提交 438196c3 编写于 作者: S Shawn Guo

ARM: imx: eliminate macro IRQ_GPIOx()

This patch changes all the static gpio irq number assigning with
IRQ_GPIOA() ... IRQ_GPIOF() to run-time assigning with gpio_to_irq
call, and in turn eliminates these macros.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Acked-by: NDong Aisheng <dong.aisheng@linaro.org>
上级 ed175343
......@@ -266,7 +266,7 @@ static struct spi_board_info __maybe_unused
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 1500000,
.irq = IRQ_GPIOD(25),
/* irq number is run-time assigned */
.platform_data = &ads7846_config,
.mode = SPI_MODE_2,
},
......@@ -329,6 +329,7 @@ void __init eukrea_mbimx27_baseboard_init(void)
/* SPI_CS0 init */
mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
eukrea_mbimx27_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(4, 25));
spi_register_board_info(eukrea_mbimx27_spi_board_info,
ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
......
......@@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/dm9000.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <asm/mach-types.h>
......@@ -87,8 +88,7 @@ static struct resource dm9000_resources[] = {
.end = MX1_CS4_PHYS + 0x00C00003,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_GPIOB(14),
.end = IRQ_GPIOB(14),
/* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
......@@ -129,6 +129,8 @@ static void __init apf9328_init(void)
imx1_add_imx_i2c(&apf9328_i2c_data);
dm9000_resources[2].start = gpio_to_irq(IMX_GPIO_NR(2, 14));
dm9000_resources[2].end = gpio_to_irq(IMX_GPIO_NR(2, 14));
platform_add_devices(devices, ARRAY_SIZE(devices));
}
......
......@@ -169,28 +169,28 @@ static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
static struct plat_serial8250_port serial_platform_data[] = {
{
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
.irq = IRQ_GPIOB(23),
/* irq number is run-time assigned */
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
.irq = IRQ_GPIOB(22),
/* irq number is run-time assigned */
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
.irq = IRQ_GPIOB(27),
/* irq number is run-time assigned */
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
.irq = IRQ_GPIOB(30),
/* irq number is run-time assigned */
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
......@@ -279,6 +279,10 @@ static void __init eukrea_cpuimx27_init(void)
#endif
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
serial_platform_data[0].irq = IMX_GPIO_NR(2, 23);
serial_platform_data[1].irq = IMX_GPIO_NR(2, 22);
serial_platform_data[2].irq = IMX_GPIO_NR(2, 27);
serial_platform_data[3].irq = IMX_GPIO_NR(2, 30);
platform_device_register(&serial_device);
#endif
......
......@@ -40,6 +40,7 @@
#include <asm/mach/time.h>
#include <asm/system.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux-mx27.h>
#include "devices-imx27.h"
......@@ -47,7 +48,7 @@
#define TVP5150_RSTN (GPIO_PORTC + 18)
#define TVP5150_PWDN (GPIO_PORTC + 19)
#define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
#define SDHC1_IRQ IRQ_GPIOB(25)
#define SDHC1_IRQ_GPIO IMX_GPIO_NR(2, 25)
#define MOTHERBOARD_BIT2 (GPIO_PORTD + 31)
#define MOTHERBOARD_BIT1 (GPIO_PORTD + 30)
......@@ -294,14 +295,14 @@ static int visstrim_m10_sdhc1_init(struct device *dev,
{
int ret;
ret = request_irq(SDHC1_IRQ, detect_irq, IRQF_TRIGGER_FALLING,
"mmc-detect", data);
ret = request_irq(gpio_to_irq(SDHC1_IRQ_GPIO), detect_irq,
IRQF_TRIGGER_FALLING, "mmc-detect", data);
return ret;
}
static void visstrim_m10_sdhc1_exit(struct device *dev, void *data)
{
free_irq(SDHC1_IRQ, data);
free_irq(gpio_to_irq(SDHC1_IRQ_GPIO), data);
}
static const struct imxmmc_platform_data visstrim_m10_sdhc_pdata __initconst = {
......
......@@ -38,7 +38,7 @@
(MX21ADS_MMIO_BASE_ADDR + (offset))
#define MX21ADS_CS8900A_MMIO_SIZE 0x200000
#define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11)
#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11)
#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000)
#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000)
......@@ -159,9 +159,10 @@ static struct platform_device mx21ads_nor_mtd_device = {
.resource = &mx21ads_flash_resource,
};
static const struct resource mx21ads_cs8900_resources[] __initconst = {
static struct resource mx21ads_cs8900_resources[] __initdata = {
DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, MX21ADS_CS8900A_MMIO_SIZE),
DEFINE_RES_IRQ(MX21ADS_CS8900A_IRQ),
/* irq number is run-time assigned */
DEFINE_RES_IRQ(-1),
};
static const struct platform_device_info mx21ads_cs8900_devinfo __initconst = {
......@@ -241,13 +242,13 @@ static int mx21ads_sdhc_get_ro(struct device *dev)
static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
return request_irq(IRQ_GPIOD(25), detect_irq,
return request_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), detect_irq,
IRQF_TRIGGER_FALLING, "mmc-detect", data);
}
static void mx21ads_sdhc_exit(struct device *dev, void *data)
{
free_irq(IRQ_GPIOD(25), data);
free_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), data);
}
static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = {
......@@ -304,6 +305,11 @@ static void __init mx21ads_board_init(void)
imx21_add_mxc_nand(&mx21ads_nand_board_info);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
mx21ads_cs8900_resources[1].start =
gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO);
mx21ads_cs8900_resources[1].end =
gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO);
platform_device_register_full(&mx21ads_cs8900_devinfo);
}
......
