提交 3f2c7d5d 编写于 作者: H Helmut Grohne 提交者: Ulf Hansson

mmc: sdhci-of-arasan: Add quirk for unstable clocks

Some controllers immediately report SDHCI_CLOCK_INT_STABLE after
enabling the clock even when the clock is not stable. When used in
conjunction with older/slower cards, this can result in:

    mmc0: error -84 whilst initialising SD card

When the stable reporting is known to be broken, we simply wait for the
maximum stabilization period.
Signed-off-by: NHelmut Grohne <h.grohne@intenta.de>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
上级 26c31228
......@@ -102,6 +102,9 @@ struct sdhci_arasan_data {
/* Controller does not have CD wired and will not function normally without */
#define SDHCI_ARASAN_QUIRK_FORCE_CDTEST BIT(0)
/* Controller immediately reports SDHCI_CLOCK_INT_STABLE after enabling the
* internal clock even when the clock isn't stable */
#define SDHCI_ARASAN_QUIRK_CLOCK_UNSTABLE BIT(1)
};
static const struct sdhci_arasan_soc_ctl_map rk3399_soc_ctl_map = {
......@@ -207,6 +210,16 @@ static void sdhci_arasan_set_clock(struct sdhci_host *host, unsigned int clock)
sdhci_set_clock(host, clock);
if (sdhci_arasan->quirks & SDHCI_ARASAN_QUIRK_CLOCK_UNSTABLE)
/*
* Some controllers immediately report SDHCI_CLOCK_INT_STABLE
* after enabling the clock even though the clock is not
* stable. Trying to use a clock without waiting here results
* in EILSEQ while detecting some older/slower cards. The
* chosen delay is the maximum delay from sdhci_set_clock.
*/
msleep(20);
if (ctrl_phy) {
phy_power_on(sdhci_arasan->phy);
sdhci_arasan->is_phy_on = true;
......@@ -758,6 +771,9 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
if (of_property_read_bool(np, "xlnx,fails-without-test-cd"))
sdhci_arasan->quirks |= SDHCI_ARASAN_QUIRK_FORCE_CDTEST;
if (of_property_read_bool(np, "xlnx,int-clock-stable-broken"))
sdhci_arasan->quirks |= SDHCI_ARASAN_QUIRK_CLOCK_UNSTABLE;
pltfm_host->clk = clk_xin;
if (of_device_is_compatible(pdev->dev.of_node,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册