(np);
if (!match)
return -ENODEV;
ret = platform_driver_register(&qcom_cpufreq_kryo_driver);
if (unlikely(ret < 0))
return ret;
ret = PTR_ERR_OR_ZERO(platform_device_register_simple(
"qcom-cpufreq-kryo", -1, NULL, 0));
if (0 == ret)
return 0;
platform_driver_unregister(&qcom_cpufreq_kryo_driver);
return ret;
}
module_init(qcom_cpufreq_kryo_init);
MODULE_DESCRIPTION("Qualcomm Technologies, Inc. Kryo CPUfreq driver");
MODULE_LICENSE("GPL v2");
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册