......@@ -246,25 +246,25 @@ static const struct imx_fb_platform_data mx27ads_fb_data __initconst = {
static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING,
"sdhc1-card-detect", data);
return request_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), detect_irq,
IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
}
static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING,
"sdhc2-card-detect", data);
return request_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), detect_irq,
IRQF_TRIGGER_RISING, "sdhc2-card-detect", data);
}
static void mx27ads_sdhc1_exit(struct device *dev, void *data)
{
free_irq(IRQ_GPIOE(21), data);
free_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), data);
}
static void mx27ads_sdhc2_exit(struct device *dev, void *data)
{
free_irq(IRQ_GPIOB(7), data);
free_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), data);
}
static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
......
......@@ -213,13 +213,13 @@ static const struct imx_fb_platform_data mxt_td60_fb_data __initconst = {
static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
return request_irq(IRQ_GPIOF(8), detect_irq, IRQF_TRIGGER_FALLING,
"sdhc1-card-detect", data);
return request_irq(gpio_to_irq(IMX_GPIO_NR(6, 8)), detect_irq,
IRQF_TRIGGER_FALLING, "sdhc1-card-detect", data);
}
static void mxt_td60_sdhc1_exit(struct device *dev, void *data)
{
free_irq(IRQ_GPIOF(8), data);
free_irq(gpio_to_irq(IMX_GPIO_NR(6, 8)), data);
}
static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
......
......@@ -245,7 +245,7 @@ static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
{
int ret;
ret = request_irq(IRQ_GPIOC(29), detect_irq,
ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"imx-mmc-detect", data);
if (ret)
......@@ -257,7 +257,7 @@ static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
static void pca100_sdhc2_exit(struct device *dev, void *data)
{
free_irq(IRQ_GPIOC(29), data);
free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data);
}
static const struct imxmmc_platform_data sdhc_pdata __initconst = {
......
......@@ -27,6 +27,7 @@
#include <linux/mfd/mc13783.h>
#include <linux/spi/spi.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
......@@ -274,7 +275,7 @@ static struct mc13xxx_platform_data pcm038_pmic = {
static struct spi_board_info pcm038_spi_board_info[] __initdata = {
{
.modalias = "mc13783",
.irq = IRQ_GPIOB(23),
/* irq number is run-time assigned */
.max_speed_hz = 300000,
.bus_num = 0,
.chip_select = 0,
......@@ -325,6 +326,7 @@ static void __init pcm038_init(void)
mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
imx27_add_spi_imx0(&pcm038_spi0_data);
pcm038_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(2, 23));
spi_register_board_info(pcm038_spi_board_info,
ARRAY_SIZE(pcm038_spi_board_info));
......
......@@ -14,6 +14,7 @@
#include <linux/mtd/physmap.h>
#include <linux/interrupt.h>
#include <linux/dm9000.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
......@@ -78,8 +79,7 @@ static struct resource dm9000x_resources[] = {
.end = MX1_CS5_PHYS + 5,
.flags = IORESOURCE_MEM, /* data access */
}, {
.start = IRQ_GPIOC(3),
.end = IRQ_GPIOC(3),
/* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
},
};
......@@ -123,6 +123,8 @@ static void __init scb9328_init(void)
imx1_add_imx_uart0(&uart_pdata);
printk(KERN_INFO"Scb9328: Adding devices\n");
dm9000x_resources[2].start = gpio_to_irq(IMX_GPIO_NR(3, 3));
dm9000x_resources[2].end = gpio_to_irq(IMX_GPIO_NR(3, 3));
platform_add_devices(devices, ARRAY_SIZE(devices));
}
......
......@@ -95,14 +95,14 @@ static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void
{
int ret;
ret = request_irq(IRQ_GPIOC(29), detect_irq, IRQF_TRIGGER_FALLING,
"imx-mmc-detect", data);
ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq,
IRQF_TRIGGER_FALLING, "imx-mmc-detect", data);
if (ret)
return ret;
ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
if (ret) {
free_irq(IRQ_GPIOC(29), data);
free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data);
return ret;
}
......@@ -113,7 +113,7 @@ static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void
static void pcm970_sdhc2_exit(struct device *dev, void *data)
{
free_irq(IRQ_GPIOC(29), data);
free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data);
gpio_free(GPIO_PORTC + 28);
}
......@@ -192,8 +192,7 @@ static struct resource pcm970_sja1000_resources[] = {
.end = MX27_CS4_BASE_ADDR + 0x100 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_GPIOE(19),
.end = IRQ_GPIOE(19),
/* irq number is run-time assigned */
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
......@@ -227,5 +226,7 @@ void __init pcm970_baseboard_init(void)
imx27_add_imx_fb(&pcm038_fb_data);
mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
imx27_add_mxc_mmc(1, &sdhc_pdata);
pcm970_sja1000_resources[1].start = gpio_to_irq(IMX_GPIO_NR(5, 19));
pcm970_sja1000_resources[1].end = gpio_to_irq(IMX_GPIO_NR(5, 19));
platform_device_register(&pcm970_sja1000);
}
......@@ -85,13 +85,6 @@
#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT)
#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT)
#define IRQ_GPIOA(x) (MXC_GPIO_IRQ_START + x)
#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x)
#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x)
#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x)
#define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x)
#define IRQ_GPIOF(x) (IRQ_GPIOE(32) + x)
extern int mxc_gpio_mode(int gpio_mode);
extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
const char *label);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册